Hi everyone,
I've been away a while, but following on from the Pip Nailer & AshFX Systems I shared here on this forum a few years ago, I am pleased to present my latest development, the Forex Laser Scalper v3.9, for USD/JPY, M1 timeframe, on Metatrader 4.
ENTRY RULES: Simple, enter as soon as you see an arrow appear on your chart. Arrows appear at the close of the candle.
STOP LOSS RULES: Place your stop, 1 pip above/below the recent swing high/swing low. If there is an obvious support or resistance that you can see clearly on the chart, then use that as your stop.
TAKE PROFIT RULES: There's no hard and fast rules for the TP. Frankly everyone has different methods of exiting their profits. Some may close half their trade after a certain amount of pips and then let the profits ride, others may want a fixed TP. I am not going to enforce any one ideology. Rather, I welcome different schools of thought on this thread, whether it be fibs, pivots, support/resistance, moving averages, bollinger bands, etc...
EXCEPTIONS: Do not trade during major news releases.
SUGGESTIONS: It is preferable to use a broker that has a timezone of GMT+2 (outside of DST) and GMT+3 (during DST). Then you don't need to fiddle with the offset. So I'd suggest using a demo account at FXDD, as they are on the correct timezone (then you can place the actual trades on your live broker of course, but I'd suggest demoing with this for a while to get a feel for it). You can download a demo copy of it here:
http://files.metaquotes.net/fxdd/mt4...alta4setup.exe
ALSO: It's better if you restart your MT4 terminal once every 24 hours. This helps ensure your platform doesn't slow down, as the indicator can be fairly intensive.
Once you've attached the indicator to your M1 USD/JPY chart, you can manually scroll back to see the previous few months' trades, to get a feel for what kind of signals the system generates. ADVICE: Please, before attaching the indicator, keep hold of the "Home" button when you open the USD/JPY M1 chart on MT4, until you have reached the maximum amount of candles available on your broker, otherwise you might get some funny arrows here and there. So make sure you attach the indicator AFTER you have loaded all M1 historical data.
NOTE: Some people may have trouble seeing the arrows: If so, please try the following:
1. After you've installed the indicator, take the attached template (TPL file) below, and apply it in Metatrader. To do this, just copy the TPL file into your "\Metatrader_Broker\Templates" folder, restart MT4, open a USD/JPY M1 chart, right-click on the chart, then click on "Template", and then on forex_laser_scalper.
2. Make sure your arrows are THICK LINES, e.g. a thickness of 4. If they are a thickness of 1, then they're barely visible.
3. You'll need to TICK "Allow DLL imports" when attaching the indicator to your chart.
4. Even though the indicator supports suffixes / extensions, such as USDJPYm or USDJPY.x, this might be causing an issue for you. If so, please try a broker where the symbol of your pair is purely USDJPY, i.e. without any extensions.
Because of the accurate nature of the system, then you're not going to get many trades. Generally speaking, there's on average at least 1 signal per day. Whilst that may not seem like a lot, the advantage of this system is that the signals are pretty powerful. Some days you may get multiple signals, other days you might not get any. Patience is key. The indicator supports alerts, so you can ramp up your speakers if you're not sitting at the computer. It also supports email notifications, you'll have to go into MT4 --> Tools --> Options --> Email, to apply the settings (such as your email username/password).
I'll post some trade example later on. Any updates, I will make mention of here, on this opening post. This works on Windows XP, Vista, 7 and 8.
Happy to answer any questions.
PLEASE ALWAYS USE THE LATEST VERSION OF THE FOREX LASER SCALPER. IF YOU HAVE AN OLD VERSION OF THE INDICATOR, PLEASE DISCARD IT AND START USING THE LATEST VERSION. PREVIOUS VERSIONS ARE NOT SUPPORTED. PLEASE DOWNLOAD THE LATEST VERSION OF FOREX LASER SCALPER FROM: http://www.forexlaserscalper.com AS YOUR MT4 ACCOUNT WILL NEED TO BE APPROVED BEFORE YOU CAN USE IT.
--------------------------------
UPDATE : Unfortunately I am no longer able to continue supporting the Laser Scalper, as I'm focusing my time and efforts on the new Forex Candle Predictor which aims to pick tops and bottoms for the next immediate candle, making it the best candlestick predictor currently available for MT4.
I've been away a while, but following on from the Pip Nailer & AshFX Systems I shared here on this forum a few years ago, I am pleased to present my latest development, the Forex Laser Scalper v3.9, for USD/JPY, M1 timeframe, on Metatrader 4.
ENTRY RULES: Simple, enter as soon as you see an arrow appear on your chart. Arrows appear at the close of the candle.
STOP LOSS RULES: Place your stop, 1 pip above/below the recent swing high/swing low. If there is an obvious support or resistance that you can see clearly on the chart, then use that as your stop.
TAKE PROFIT RULES: There's no hard and fast rules for the TP. Frankly everyone has different methods of exiting their profits. Some may close half their trade after a certain amount of pips and then let the profits ride, others may want a fixed TP. I am not going to enforce any one ideology. Rather, I welcome different schools of thought on this thread, whether it be fibs, pivots, support/resistance, moving averages, bollinger bands, etc...
EXCEPTIONS: Do not trade during major news releases.
SUGGESTIONS: It is preferable to use a broker that has a timezone of GMT+2 (outside of DST) and GMT+3 (during DST). Then you don't need to fiddle with the offset. So I'd suggest using a demo account at FXDD, as they are on the correct timezone (then you can place the actual trades on your live broker of course, but I'd suggest demoing with this for a while to get a feel for it). You can download a demo copy of it here:
http://files.metaquotes.net/fxdd/mt4...alta4setup.exe
ALSO: It's better if you restart your MT4 terminal once every 24 hours. This helps ensure your platform doesn't slow down, as the indicator can be fairly intensive.
Once you've attached the indicator to your M1 USD/JPY chart, you can manually scroll back to see the previous few months' trades, to get a feel for what kind of signals the system generates. ADVICE: Please, before attaching the indicator, keep hold of the "Home" button when you open the USD/JPY M1 chart on MT4, until you have reached the maximum amount of candles available on your broker, otherwise you might get some funny arrows here and there. So make sure you attach the indicator AFTER you have loaded all M1 historical data.
NOTE: Some people may have trouble seeing the arrows: If so, please try the following:
1. After you've installed the indicator, take the attached template (TPL file) below, and apply it in Metatrader. To do this, just copy the TPL file into your "\Metatrader_Broker\Templates" folder, restart MT4, open a USD/JPY M1 chart, right-click on the chart, then click on "Template", and then on forex_laser_scalper.
2. Make sure your arrows are THICK LINES, e.g. a thickness of 4. If they are a thickness of 1, then they're barely visible.
3. You'll need to TICK "Allow DLL imports" when attaching the indicator to your chart.
4. Even though the indicator supports suffixes / extensions, such as USDJPYm or USDJPY.x, this might be causing an issue for you. If so, please try a broker where the symbol of your pair is purely USDJPY, i.e. without any extensions.
Because of the accurate nature of the system, then you're not going to get many trades. Generally speaking, there's on average at least 1 signal per day. Whilst that may not seem like a lot, the advantage of this system is that the signals are pretty powerful. Some days you may get multiple signals, other days you might not get any. Patience is key. The indicator supports alerts, so you can ramp up your speakers if you're not sitting at the computer. It also supports email notifications, you'll have to go into MT4 --> Tools --> Options --> Email, to apply the settings (such as your email username/password).
I'll post some trade example later on. Any updates, I will make mention of here, on this opening post. This works on Windows XP, Vista, 7 and 8.
Happy to answer any questions.
PLEASE ALWAYS USE THE LATEST VERSION OF THE FOREX LASER SCALPER. IF YOU HAVE AN OLD VERSION OF THE INDICATOR, PLEASE DISCARD IT AND START USING THE LATEST VERSION. PREVIOUS VERSIONS ARE NOT SUPPORTED. PLEASE DOWNLOAD THE LATEST VERSION OF FOREX LASER SCALPER FROM: http://www.forexlaserscalper.com AS YOUR MT4 ACCOUNT WILL NEED TO BE APPROVED BEFORE YOU CAN USE IT.
--------------------------------
UPDATE : Unfortunately I am no longer able to continue supporting the Laser Scalper, as I'm focusing my time and efforts on the new Forex Candle Predictor which aims to pick tops and bottoms for the next immediate candle, making it the best candlestick predictor currently available for MT4.
