I will code your EAs and Indicators for no charge | Page 23 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #441
  • Sep 10, 2011 9:54pm Sep 10, 2011 9:54pm
Quoting kk3
Hi the other indicator alert you did for me is working great!!...Thanks again!

I have another indicator (attached) 123 pattern ..when you put this indictor in the chart it will draw horisontal lines ,,with numbers on the lines such at 23,38,50 and so on ....I wanted to see If you could please make allert when prices breakes the 0 (zero) and 100 line....when price breaks above/below 100 line for when price breakes above/below 0(zero) line.

let me know if you have any questions please.
Kian
Thanks again!
Hi Kian,

here's your modded version. New Settings used:

Alerts
True = Alerts On
False = Alerts Off

Email
True = Email on
False = Email off

MailSubject
Refers to the Email subject header

Added detecting of price levels of fibo lines. Here is how the calculation works:

Your request is actually 4 different alert types to track the cross over of 0 and 100 fibo lines instead of the conventional 2.

Alert 1 for Fibo 0 Line:
When the Ask price is higher than the Fibo 0 Line, AND the previous candle's close is lower than the Fibo 0 line.

Alert Ask cross above Fibo 0.

Alert 2 for Fibo 0 Line
When the Ask price is lower than the Fibo 0 Line, AND the previous candle's close is higher than the Fibo 0 line.

Alert Ask cross below Fibo 0.

Alert 3 for Fibo 100 Line
When the Bid price is higher than the Fibo 100 Line, AND the previous candle's close is lower than the Fibo 100 line.

Alert Bid cross above Fibo 100.

Alert 4 for Fibo 100 Line
When the Bid price is lower than the Fibo 100 Line, AND the previous candle's close is higher than the Fibo 100 line.

Alert Bid cross below Fibo 100.

-----------------------------------
See if this calculation is correct for you. I didn't get a chance to test it yet. Let me know if it doesn't work correctly.
Attached File(s)
File Type: mq4 1-2-3 Pattern MTF v3.1a.mq4   26 KB | 1,277 downloads
  • #442
  • Sep 10, 2011 10:15pm Sep 10, 2011 10:15pm
Hi Guys,

I've been searching for weeks to find a multi timeframe multi currency panel for the MACD with no joy whatsoever. Can someone please help me ?

I've attached both indicator's which I have had no joy in changing myself.

I'm trying to combine Cja's Macd Candles into a panel with colored bars rather than M1 M5 etc. As shown on pic.

I think it maybe very useful to anyone who trades with the MACD and Multicurrencies.

Cheers

Attached Image (click to enlarge)
Click to Enlarge Name: MACD Trend Scanner 2.JPG Size: 83 KB
Attached File(s)
File Type: mq4 TrendScanner.mq4   11 KB | 1,457 downloads
File Type: ex4 TrendScanner.ex4   17 KB | 1,134 downloads
File Type: ex4 MACD Candles v3.ex4   15 KB | 1,160 downloads
  • #443
  • Sep 11, 2011 6:16am Sep 11, 2011 6:16am
Quoting dragosd1
you can also take a look here, it's the same principle, but a much elaborate ea... http://www.forexfactory.com/showthread.php?t=292421.
Have already added tp and sl to dutch, but at ecn support tigpips was faster
but, my 2c, don't waste time with that, it blowns your account in a smooth equity curve....

thanks a lot you too, you guys are so helpful...really appreicate.
Regards

zaib
  • #444
  • Sep 11, 2011 8:56am Sep 11, 2011 8:56am
Quoting tigpips
Hi Kian,

here's your modded version. New Settings used:

Alerts
True = Alerts On
False = Alerts Off

Email
True = Email on
False = Email off

MailSubject
Refers to the Email subject header

Added detecting of price levels of fibo lines. Here is how the calculation works:

Your request is actually 4 different alert types to track the cross over of 0 and 100 fibo lines instead of the conventional 2.

Alert 1 for Fibo 0 Line:
When the Ask price is higher than the Fibo 0 Line, AND the previous candle's close is lower...

Tigpips,

Woow...you are quick and good god bless!

I will test and let you know.

Kian
Thanks!!
  • #445
  • Edited 5:42pm Sep 11, 2011 5:38pm | Edited 5:42pm
Hi tigpips -- Thanks once again for the indicator. I've had a chance to have a look at it now,there seems to be a problem with the placing and non placing of some of the " diff. percentage " figures. In the attached screen shot you can see yellow ticks as to where there should be a diff figure placed,some are recorded correctly and some are absent and I have placed a yellow x for those that are incorrectly placed ( in other words when a newer higher high or lower low is formed on a price excursion beyond the mav then older lower lows or higher highs on that price excursion that side of the mav should be deleted.In essence each time the price makes a new excursion through the mav and closes on the new side then the recording of the diff figure should begin and a footprint is only printed when a new higher high or lower low is formed,so when the price moves back to the other side of the mav and closes then all that should be displayed on the previous excursion to the other side is the one and only highest high or lowest low diff figure.So breach up and through mav and a close then only the highest high should leave a footprint, a breach down through the mav and a close then only the lowest low recorded that side should be recorded and so on.Sorry I hope that is clear enough now. The last 20 - 30 bars on the chart are a bit difficult to judge wether a footprint should be left without a great deal of study so I have left those. Visually there should be enough crosses and ticks to be able to help you. The rest of the indi. is superb and many thanks once again.
Attached Image (click to enlarge)
Click to Enlarge Name: 5minswings3.gif Size: 48 KB
  • #446
  • Sep 11, 2011 9:41pm Sep 11, 2011 9:41pm
Hi,
I hope the EA attached. This sets a box from 6 am to 8 am central time. At that time I want a Buy/Sell Stop orders. When it breaksout, I want the program to set a 15 pip win. When it hits the profit, I want no more trades for the day. If it hits my Stop Loss, I want it to close the losing trade. It would then trade the oppposite trade. I want the Stop loss to be 15 pips and to set profit at 15.
Ron
Attached File(s)
File Type: mq4 NewYorkBox.mq4   18 KB | 966 downloads
File Type: ex4 NewYorkBox.ex4   22 KB | 814 downloads
  • #447
  • Sep 12, 2011 4:56am Sep 12, 2011 4:56am
Hi :

I am running some EAs recently,it is hard to manage them at the same time,so I am looking for some kind of "trade alert EA" like this:

1.It can manage all trade,no matter magic number or some other things.
2.When any trade opened, closed,modified,changed,It can show the alert message in the MT4 platform and ring the bell from the computer's sound card,so I can know about it.
3.It should not conflict with the current running EAs.

Thank you very much in advance!!!Hope someone can help me.
  • #448
  • Sep 12, 2011 9:00am Sep 12, 2011 9:00am
Quoting tigpips
Hi Kian,

here's your modded version. New Settings used:

Alerts
True = Alerts On
False = Alerts Off

Email
True = Email on
False = Email off

MailSubject
Refers to the Email subject header

Added detecting of price levels of fibo lines. Here is how the calculation works:

Your request is actually 4 different alert types to track the cross over of 0 and 100 fibo lines instead of the conventional 2.

Alert 1 for Fibo 0 Line:
When the Ask price is higher than the Fibo 0 Line, AND the previous candle's close is lower...
Morning tigpips,

The alert is not woking correclty the only time I get a alert is when I am switching between time frames..its does not make alert when prices break below/above 0,100 lines.

Thanks,
Kian
  • #449
  • Sep 12, 2011 6:34pm Sep 12, 2011 6:34pm
HI Traders, I am making a system based on Elliot wave, i am basing my count on fractals. If a opposite fractal is broken then that starts a new wave, the wave will only come to an end if the opposite fractal to then new wave is then broken. That may be a rubbish explanation but please see the chart to clarify.

I have included the original ZigZag indicator if that helps..

I would be very grateful to anyone who can modify this.

Many Thanks
B.
Attached Image (click to enlarge)
Click to Enlarge Name: Elliot wave Zigzag example.jpg Size: 217 KB
Attached File(s)
File Type: mq4 ZigZag.mq4   6 KB | 872 downloads
  • #450
  • Sep 12, 2011 8:16pm Sep 12, 2011 8:16pm
Quoting kk3
Morning tigpips,

The alert is not woking correclty the only time I get a alert is when I am switching between time frames..its does not make alert when prices break below/above 0,100 lines.

Thanks,
Kian
Hi Kian,

your newer version. It will only signal you once per bar.

Meaning if it crosses above or below Fibo 0 or 100, it will only signal once for that bar, which ever cross comes first.

This version uses Bid prices only. No Ask prices are used.

New Calculation Logic:
When Bid > Fibo 0 and previous closing candle is below Fibo 0 price -> Alert Fibo 0 Cross Up
When Bid < Fibo 0 and previous closing candle is above Fibo 0 price -> Alert Fibo 0 Cross Down

When Bid > Fibo 100 and previous closing candle is below Fibo 100 price -> Alert Fibo 100 Cross Up
When Bid < Fibo 100 and previous closing candle is above Fibo 100 price -> Alert Fibo 100 Cross Down
Attached File(s)
File Type: mq4 1-2-3 Pattern MTF v3.1b.mq4   27 KB | 1,243 downloads
  • #451
  • Sep 13, 2011 12:44am Sep 13, 2011 12:44am
Quoting klw
Hi tigpips -- Thanks once again for the indicator. I've had a chance to have a look at it now,there seems to be a problem with the placing and non placing of some of the " diff. percentage " figures. In the attached screen shot you can see yellow ticks as to where there should be a diff figure placed,some are recorded correctly and some are absent and I have placed a yellow x for those that are incorrectly placed ( in other words when a newer higher high or lower low is formed on a price excursion beyond the mav then older lower lows or higher...
Ok, I have made the amendments to the trailing display function and the diff price display according to the calculations that we have discussed earlier. Hope this is what you want lol .

I have added 2 more settings, both of which are used to control the display of the various objects:

Top_PipRaise
This value is in pip value. This will control an additional offset by pip value for the labels that above the 20MAV. Reason being is that the labels on MT4 are always displayed below the priceline. This pip value also adds on to the value of "DisplayDistance" for the final display calculation

DisplayDistance's default value is 3.
Top_Pip_raise's default value is 3.

Hence the end result for the pip value offset would be DisplayDistance + Top_Pip_raise = 6 pips.

Higher value for this will result in the label being displayed at a higher position.

Front_Label_Forward_Offset
This value is in seconds. This will control whether the Aqua-coloured diff price is offset more towards the left or more towards the right. When you change to different timeframes. You probably will have to change this value.

86400 secs = 1 day's bar worth.
For M5 I usually put it to about 3000-4000secs
M15 probably about 7000-8000secs.

The higher the timeframe, the more it gets.

The calculation for diff prices only extends to H4 atm.
Attached Image (click to enlarge)
Click to Enlarge Name: Previous Day Close Diff v1.2.jpg Size: 71 KB
Attached File(s)
File Type: mq4 Previous Day Close Diff v1.2.mq4   14 KB | 1,051 downloads
  • #452
  • Sep 13, 2011 2:30am Sep 13, 2011 2:30am
Quoting tigpips
Ok, I have made the amendments to the trailing display function and the diff price display according to the calculations that we have discussed earlier. Hope this is what you want lol .

I have added 2 more settings, both of which are used to control the display of the various objects:

Top_PipRaise
This value is in pip value. This will control an additional offset by pip value for the labels that above the 20MAV. Reason being is that the labels on MT4 are always displayed below the priceline. This pip value also adds on to the value of...
Your kindness and speed amazes me tigpips,will have a play now.

Many many thanks,
  • #453
  • Sep 13, 2011 5:07am Sep 13, 2011 5:07am
I need a simple indicator built.

I would like a signal to be painted when the following conditions are met.

Buy

 

  1. Price has set a new high, as defined by price breaking through a previous high semaphore. We can assume that Heiken Ashi is green here.
  2. Price has rallied back towards that semaphore, defined by Heiken Ashi turning red.
  3. Heiken Ashi then turns green once again.
  4. A signal should now paint.

Sell

 

  1. Price has set a new low, as defined by price breaking through a previous low semaphore. We can assume that Heiken Ashi is red here.
  2. Price has rallied back towards that semaphore, defined by Heiken Ashi turning green.
  3. Heiken Ashi then turns red once again.
  4. A signal should now paint.

If we could, instead of using arrows, just have a red dot paint above a signal candle and a green dot paint below a signal candle. An illustrated example is below for a short signal.

Price first sets a low semaphore. Price then breaks that low. Price then rallies back towards that break, Heiken Ashi turning white. Heiken Ashi then turns red, representing a continuation. On the first vertical line a signal should paint. Also, the second vertical line at 18:00 is a valid signal to the short side as well.

Just so you know, the SL should be placed behind the high of the Heiken Ashi rally, your TP should be a certain multiple of that away, and it would be wise to move to BE when price approaches and stalls at the low made before the rally back towards the break. Only trade during volatile sessions (think Frankfurt).

Attached Image (click to enlarge)
Click to Enlarge Name: euhasem.gif Size: 14 KB
Found a way to detect where the market will turn.
  • #454
  • Sep 13, 2011 5:19am Sep 13, 2011 5:19am
Ah, the indicators.

Heiken Ashi is already on your platform. The other indicator can be found below, however, most now have it and it is all over this forum as well.

http://bit.ly/179jaD

It should be said though that this entire thing might could be done just with Heiken Ashi, as I'm sure the semaphore indicator is a pain to code.

Also, there is no reason the indicator produced here should repaint, although the semaphore indicator is a repainting indicator. By the time all conditions are met, all semaphores will have been in place.
Found a way to detect where the market will turn.
  • #455
  • Sep 13, 2011 5:45am Sep 13, 2011 5:45am
Quoting Metatrader
Hey Guys,

i want to learn and improve my MQL4 skills. I think the best way to do this is to practice. Unfortunately sometimes I don`t have any nice idea which i can implement in a Expert Advisor / Indicator. So if any of you is interested, please post in this forum your ideas and i will try to implement it into mql4.

Andi

Hi, your posting is from 2009, do you still code an EA for free :-) ?
I have some good ideas that I'm actively using in my trading...
  • #456
  • Sep 13, 2011 12:27pm Sep 13, 2011 12:27pm
If you are able to re-code the following DSS Bressert ino mq4 for metatrader I'd be delighted. Here it is and the link - http://share.esignal.com/download.js...S_Bressert.efs

/*********************************
Provided By:
eSignal (Copyright c eSignal), a division of Interactive Data
Corporation. 2009. All rights reserved. This sample eSignal
Formula Script (EFS) is for educational purposes only and may be
modified and saved under a new file name. eSignal is not responsible
for the functionality once modified. eSignal reserves the right
to modify and overwrite this EFS file with each new release.

Description:
DSS Bressert (Double Smoothed Stochastic)

Version: 1.0 04/10/2009

Formula Parameters: Default:
pds 10
TriggerLen 5
Overbought 80
Oversold 20
EMAlen 9

Notes:
Double Smoothed Stochastics (DSS) is designed by William Blaw.
It attempts to combine moving average methods with oscillator principles.
**********************************/
var fpArray = new Array();
var bInit = false;

function preMain() {
setStudyTitle("DSS Bressert");
setCursorLabelName("DSS", 0);
setCursorLabelName("Trigger", 1);
setDefaultBarFgColor(Color.brown, 0);
setDefaultBarFgColor(Color.red, 1);
setStudyMax(101);
setStudyMin(-1);
var x = 0;
fpArray[x] = new FunctionParameter("pds", FunctionParameter.NUMBER);
with(fpArray[x++]) {
setLowerLimit(1);
setDefault(10);
}
fpArray[x] = new FunctionParameter("TriggerLen", FunctionParameter.NUMBER);
with(fpArray[x++]) {
setLowerLimit(1);
setDefault(5);
}
fpArray[x] = new FunctionParameter("Overbought", FunctionParameter.NUMBER);
with(fpArray[x++]) {
setLowerLimit(1);
setDefault(80);
}
fpArray[x] = new FunctionParameter("Oversold", FunctionParameter.NUMBER);
with(fpArray[x++]) {
setLowerLimit(1);
setDefault(20);
}
fpArray[x] = new FunctionParameter("EMAlen", FunctionParameter.NUMBER);
with(fpArray[x++]) {
setLowerLimit(1);
setDefault(9);
}
}

var xDSS = null;
var xTrigger = null;

function main(pds, TriggerLen, EMAlen, Overbought, Oversold){
var nBarState = getBarState();
if (nBarState == BARSTATE_ALLBARS) {
if (pds == null) pds = 10;
if (TriggerLen == null) TriggerLen = 5;
if (Overbought == null) Overbought = 80;
if (Oversold == null) Oversold = 20;
if (EMAlen == null) EMAlen = 9;
}
if (bInit == false) {
addBand(Overbought, PS_SOLID, 1, Color.blue, 0);
addBand(Oversold, PS_SOLID, 1, Color.blue, 1);
xDSS = ema(EMAlen,stochK(pds,1,1,ema(EMAlen, stochK(pds,1,1))));
xTrigger = ema(TriggerLen,xDSS);
bInit = true;
}
var nDSS = xDSS.getValue(0);
var nTrigger = xTrigger.getValue(0);
if(nDSS==null||nTrigger==null) return;
return new Array(nDSS,nTrigger);
}
  • #457
  • Sep 14, 2011 4:13am Sep 14, 2011 4:13am
Quoting SteveG
Hi Guys,

I've been searching for weeks to find a multi timeframe multi currency panel for the MACD with no joy whatsoever. Can someone please help me ?

I've attached both indicator's which I have had no joy in changing myself.

I'm trying to combine Cja's Macd Candles into a panel with colored bars rather than M1 M5 etc. As shown on pic.

I think it maybe very useful to anyone who trades with the MACD and Multicurrencies.

Cheers

Attachment
Do you have the mq4 source file for MACD Candles v3.ex4?
  • #458
  • Sep 14, 2011 4:48am Sep 14, 2011 4:48am
Hey guys,

I know how to get the close of a bar with the iClose command, but is there a way to get the close of the Heiken Ashi candles that MT4 has in the indicator list?

Any help would be appreciated.
Thanks
  • #459
  • Sep 14, 2011 7:36am Sep 14, 2011 7:36am
Quoting sdotmurray
Hey guys,

I know how to get the close of a bar with the iClose command, but is there a way to get the close of the Heiken Ashi candles that MT4 has in the indicator list?

Any help would be appreciated.
Thanks
This will get the close of the current heiken ashi candle:
Inserted Code
   double HeikenAshi_close;
   HeikenAshi_close = iCustom(Symbol(),0,"Heiken Ashi",3,0);

This will get the close of the previous heiken ashi candle:
Inserted Code
   double HeikenAshi_prev_close;
   HeikenAshi_prev_close = iCustom(Symbol(),0,"Heiken Ashi",3,1);
  • #460
  • Sep 14, 2011 12:11pm Sep 14, 2011 12:11pm
Hello
I'm in the search of an indi that shows the difference of 2 MAs (fully costumizable) in main chart or simply a MA with its value on chart, I had one but I don't know how now is lost and can't find it on any forum.
Any help would br apreciated
best regards
201 traders viewing now, 5 are registered:
mmurat
,
,
Betka
,
aspiring91
,