I will code your EAs and Indicators for no charge | Page 53 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #1,041
  • Sep 13, 2012 6:48am Sep 13, 2012 6:48am
I'm after an alert/indicator that could alert me when a reversal occurs. The kind of setup can be found in various threads on FF, however the parameters I'd like are the foloowing:

bearish setup: the last closed bar must have the highest high AND highest OPEN out of the last 8 bars, AND also to have closed bearish.

bullish setup: reverse of above.

I've attached a picture of each. Would be good if the alert could have a sound on/off, popup on/off inputs. Ideally I'd like it to alert me for all open charts - might have to attach it to each one separately.

(Just want the alert indicator for now. A possible extension for later could be an EA. Bearish trade: EA identifies a bearish reversal bar. Enter upon break of the bearish reversal bar by 2 pips. Stop placed at the high of the previous bar. Take profit 2:1. Must execute on the bar following the bearish reversal bar otherwise trade is cancelled - manually looks good on Cable )


edit: the EU bullish example actually would have stopped out, but again just after the alert )
Attached Images
  • #1,042
  • Sep 13, 2012 1:02pm Sep 13, 2012 1:02pm
If anyone wants to update this EA to get it to trade on the EURUSD feel free.

Not sure why it isn't working because there is coding in there for 3 or 5 digit signals.

This EA is from 2010.

{
SignalIndex = 1;
}

// this is to deal with factional pips pricing format (just in case)
if (Digits == 3 || Digits == 5)
{
PipFactor = 10;
}
Attached File(s)
File Type: mq4 Peak_Trader_EA_v1.3.mq4   22 KB | 1,113 downloads
  • #1,043
  • Edited 3:22pm Sep 13, 2012 2:47pm | Edited 3:22pm
I found these two indicators and they look great. But I dont know: repainting or not? I hope you can take a look at the code and tell me please.
If they are not repainting (I´m, not talking about the actual bar, I think of repainting the past) then can you please make the following changes to the code:

1. move arrows(dots) of "PriceChannel_Sig..." to the close of the signal bar there my entry would be. ### edit: or make additional arrows there.

((2. make the lwma-line out of 3 colors, blue for higher than last value, red for lower and yellow for eqaul value of the last 2 lwma-values.(or make a paintbar study) ####edit: forget it, I just saw it repainting))

thanks
Attached File(s)
File Type: mq4 absolutely no lag lwma.mq4   2 KB | 784 downloads
File Type: mq4 PriceChannel_Signal_on jurik mtf.mq4   9 KB | 799 downloads
  • #1,044
  • Sep 13, 2012 9:51pm Sep 13, 2012 9:51pm
Could you please add alerts to this? 1 alert popup for each candle pattern, that tells the pattern, pair, time, and only after the bar closes.

Thanks
Attached File(s)
File Type: mq4 James16 Patterns.mq4   9 KB | 844 downloads
  • #1,045
  • Sep 14, 2012 2:12am Sep 14, 2012 2:12am
I use the 21 and 8 EMA's as part of my strategy, but I don't use them in the conventional way. I was wondering if anyone could make it so that the area between the 2 ema's is shaded ? This would just help with a visual, nothing more. It's just for appearance than anything, but that helps me enormously. I'm happen to share the method with anyone if they are interested, it's basic but effective and like any good method, it's a time based thing.
If it's possible to code this (actually, I've seen it done before but I just can't find it anywhere), would it be able to change to whatever Moving Averages i choose and the same with the colour of the shaded area?

Sincerely Tim
Entia Non Multiplicanda
  • #1,046
  • Sep 14, 2012 2:20am Sep 14, 2012 2:20am
If you search on FF for the MA Ribbon, that is what you are looking for.
The dream will never die
  • #1,047
  • Sep 14, 2012 2:31am Sep 14, 2012 2:31am
Quoting Brotyboy
If you search on FF for the MA Ribbon, that is what you are looking for.
Champion, thanks very much
Tim
Entia Non Multiplicanda
  • #1,048
  • Sep 14, 2012 10:05pm Sep 14, 2012 10:05pm
Quoting HarryPlopper
I'm after an alert/indicator that could alert me when a reversal occurs. The kind of setup can be found in various threads on FF, however the parameters I'd like are the foloowing:

bearish setup: the last closed bar must have the highest high AND highest OPEN out of the last 8 bars, AND also to have closed bearish.

bullish setup: reverse of above.

)

any kind takers out there I know coding is very time consuming, hopefully my request isn't too complicated!
  • #1,049
  • Edited 9:02am Sep 15, 2012 7:27am | Edited 9:02am
Quoting HarryPlopper
any kind takers out there I know coding is very time consuming, hopefully my request isn't too complicated!
HarryPlopper-
This should do it you want. If not let me know.
Attached Image (click to enlarge)
Click to Enlarge Name: hiloalert1.PNG Size: 39 KB
Attached File(s)
File Type: mq4 FXPT_HiLoAlert.mq4   4 KB | 1,244 downloads
  • #1,050
  • Sep 15, 2012 8:24am Sep 15, 2012 8:24am
Quoting cyber1
HarryPlopper-
This should do it you want. If not let me know.
Hi Cyber,
Nice Indi! He also wanted bar to close bearish/bullish.
Just needs the >/< to be reversed in this:
if(Close[shift]> Open[shift]
EP
  • #1,051
  • Sep 15, 2012 8:45am Sep 15, 2012 8:45am
Quoting EaglePip
Hi Cyber,
Nice Indi! He also wanted bar to close bearish/bullish.
Just needs the >/< to be reversed in this:
if(Close[shift]> Open[shift]
EP
EaglePip-
Nice catch. I made some last-minute changes to get the arrows correctly oriented and missed that.
  • #1,052
  • Sep 15, 2012 9:06am Sep 15, 2012 9:06am
Quoting jeffx
Could you please add alerts to this? 1 alert popup for each candle pattern, that tells the pattern, pair, time, and only after the bar closes.

Thanks
jeffx-
I have added alerts and e-mail.
Attached File(s)
File Type: mq4 James16 Patterns Alert.mq4   12 KB | 909 downloads
  • #1,053
  • Sep 15, 2012 9:21am Sep 15, 2012 9:21am
Would you, please code a colour histogram indicator for me for the below conditions:

Colour Tale for:

Traders Dynamic Index for (M15) under 32
AND
MTF Traders Dynamic Index for (M5) under 32
AND
MTF Stochastics for (M15) under 20
AND
MTF Stochastics for (M5) under 20

Also, a tale arrow on the Chart

Colour Maroon for:

Traders Dynamic Index for (M15) over 68

AND

MTF Traders Dynamic Index for (M5) over 68

AND

MTF Stochastics for (M15) over 80

AND

MTF Stochastics for (M5) over 80

And also a Maroon arrow on the chart.

Thank in advance.

Erkan
Imparo ancora
  • #1,054
  • Sep 15, 2012 9:33am Sep 15, 2012 9:33am
Quoting kepalalutut
Good day,

Would be much appreciate if somebody can code an alert message to this indi. I just need an alert saying "uptrend' or "downtrend" everytime 'dots' appear. Prior to that, it will be much-much-much better if we can 'switch on/off' that alert.

Thanks in advance.
kepalalutut-
I have added alerts as requested.
Attached File(s)
File Type: mq4 Kaufman_Bands_Alerts.mq4   4 KB | 812 downloads
  • #1,055
  • Sep 15, 2012 12:27pm Sep 15, 2012 12:27pm
Hi , i wondering if you can code and EA with fallowing parameters , please :

1. Short when candle opens below SMA(65) and Stoch(5,3,3) K crosses the level 80 downwards.
2. Close the Short position when K crosses Stoch(5,3,3) level 20 downwards.

3. Long when Candel opens above SMA(65) and Stoch(5,3,3) K crosses the level 20 upwards.

4. Close the Long position when K crosses Stoch(5,3,3) level 80 upwards.

5. Stop loss , Take Profit and Trailing Stop ( as i wish, adjustable).

6. All Time Frames.

Also attachment of the chart is to give you better idea>

Thank you.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: short.jpg Size: 101 KB
Click to Enlarge Name: long.jpg Size: 103 KB
  • #1,056
  • Sep 15, 2012 9:38pm Sep 15, 2012 9:38pm
Quoting cyber1
jeffx-
I have added alerts and e-mail.
Thanks Cyber, appreciate it!
  • #1,057
  • Sep 16, 2012 10:32am Sep 16, 2012 10:32am
Many thanks again Cyber1! and EaglePip for your assistance So far the indicator looks good.
  • #1,058
  • Sep 16, 2012 2:13pm Sep 16, 2012 2:13pm
I am looking for a indicator able to perform the following tasks:
From a list of open charts (say a dozen) and after defining the pairs to go Long and Short, simulate a batch order entry and run a running total of the Profit or Loss in USD on any pre-specified day from the start of the day.
Post the Totals to a spread sheet once a speciefied minimum Profit or Loss is achieved.
For example lets us presume that we have pais A to L (12) open and we want a running total Profit or Loss on 5 pair going Long (say Pairs BCEGK) and 3 Pairs going Short (say ADF) from the start of Sep 10 and we want a record onto a type of spread sheet at every 200$ (Profit or Loss) showing the time and the running total and then plot it on to a independent chart window.
I am not sure if something simmilar is available but if there is would appreciate if I could be informed where I can get it.
  • #1,059
  • Sep 16, 2012 2:55pm Sep 16, 2012 2:55pm
Hello,

I have briefly searched through the forum, but couldn't find anything. I am looking for an EA that will handle many orders simultaneously regarding their stop loss. Most importantly move stops to BE+1 after predefined amount of pips. It has to handle multiple orders for stacking up money management. And it has to be done on one chart and one chart only.

For example: I am opening one position and walk away from the platform. The price moves away, lets say, 30 pips and the EA handles the order moving its SL to BE+1. The price keeps on moving further in my favour, I am back to the platform and stacking up by opening another position. I walk away and the EA moves SL to BE+1 only for that new position without affecting the previous order. The process continues as many times as needed. That's it. No additional functions needed, the only input would be the amount of pips the price needs to move before moving to BE+1.

Any ideas where I could find an EA like that or anybody willing to code one?

Also, I have tried many scripts/indis/EA, whatever, for visual SL/TP management, but none for multiple orders - any ideas? Especially if there was a tool complementary with an EA described above?

Many thanks.

JK
  • #1,060
  • Sep 16, 2012 4:27pm Sep 16, 2012 4:27pm
Quoting Jkdt
Hello,

I have briefly searched through the forum, but couldn't find anything. I am looking for an EA that will handle many orders simultaneously regarding their stop loss. Most importantly move stops to BE+1 after predefined amount of pips. It has to handle multiple orders for stacking up money management. And it has to be done on one chart and one chart only.

For example: I am opening one position and walk away from the platform. The price moves away, lets say, 30 pips and the EA handles the order moving its SL to BE+1. The price keeps on moving...
If you do a search on the term "Pyramid+EA" or "TradeUp+Trailing" you will likely find several EA's that work on this trading method. Hope this helps.
254 traders viewing now, 5 are registered:
PatienceFx
,
mmurat
,
,
BestTraderEv
,
Dave9