Scalping Trend with DSS and Pullbacks | Page 15 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Trying scalping with a 1000 bucks - Scalping is expensive! 39 replies

DSS Scalper forex System 2 replies

DSS Scalping system 5/15m TF 59 replies

Dss Bressert EA 13 replies

1M & 5M Scalping System (Scalping Paradise) 21 replies

Attachments: Scalping Trend with DSS and Pullbacks
Exit Attachments

Scalping Trend with DSS and Pullbacks

  • #281
  • Edited 11:31am Sep 25, 2015 11:13am | Edited 11:31am
My bands indi.

IMPORTANT!
g_ATRFactor set to 2
g_ATRPeriod set to 50
g_MAPeriod set to 50
g_MAMethod set to 0 (zero = SMA)

You can do the colors however you like.

Enjoy!

EDIT: I put a name for the indi, which is misleading. This ONLY plots the bands. Please apply 50 SMA manually from MT4.
Attached File(s)
File Type: mq4 21__ATRADJ_MA_CURVE.mq4   2 KB | 529 downloads
  • #282
  • Sep 25, 2015 1:21pm Sep 25, 2015 1:21pm
Quoting matheszabi
{quote} Install a firewall or use it. It is so annoying as I want to re-code those indicators!
Hi Matheszabi,

Thanks a lot for your answer. I'll try to run my firewall.

Best regards

BBF
BigBlackfeet Always on the(forex) war path !
  • #283
  • Sep 25, 2015 2:09pm Sep 25, 2015 2:09pm
Completely open source. Without opening a site.
The parameters are selected by the template of trikg. Especially fitted "DSS Bressert Colored" - only works with a parameter (8,13).
Thanks for trikg, matheszabi, rkp.
Attached File(s)
File Type: tpl _FF_.tpl   7 KB | 538 downloads
File Type: mq4 AtrAdj_MA_Curve.mq4   3 KB | 619 downloads
File Type: mq4 DSS Bressert Colored.mq4   3 KB | 672 downloads
File Type: mq4 MAOMAH.mq4   3 KB | 616 downloads
File Type: mq4 Average_Range.mq4   7 KB | 589 downloads
  • #284
  • Sep 25, 2015 2:32pm Sep 25, 2015 2:32pm
Quoting rkp
My bands indi. IMPORTANT! g_ATRFactor set to 2 g_ATRPeriod set to 50 g_MAPeriod set to 50 g_MAMethod set to 0 (zero = SMA) You can do the colors however you like. Enjoy! EDIT: I put a name for the indi, which is misleading. This ONLY plots the bands. Please apply 50 SMA manually from MT4. {file}
Thanks,
Modified your code: added the SMA, locked the Method to SMA, added colors, set default values, just the middle line width needed to set to 2 to be identic otherwise is the same now, except it will not launch the browser to FXGlow!

Attached Image (click to enlarge)
Click to Enlarge Name: targetBands.png Size: 101 KB


So that ATR left to re-code it: Average Range-Multi
Since I have seen many is using here, probably has somebody the source!
Attached File(s)
File Type: mq4 TargetBandsFF.mq4   2 KB | 631 downloads
I want to buy PATIENCE
  • #285
  • Edited 3:19pm Sep 25, 2015 2:38pm | Edited 3:19pm
Quoting bc2
Completely open source. Without opening a site. The parameters are selected by the template of trikg. Especially fitted "DSS Bressert Colored" - only works with a parameter (8,13). Thanks for trikg, matheszabi, rkp. {file} {file} {file} {file} {file}
Nice!

How you did it? - I couldn't find any decompiler


@trikg:
Could you please edit the first post on the thread and put there this files from bc2 (
I just renamed it, fixed some and packed
Attached File(s)
File Type: zip ScalpingTrend.zip   52 KB | 1,170 downloads



Now the indi list in completed, lets have optimized EA and balance results!
I want to buy PATIENCE
  • #286
  • Sep 25, 2015 4:31pm Sep 25, 2015 4:31pm
Here is a complete analog for Bressert Scalper Improved.ex4. Posted previously been fit for smoothing 8.
Attached File(s)
File Type: mq4 DSS Bressert Colored.mq4   3 KB | 702 downloads
  • #287
  • Edited 8:07pm Sep 25, 2015 7:27pm | Edited 8:07pm
Almost finished the EA, but sadly is to slow to optimize, because of to many
Inserted Code
iCustom
calls

Example entry condition:

4. DSS Dots went below 20 and color turns PINK


for that it seems need to call again the indicator with previous value.

Beside this is a pullback, so it needs a trending movement.

Paper traded the first day available from my chart on M1
2 loss, 3 win from London open ( red arrow) to NY open and a bit after ( blue arrow)
Attached Image (click to enlarge)
Click to Enlarge Name: GBPUSD.lmxM1.png Size: 182 KB

smooth_coefficient = 2.6 / (1.0 + EMA_period);
it skips the only one good trade

Attached Image (click to enlarge)
Click to Enlarge Name: GBPUSD.lmxM1_2png.png Size: 144 KB

Some others: it seems the London open it gives a loss, maybe the reverse direction needs to be taken.

My idea:
The Bressert /DDS can or shuld be used at SL : it seems a bit delayed , but it signals sooner the loss then the SL!

with pullback trading it should be used a zigzag indicator to get the HH, LL and watch the Fibo levels, ex 50%
I want to buy PATIENCE
  • #288
  • Sep 26, 2015 2:41am Sep 26, 2015 2:41am
Quoting matheszabi
Almost finished the EA, but sadly is to slow to optimize, because of to many iCustom calls
The best solution - to build the calculation in the EA. But it requires considerable effort. Therefore I propose to reduce the calculations in indicators. For the advisor does not need a beautiful view.
  • #289
  • Sep 27, 2015 4:56am Sep 27, 2015 4:56am
Quoting matheszabi
Almost finished the EA, but sadly is to slow to optimize, because of to many iCustom calls....
You don't need the iCustom calls any more. Look up in the thread - we have provided the source code. Just use the calculations (e.g. ATR adjusted value from the current one; no need to plot any lines).

When I get some free time I can code the EA BUT I doubt it is going to perform well since I think the best way for the system to be profitable is to set the S/L & T/P to areas of PPA (previous price action, i.e. clusters, S/R, etc), WHICH is extremely difficult to code (at least in MQL4).

There's no magic bullet/holy grail, you need to trade this manually. Yeah, there may be some way to get into hardcore C/C++ pattern rec, etc programming and recognize important levels but it's some undertaking and the system coded in such way may still fail to prove profitable.
  • #290
  • Sep 27, 2015 6:37am Sep 27, 2015 6:37am
Quoting rkp
{quote} you need to trade this manually
If the entry /exit rules are well defined, the indicators are well set why I need to trade manually?
For me it seems to transfer the responsibility to me, because I traded manually, not followed the system.

Or maybe from system rules are missing, indicators aren't working and has to much loss?
I want to buy PATIENCE
  • #291
  • Sep 27, 2015 3:27pm Sep 27, 2015 3:27pm
Quoting matheszabi
{quote} If the entry /exit rules are well defined, the indicators are well set why I need to trade manually? For me it seems to transfer the responsibility to me, because I traded manually, not followed the system. Or maybe from system rules are missing, indicators aren't working and has to much loss?
Hmm. On M1 the T/P & S/L are supposed to be 4-7 pips. I personally think that the correct value should depend on:

1. Volatility
2. Near S&R

So, how do we exactly set the T/P? It could be 4,5,6 or 7 pips... I manually look for S/R to the left and it it's somewhere within the 4-7 pip range I execute when rules are met.

I could however set it to 7 pips in the EA and then BE at +4 but I do feel I will get taken out way too often considering the small T/P... I'll try to code a dirty EA and run it thru high-quality data to see the results (when I get the time)
  • #292
  • Sep 29, 2015 8:52am Sep 29, 2015 8:52am
Quoting bc2
{quote} I got to rewrite "MA Histogram.ex4". Take it in the source code. (SMA5 On SMA100 Histo) {file}
The indicator is taxing the CPU too much, you are not returning rates_total in OnCalculate.
  • #293
  • Sep 29, 2015 8:53am Sep 29, 2015 8:53am
Quoting bc2
Here is a complete analog for Bressert Scalper Improved.ex4. Posted previously been fit for smoothing 8. {file}
Works well, thanks, but there is a possible division by zero (happened to me) on line 70.
  • #294
  • Sep 29, 2015 10:20am Sep 29, 2015 10:20am
Quoting Plague
{quote} The indicator is taxing the CPU too much, you are not returning rates_total in OnCalculate.
Thank you. This is my carelessness.

Quoting Plague
{quote} Works well, thanks, but there is a possible division by zero (happened to me) on line 70.
I'm not a professional programmer.
In this case I just upgraded the most likely indicator, picking up the necessary parameters. Division by zero error I have not encountered.
I think that this error is possible only in the period of the swap quotations. Chance coincidence highest price and lowest price for the period Stochastic_period very small.
Maybe later I'll rewrite indicator. If someone else does not do it before.
  • #295
  • Sep 30, 2015 2:39am Sep 30, 2015 2:39am
Quoting bc2
{quote} Thank you. This is my carelessness. {quote} I'm not a professional programmer. In this case I just upgraded the most likely indicator, picking up the necessary parameters. Division by zero error I have not encountered. I think that this error is possible only in the period of the swap quotations. Chance coincidence highest price and lowest price for the period Stochastic_period very small. Maybe later I'll rewrite indicator. If someone else does not do it before.
Oh you can simply change this
Inserted Code
MIT = delta/(HighRange-LowRange)*100.0;
to this
Inserted Code
double range = HighRange-LowRange;
if (range == 0) range = 0.00001;
MIT = delta/range*100.0;
  • #296
  • Sep 30, 2015 4:18am Sep 30, 2015 4:18am
Awesome job by the coders. The target band is a great indy. No matter if for entry, exit, stop, trailing stop. You name it. Looks so smooth and beautiful.
  • #297
  • Sep 30, 2015 4:42am Sep 30, 2015 4:42am
Sorry bc2 , matheszabi and other programmers ,
with all due respect for your work, but this is a thread about a manual /mechanical System , genially created by Trikg. If you want to develop an EA , please open a new discussion .
Trikg , are you agree with me ?
  • #298
  • Edited 9:01am Sep 30, 2015 8:31am | Edited 9:01am
Quoting redoktober
Sorry bc2 , matheszabi and other programmers , with all due respect for your work, but this is a thread about a manual /mechanical System , genially created by Trikg. If you want to develop an EA , please open a new discussion . Trikg , are you agree with me ?
If you actually read the discussion, I have already asked trikg for permission.

Edit: also we are rewriting indicators to not use advertisements
  • #299
  • Oct 1, 2015 4:25pm Oct 1, 2015 4:25pm
Hi, im back, will trade tomorrow.
Price is too tricky to handle
  • #300
  • Oct 1, 2015 5:38pm Oct 1, 2015 5:38pm
Quoting SeaTheStars
Awesome job by the coders. The target band is a great indy. No matter if for entry, exit, stop, trailing stop. You name it. Looks so smooth and beautiful.
Just try other pair, other time frame and you will see a parameter needs to be changed from 2.0 to 3.0 then to 4.0 than 5.0 and then you will ask "WTF?"
Especially if you can code an EA and test multiple pairs on more time frames, very fast

An EA will tell you how exactly clear are described the system entry-exit rules and how clearly is specified.
When you see something like that "don't trade blind" like in http://www.forexfactory.com/showthread.php?t=551382 -or maybe this- then you maybe do your own research and don't trust the system.
Let others present the winner trades only and make subscribers from novice players
I want to buy PATIENCE
3 traders viewing now