I will code your EAs and Indicators for no charge | Page 149 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #2,961
  • Oct 15, 2013 3:51am Oct 15, 2013 3:51am
Hi folks please where can I get an indy that will enable me open 5 instant orders once by just a click?

Example open 5 orders of EU at 0.01 lots each and closing them in the same format.. At a snap of a click, all should close instantly. Thanks
  • #2,962
  • Oct 15, 2013 9:14pm Oct 15, 2013 9:14pm
Hi Bfis,

I have got attached trend line indicator which is serving my purpose of short term trend.
The only problem with this indicator is that it does not refresh automatically at close of each candle. I have to manually delete trendline from object list and then need to attach the indicator to chart to refresh the trend line. It would be of great help if you can help me to resolve this problem.

Thank you very much for your help in advance.
Manoj
Attached File(s)
File Type: ex4 TLine Alert (1).ex4   4 KB | 461 downloads
Attached File(s)
File Type: mq4 TLine Alert (1).mq4   2 KB | 532 downloads
  • #2,963
  • Oct 15, 2013 9:55pm Oct 15, 2013 9:55pm
Quoting manoj_3986
Hi Bfis, I have got attached trend line indicator which is serving my purpose of short term trend. The only problem with this indicator is that it does not refresh automatically at close of each candle. I have to manually delete trendline from object list and then need to attach the indicator to chart to refresh the trend line. It would be of great help if you can help me to resolve this problem. Thank you very much for your help in advance. Manoj{file}{file}
Seems an odd trendline to me, but as it does what you want, fair enough.
Try this



EDIT: I forgot to change the file name so you may want to rename it before putting it in the indicators folder
Attached File(s)
File Type: mq4 TLine Alert (1).mq4   2 KB | 595 downloads
Please Do Not PM Me With Coding Enquiries
  • #2,964
  • Oct 16, 2013 2:03am Oct 16, 2013 2:03am
Quoting lukka
{quote} simplest solution would be to mark chart as on foreground (pres F8->Common) or just add one line while ObjectSetting, OBJPROP_BACK - which is responsible for background drawing Below I have attached indy for one session, there are many settings to do. You can apply few for chart. Regards {file}
hi friend,

Thank you very much for your help, i already try to change mql for vline session market, work well.
once more thank you very much
  • #2,965
  • Oct 16, 2013 4:31pm Oct 16, 2013 4:31pm
Quoting bfis108137
{quote} This will do that. You must use the ea to place the original order. Using the inputs that begin with "start", it will place an order right away and then will do as you wish with the rest. You can also use the attached script to place the order but make sure the magic numbers are the same in the ea and the script. Also set "useStartOrder" to false otherwise you will have 2 orders. {file} {file}
Hi bfis108137, the closeAfterXAmy EA does seem to work. I opened some trades with the placeOrder script, assigning a unique magic number to each trade. I then attached the closeAfterXAmt EA to each chart, with the corresponding magic number. However, a few of the trades reached the value I wanted the EA to close them at, but nothing happened. My settings for the EA is below. Many thanks.
Attached Image (click to enlarge)
Click to Enlarge Name: closeEA.png Size: 15 KB
  • #2,966
  • Oct 16, 2013 5:48pm Oct 16, 2013 5:48pm
Quoting danjuma
{quote} Hello lukka. Thanks for your reply. However, I do not understand your suggestion/solution. Could you elaborate further please?
I'm Sorry danjuma.
By mistake I have attached Your post, thats why hard to find sens in my answer..


Check this mm ea.
Using it, You will be able to manage orders in many ways (ia. profit/lose/percent_profit/all/current_pairs/order_type etc..)

Regards.
Attached File(s)
File Type: mq4 Awoo Management X2 v3.2.mq4   18 KB | 722 downloads
  • #2,967
  • Oct 16, 2013 6:10pm Oct 16, 2013 6:10pm
Quoting lukka
{quote} I'm Sorry danjuma. By mistake I have attached Your post, thats why hard to find sens in my answer.. Check this mm ea. Using it, You will be able to manage orders in many ways (ia. profit/lose/percent_profit/all/current_pairs/order_type etc..) Regards. {file}
Hi Lukka, thanks for your reply and EA. I have had a quick look at the EA, but I don't think it fulfills what I am after. It does not seem to have the function of opening a new order. I was after an EA that will close an order at a TP and then immediately open another order. Thanks
  • #2,968
  • Oct 16, 2013 11:33pm Oct 16, 2013 11:33pm
Quoting Gumrai
{quote} Seems an odd trendline to me, but as it does what you want, fair enough. Try this EDIT: I forgot to change the file name so you may want to rename it before putting it in the indicators folder {file}
Dear Gumrai,

Thank you very much for your help.

Thanks
Manoj
  • #2,969
  • Edited 3:40am Oct 19, 2013 3:29am | Edited 3:40am
Hi everyone,

I will be grateful if anyone can help with this.

The attached Grid indicator has an HGrid.Lines user option that appears to limit the number of H lines drawn, and this is great because it does not fill the chart up with H lines endlessly. BUT this seems to be done arbitrarily and often, most of the lines are below and not enough above the current price for use.


Can someone please modify it so that HGrid.Lines is the (same) number of lines above and below the current price, so when set to say 4, there will always be 4 lines above and 4 lines below the current price.

Thank you.
Attached File(s)
File Type: mq4 Grid.mq4   6 KB | 506 downloads
  • #2,970
  • Oct 19, 2013 11:23am Oct 19, 2013 11:23am
hello there could some one please add an option in this wonderful ea ''CLOSE ORDER WITH OPPOSITE SIGNAL AND ENTER ORDER'' PLEASE HELP

your help be greatly appreciated
Attached File(s)
File Type: mq4 SWB Grid 4.1 with Adaptive Range (43).mq4   21 KB | 712 downloads
  • #2,971
  • Oct 20, 2013 9:25am Oct 20, 2013 9:25am
Hi gurus, I have been trying to create a script that will open two different pairs at the same time but no success.

1. Ability to place a simultaneous BUY/SELL instant market order of two currencies pair. Example buy EU, sell GU

2. Default lot size of 0.5 lots each (mini lot or 50,000 units) no stop loss/take profit.

Below is the code I could not execute...sorry I am not a programmer...I never did science in my college days.

int start()
{

double ask2 =MarketInfo("EURUSD",MODE_ASK);
double ask3 =MarketInfo("NZDUSD",MODE_ASK);


{
//----
if(MessageBox("Do you really want to BUY 0.5 eurusd and gbpusd at ASK price? ",

//----
int ticket=OrderSend("EURUSD",0,1.0,ask 2,15,0,0,"TripleE",0,0,CLR_NONE);
Sleep(100);

int ticket2=OrderSend("GBPUSD",0,1.0,as k3,15,0,0,"expert comment",0,0,CLR_NONE);

//----
Print("OrderSelect failed error code is",GetLastError());

return(0);
}
}

P.S please use the example of pairs given above. Lastly, you are free to rewrite code please. I will appreciate if you will kindly drop the mq4 file here for future edits especially the pairs. Thanks
  • #2,972
  • Oct 20, 2013 9:33pm Oct 20, 2013 9:33pm
Hi Triple E,

If this is an extract of your code, then the error appears in the variable names:

you define "ask2" but then call "ask 2" ( note the extra space)
and then "ask3" versus "as k3"

If this is not your code then it would be useful to post your mq4 file

Fred
" check out The Traders Outpost "
  • #2,973
  • Oct 20, 2013 10:59pm Oct 20, 2013 10:59pm
Quoting RedLineFred
Hi Triple E, If this is an extract of your code, then the error appears in the variable names: you define "ask2" but then call "ask 2" ( note the extra space) and then "ask3" versus "as k3" If this is not your code then it would be useful to post your mq4 file Fred
Not only that but ask3 is the ask price of "NZDUSD" and you are trying to open a GBPUSD trade with it.

Will not stop it executing, but default size is 0.5 lots, but lotsize in the OrderSend is 1.0
Also both trades are buy orders, much easier to find errors in the code if you use OP_BUY and OP_SELL instead of 0 and 1
Please Do Not PM Me With Coding Enquiries
  • #2,974
  • Oct 21, 2013 6:02am Oct 21, 2013 6:02am
@Fred thanks a bunch for looking at it. I got the code as is on FF and no mq4 file. Someone ask this request 2 years ago and someone responded with that code. I compiled the code and there was errors...please do same and help me fix it. I really need this script for a project am testing. very important bro. I use 5 digits/4 digits brokers. Cheers.

Please enable ECN, STP, 5/4 digits brokers compliance.
  • #2,975
  • Oct 21, 2013 10:10am Oct 21, 2013 10:10am
Is there anyone out there that has some pattern recognition MT4 source?
  • #2,976
  • Oct 21, 2013 10:23am Oct 21, 2013 10:23am
Can anyone make a PAINTBAR version of the indicator attached?
Attached File(s)
File Type: mq4 nonLagDots.mq4   5 KB | 600 downloads
Hudson Metrics
  • #2,977
  • Oct 21, 2013 11:08am Oct 21, 2013 11:08am
anyone has a mq4 source with risk to reward ratio information display on the chart screen?

its good if I can move some symbol as stop loss, and it recalculate the lot size for my next trade on the chart screen as well.
  • #2,978
  • Oct 21, 2013 11:26am Oct 21, 2013 11:26am
Quoting Goiter
anyone has a mq4 source with risk to reward ratio information display on the chart screen? its good if I can move some symbol as stop loss, and it recalculate the lot size for my next trade on the chart screen as well.
er.. I do have 2 versions. the Mq4 one is quite personal as i have many formulas to remove in order to share. If you can wait.
the other one is my personal tool which i wrote for my android phone... so if you have iphone.. then don't bother.
its free, I've shared it over there : https://play.google.com/store/apps/d...pp.riskmanager
  • #2,979
  • Oct 21, 2013 4:38pm Oct 21, 2013 4:38pm
Quoting cronosis
Is there anyone out there that has some pattern recognition MT4 source?
Take a look at this:

http://www.forexfactory.com/showthre...73#post3496273

If you look through the thread you might find others you prefer.
  • #2,980
  • Oct 21, 2013 4:45pm Oct 21, 2013 4:45pm
Hi there,

I have a question for you experts.

Prior to placing an order ea asks for total no. of open orders:
extern int orders = 2;
int total=OrdersTotal();
if(total<orders)

Now I want to attach this ea on more than one currency pair (maybe 3 pair). And the check of open orders shall be made against the open orders per curreny pair and not against the total open orders.
What do I need to change or add?
I'd be also happy to get a link where I read about it. (I tried the mql4 help but I didn't get it)

Thank you in advance.
246 traders viewing now, 1 is registered:
ElVenso