The Club! | Page 391 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Help Me Establish The GbpUsd After Dinner Club 40 replies

Attachments: The Club!
Exit Attachments

The Club!

  • #7,801
  • Sep 12, 2013 4:06pm Sep 12, 2013 4:06pm
Quoting infinitus
{quote} Hi PT, on the MMSMP (lower part of the table) the mean (average VPO) is asigned with a 50% probability for reversal. That is, because price here does not need to show a tendency for reversing. Price can simply run to the other side of the spectrum. When you have a high value sell signal on 15min , 1h and 4h, and the price on daily is within the average VPO, you can bet on a downswing. Would price on daily be below the average VPO, like -2SD, when the smaller TF show high value short signal, the downswing may then only be short lived. So...
Thanks for the great explanation Markus. Much appreciated
I see that it is quite dynamic as it has changed considerably over the last two days.
Hopefully this bitch (the euro) starts rolling over soon so we may all start barbecuing some beef
Those who say it cannot be done should not interrupt those who are doing it
  • #7,802
  • Sep 12, 2013 4:23pm Sep 12, 2013 4:23pm
good evening traedorians,hope you all had a nice day
peace and pis be upon all of you
better be not enough salt than too much salt
  • #7,803
  • Edited Sep 13, 2013 2:10am Sep 12, 2013 4:24pm | Edited Sep 13, 2013 2:10am
A present for the thread-members


Murrey Math Excel table, which is connected to MT4


simply put the mq4 file at a 4h TF chart in MT4


then open the Excel file and connect the data base of the pair with the output file of the mq4 indi. The output file of the indicator is located in your MT4 directory under

...experts/files


the Murrey Math calculations are fully done within Excel


have fun and prosper

the mq4 indi takes the needed quotes from MT4 to Excel


EDIT: changed the MT4 indi with another version, which puts the name of the currencie pair into the name of the output file
Attached File(s)
File Type: zip Infinitus Murrey Math Overview.zip   2.1 MB | 558 downloads
File Type: ex4 DT Data Exporter v01~4032period_symbol.ex4   5 KB | 236 downloads
File Type: mq4 DT Data Exporter v01~4032period_symbol.mq4   2 KB | 303 downloads
  • #7,804
  • Sep 12, 2013 4:31pm Sep 12, 2013 4:31pm
Quoting PipTrapper
{quote} Thanks for the great explanation Markus. Much appreciated I see that it is quite dynamic as it has changed considerably over the last two days. Hopefully this bitch (the euro) starts rolling over soon so we may all start barbecuing some beef

Hi PT,

yes, it is a dynamic system, because it works (both MM and MMSMP) with rolling periods (lookback period). This period is set to 32 periods.


It may worth the try for long term trades, to set the lookback period in both to 64. Have even noticed Murrey Math traders who work with 256. But Murrey advised to not get bigger than 64 periods.


If you use 64 for example in Murrey Math, the signals get fewer and the system so gets more static.


Right now I can not simply switch in MMSMP to another lookback period, since that would require me to do a lot of changes inside of the excel file.
  • #7,805
  • Sep 12, 2013 4:32pm Sep 12, 2013 4:32pm
Quoting bzzz
good evening traedorians,hope you all had a nice day peace and pis be upon all of you




  • #7,806
  • Sep 12, 2013 4:42pm Sep 12, 2013 4:42pm
Reverse fib

tried it out on many waves - seems to have high hit rate


http://www.elliottwave.com/freeupdat...#axzz2eiUsYmz8
  • #7,807
  • Sep 12, 2013 4:43pm Sep 12, 2013 4:43pm
my daily dose of making a better world


http://action.sumofus.org/a/nestle-f...=1&sub=fwd&t=2
  • #7,808
  • Sep 12, 2013 4:45pm Sep 12, 2013 4:45pm
Quoting infinitus
{quote}
Wherever you go, there you are.
  • #7,809
  • Sep 12, 2013 4:46pm Sep 12, 2013 4:46pm
Quoting infinitus
A present for the thread-members Murrey Math Excel table, which is connected to MT4 simply put the mq4 file at a 4h TF chart in MT4 then open the Excel file and connect the data base of the pair with the output file of the mq4 indi. The output file of the indicator is located in your MT4 directory under ...experts/files the Murrey Math calculations are fully done within Excel have fun and prosper the mq4 indi takes the needed quotes from MT4 to Excel {file} {file}
much appreciated but pardon my ignorance how do we do that?
better be not enough salt than too much salt
  • #7,810
  • Sep 12, 2013 4:46pm Sep 12, 2013 4:46pm
Quoting infinitus
my daily dose of making a better world http://action.sumofus.org/a/nestle-f...=1&sub=fwd&t=2

Wherever you go, there you are.
  • #7,811
  • Sep 12, 2013 4:47pm Sep 12, 2013 4:47pm
Quoting infinitus
{quote}
hope that 2 pis are enough
better be not enough salt than too much salt
  • #7,812
  • Sep 12, 2013 4:52pm Sep 12, 2013 4:52pm
Quoting infinitus
my daily dose of making a better world http://action.sumofus.org/a/nestle-f...=1&sub=fwd&t=2
bastards the real pis sucker
better be not enough salt than too much salt
  • #7,813
  • Sep 12, 2013 5:02pm Sep 12, 2013 5:02pm
melt all the troubles away
Inserted Video

hey Mr Milam do know him?one of his great grandfathers was the president of italy
better be not enough salt than too much salt
  • #7,814
  • Sep 12, 2013 5:05pm Sep 12, 2013 5:05pm
Quoting bzzz
{quote} much appreciated but pardon my ignorance how do we do that?

In Excel you click on data, then connections, then add.......

in the following window you choose to search for further elements

in the opening window you go to the MT4/experts/files folder and do connect to the DT_4032HQ file


after that you click under "data" at the "existing connections" buttom, choose the connection, open it, mark "existing working sheet" "=$A$1" and say OK


make sure that this conection is updated once per minute
  • #7,815
  • Sep 12, 2013 5:10pm Sep 12, 2013 5:10pm
Igor Pak has improved his countings, lately.


Therefore I provide the link here:


nice alternative count to our counts right now


http://www.fxservice.com/analytics/w...mber-13th-2013
  • #7,816
  • Sep 12, 2013 5:16pm Sep 12, 2013 5:16pm
Quoting infinitus
{quote} In Excel you click on data, then connections, then add....... in the following window you choose to search for further elements in the opening window you go to the MT4/experts/files folder and do connect to the DT_4032HQ file after that you click under "data" at the "existing connections" buttom, choose the connection, open it, mark "existing working sheet" "=$A$1" and say OK make sure that this conection is updated once per minute
humm it seems that i have problem putting the mq4 file at a 4h TF chart in MT4,it simply doesn't work
better be not enough salt than too much salt
  • #7,817
  • Sep 12, 2013 5:22pm Sep 12, 2013 5:22pm
Hello guys , anybody trading aud/usd right now ?
  • #7,818
  • Sep 12, 2013 5:26pm Sep 12, 2013 5:26pm
Quoting bzzz
{quote} humm it seems that i have problem putting the mq4 file at a 4h TF chart in MT4,it simply doesn't work

what does not work?

Can you see the indicator at the chart? It is only visible by showing a text in the lower left corner "DT Data Generator..."

make sure that under settings of this indicator you marked the "allow import of external imports"


make sure, that under "Extras" and "Options" you marked the "activate DDE server"
  • #7,819
  • Sep 12, 2013 5:27pm Sep 12, 2013 5:27pm
Just read Prechters EW Theorist


he does expect Gold to drop 90% from its 2011 high


that means target around 200
  • #7,820
  • Sep 12, 2013 5:32pm Sep 12, 2013 5:32pm
Quoting Mad Russian
Hello guys , anybody trading aud/usd right now ?
I am thinking audnzd or audcad.
Wherever you go, there you are.
14 traders viewing now