I will code your EAs and Indicators for no charge

Hello,

Please, could anyone add a shift code to the MA ea.

Many thanks to all.

gilfx

[highlight=rgba(255, 255, 255, 0)]Hi All...[/highlight]

[highlight=rgba(255, 255, 255, 0)]I am in need of an indicator that alerts (with push notifications) when the current bid price breaks the high and/or low of the current day. I have found indicators that alert when the current bid price exceeds previous day's lows or highs but could not locate one for the current day. I have exhausted my searches. [/highlight]

[highlight=rgba(255, 255, 255, 0)]kind regards.[/highlight]

I am looking for an ea that sets the stop of every trade on a particular pair to brake-even after X ammount of pips that i have predefined. The EA has to set a broker sl and it has to do that on every single trade that is opened on that particular pair, but it has to be able to work on other pairs also. For example I attach the EA on EURJPY and set 60pip sl and i also attach another same ea on EURUSD at 50pip and it must move every EURJPY open order to be at 60pip profit, and every eurusd order after 50pip. I may not be good at explanations but it is must be a very simple ea and you surely have somethin similar. Looking forward to hear from you, thanks

Can any one point me in the direction of how to edit a indicator to allow the indicator to plot last Variable (e.g 20) periods only. and to allow a shift
function also

e.g
100sMA ( shift function present)

or ichi

data to contain normal period history in calculation however to appear on graph only past 20 periods data.

many thanks.

abp.

up

This is a request for a trend EA.

- The basis for the trend definition is a D close above or below the 8lwma (set on close). So if the D closes above its 8lwma its buy only the next day and if the D closes below the 8lwma its sell only the next day.
- The 4hr 8lwma is added to filter out some of the short term CT moves against the D.
- Trades are entered from 1hr charts.

Entry rules - 1hr charts:

BUYS
- The 32lwma must be above the 192lwma (these approximate the 4hr and D 8lwma's)
- The signal candle must close above the 32lwma
- Price must have completed what I will call a 3 bar reversal. The idea being to buy dips in an uptrend. The 3 candle sequence must have a negative close dip and then a positive close. It will alert with an arrow up when the signal candle has closed above the previous two candle closes (one of the two prior must be a negative close). The arrow is placed below the candle that follows the signal candle.

See the reversal 3 bar indi attached. There are too many signals generated, some filters are needed. Firstly we have our trend filter from the D and 4hr 8lwma's which must be stacked correctly and price close above the 32lwma. In addition:
- MACD with standard settings 12, 26, 9. We want the histogram to confirm.
When MACD is above the zero line the histogram value must close higher than its previous bar and
when MACD is below the zero line the histogram must close with a smaller negative value i.e. closer to the 0 line than its previous bar.
The coloured MACD attached shows the red/green changes but the principle is the same as a standard MACD.
- One open trade per calendar day. If stopped out another trade may be opened.
- Price must go 1 pip above the signal candle high (bid price or 1 pip + spread) in the 2 candles following the close of the signal candle
- EA must have a time option not to enter trades, using fxpro for example for jpy, aud nzd pairs I would not trade between 22pm and close of 1am candle. Trying to be clear the 1am candle can qualify as a signal candle and trades taken after the 2am candle has opened. For GU, EUR etc I would not trade between 22pm and 7am.
- Stops x pips below the signal candle. If candle is overly large i.e. requiring a large stop then no trade to be opened, this value will need to be changed for each pair. So no trade if stop required is greater than x pips, will vary per pair.
- Target price, the ability to set a target price and if we get to within x pips of target price then no further trades to be opened, this will vary for each pair.

SELLS
- The 32lwma must be below the 192lwma (these approximate the 4hr and D 8lwma's)
- The signal candle must close below the 32lwma
- Price must have completed what I will call a 3 bar reversal. The idea being to sell rallies in a downtrend. 3 candles must have a positive close rally and then a negative close. The 3 bar reversal indicator will alert with an arrow down when the signal candle has closed below the previous two candle closes (one of the two prior must be a positive close). The arrow is placed above the candle that follows the signal candle.

The sell filters, firstly we have our trend filter from the D and 4hr 8lwma's which must be stacked correctly i.e. 32 below the 192 and price close below the 32lwma. In addition:
- MACD with standard settings 12, 26, 9. We want the histogram to confirm.
When MACD is below the zero line the histogram value must close lower than its previous bar and
when MACD is above the zero line the histogram must close with a smaller positive value i.e. closer to the 0 line than its previous bar.
- One open trade per calendar day. If stopped out another trade may be opened.
- Price must go 1 pip below the signal candle low in the 2 candles following the close of the signal candle
- EA must have a time option not to enter trades, see above.
- Stops x pips above the signal candle high. If candle is overly large i.e. requiring a large stop then no trade to be opened, this will need to be changed for each pair.
- Target price, the ability to set a target price and if we get to within x pips of target price then no further trades to be opened, this will need to be changed for each pair.

STOPS - x pips above/below the signal candle. Stops moving to x pips (input option) above/below the previous days close.
TAKE PROFIT - A multiple (option to vary input e.g. 1.5 or 2, 3) of D daily ATR (option to vary e.g. 14 day or 20 day) or once the target price mentioned above is reached. So if TP/target price was 150 pips on first trade and a 2nd trade entered 50 pips later that TP would be 100 pips.

I have attached a D chart with the closes above/below the 8lwma highlighted. I have attached some 1hr charts with all the 3 bar reversal signals and the same 1hr chart with the filters applied (for buys 32lwma above 192lwma, 3 bar reversal, candle close above 32lwma, price goes above the signal candle within the 2 bars that follow, MACD histo has a higher value above 50 level, first trade of the day taken) and the red line highlights the set up candle that meets all the filter requirements.

I have no idea of coding and admit this might be a mammoth undertaking. If someone can code this great. Suggestions from those that have good working options for trend trailing stops/take profits would be greatly appreciated.

The method in above post is designed to do relatively little damage when the D closes above/below its 8lwma and there is no follow through. The 4hr 8lwma would relatively quickly filter losing trades, not all of course but many.

This obviously is an example of what happens when things go to plan. EJ D closes positive above 8lwma on 11th, so from 12 its buy only. In terms of the above rules entries on 12 Nov around 133.40, 13 Nov 133.72 and 14 Nov 133.92. There would have been trades signalled for 15th but at 30 pips before the target price would not be triggered, if they were the TP would have been 30 pips but I haven't shown. A clear target price at the highs around 135.22 would give approx. 180, 150 and 130 pips for the above sequence. Stops moved below the previous days lows would not have been in danger.

Not all sequences will be as good as this but as any trend trader will know many are and as I said hopefully the filters envisaged will keep the damage acceptable when things not running so well.

Hi, Tigpips, what great work you do for the trading community.

I have a simple request, I am sure it has been done already but I need an EA the paints candles, according to its position above or below a SMA. For example if the price is above 21 SMA it is blus and below it is red. Only on the close of the bar does the colour not repaint. Can you , or anyone help... Thanks

Hello good people.

I would be most grateful if somebody could knock up a simple EA for me please that could be attached to a chart to monitor a particular trade (either by magic number. comment or ticket/order number), and put in a hedge trade when the original trade is X number of pips (user specify) in negative. Lot size for the hedge trade to be user specified as well. Many thanks

Hello,

Could anyone help me to modified this zigzag indi. i want to put 2 horizontal line base on last high and low also put an alert in few condition
1. when zigzag make a new line in low alert buy
2. when zigzag make a new line in high alert sell
3. when zigzag cross low horizontal line alert sell
4. when zigzag cross high horizontal line alert buy

thanks for anyone to help before and sory if my english was bad

Request to add alert to Jurik sooth ribbon indicator when the color changes.

Thanks for the coder.

Hi guys,

I would like to wish for a addition of a median to the FGDI indicator, used to calculate fractal dimension. The idea isnt by me but suggested by someone in TSD forums, who didnt have a coded version of it. It should be inserted around line 247 or 248 in metaeditor of FGDI indicator, whichever specific area of implementation is easier for coding is fine.

Thanks a million if this should be coded. You shall have my eternal gratitude



Thanks and regards,
Bananaman

Dear Gumrai,

I need EA based on attached two indicator. This method is described on thread http://www.forexfactory.com/showthread.php?t=291622

Buy order once following conditions full filled.

1 Tdi cross- Green crossing red with angle of 35(Angle parameter can be changed )

2 Synergy Blue candle should be 1st or second after cross of TDI (close of h4 candle) & last blue candle must be closed above 21pips to open price.

Sell order once following conditions full filled.

1 Tdi cross- Red crossing green with angle more than 3.5(Angle parameter can be changed )
2 Synergy Red candle should be 1st or second after cross of TDI (close of h4 candle)& last red candle must be closed below 21pips to open price.

Tp should be set in pips.

Initial stop loss should be set as low of previous candle.

Jumping Stop loss should be made of 30pips once price move 30pips in favor.

Option to set only buy order or only sell order or both order.

Option to set the trading hour based on broker time.

Option to close all the orders at set time.

Thank you very much for your support !

Thanks
Manoj

I might be able to code it. Sent you PM.

Sorry, but without the synergy APB source code, there is probably no way to use it in an EA. Mind you, I have not looked at the indicators.
From your conditions and requirements, it doesn't look to be a project that can be completed in a relatively short time, and I simply don't have too much spare time at the moment.
Maybe somebody else will be willing to do it for you?

Dear Gumrai,

Thank you very much for your prompt reply. I have found mq4 file for synergy apb. I have also attached template to have a fill of the system. I found ea which is putting order based on TDI cross. This ea can be used as base ea to modify further.

I have been using this system manually for 6 months now during london session. Now I got the confidence about this system.

You may take your own time to develop this EA. I will continue doing manual trading till the time ea will be ready for use.

Thanks
Manoj

I will look into it if/when I have time. (IF NOBODY ELSE DECLARES AN INTEREST)
As we get nearer to December, I don't find it a good time to be trading and also, with the season here in Thailand, is the best time for growing my organic vegetables. So this time of year I spend a lot more of my time in my smallholding

Yes I understand ! Thank you very much

Hi All Experts,

Can anyone of you please help me code the following system?

Sample INPUT:
PENDING PRE-ORDERS
(BUY ORDER)
LOT SIZE:
SL :
EP :
TP :
DATE & TIME:

(SELL ORDER)
LOT SIZE :
SL :
EP :
TP :
DATE & TIME:

CONDITIONS:
1.Only 1 OPEN position is allowed for BUY(SELL) order,another SELL(BUY) order remain pending.
2.Once that BUY(SELL)OPEN position is CLOSED, EA automatic input the 1 NEW pending order for BUY(SELL) at the pre-defined SL,EP,TP.
3.The conditions 1 and 2 are valid within pre-defined "DATE & TIME" only. After the valid period, both BUY and SELL pending orders will be cancelled immediately.
4. User will self-define LOT SIZE,SL,TP,EP,DATE & TIME parameter value.

EXAMPLE INPUT:
PENDING PRE-ORDERS for EURUSD,M15 only
(BUY ORDER)
LOT SIZE:0.01 lot
SL :1.34000
EP :1.34525
TP :1.35550
DATE & TIME: 2013.11.20 0000 - 2013.11.25 0000

(SELL ORDER)
LOT SIZE :0.01 lot
SL :1.34000
EP :1.33512
TP :1.32850
DATE & TIME: 2013.11.20 0000 - 2013.11.25 0000

In the EA, please make it can flexible to apply in different currency pairs and multi-timeframe,when necessary.

Thanks a lot Gurus!

I am not a coder, but was playing around with ea builder and came up with this ea. I like how it trades but would like to make it able to allow multiple trades on the same currency at the same time. You should be able to specify how many trades will be allowed. Can anyone help ,me with this?