MJ - My Indicators | Page 8 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Create MT5 indicators from MT4 indicators 4 replies

TOP 100 best indicators: post good indicators here 647 replies

Custom Indicators vs. Technical Indicators 6 replies

Lagging Indicators -vs- Leading Indicators 48 replies

Indicators, where more info 3 replies

Attachments: MJ - My Indicators
Exit Attachments

MJ - My Indicators

  • #141
  • Sep 3, 2011 2:28am Sep 3, 2011 2:28am
Yesterday night I did some NEW inid too:

A MTF MA Order Alerter:

Pic below: 1. chart Chart version, 2. chart the new MTF MA Order Alerter (used a MTF M5 interval)
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot.png Size: 39 KB
__Thanks__ MJ
  • #142
  • Sep 3, 2011 2:49am Sep 3, 2011 2:49am
NEW indi MTF MA Touch Price version:

second chart is the MTF version (it's really kind of mixture as the MA touch Price bar is using on purpose the Chart bars and not the MTF bars: only the SMA/SMA are MTF
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot-1.png Size: 26 KB
__Thanks__ MJ
  • #143
  • Sep 3, 2011 3:43am Sep 3, 2011 3:43am
hi pmullin86,

this might be of some interest to you to.

I had planned it some time but did it this morning:

ALopSTOkOrder inid. This is similar to what we did with MA order

NOTE: this does NOT check the direction at all:

the definition is a bit different because with STO we get more often equal values: e.g. often 3 or 4 STO will have the same value.


I copy here from my help file the info:

* ALERT OPTION: This compares all STOk positions to each other. It does not check the Direction.
* - UP: ALL STOk stuck in order. STOk1 Higher/or Equal STOk2 etc..
* - DOWN: ALL STOk stuck in order. STOk1 Lower/or Equal STOk2 etc..
*
* - ALL EQUAL EXCEPTION: to handle the seldom case where all STOk have the same value (meaning with the above rule they would be valid for both UP and DOWN Order Alert) there is this exception.
* - e.g. all STOk at 45 EQUAL (will not usually happen very often) but what might happen more often is that all STOk are at 100 or 0. Such cases are considered of being not in order.



I did a pic in comparison with the STO Direction Up/DN alert

I'm planing to do a version for the whole rope which only does the alert (MT4 can only plot 8 buffers)

Or one could use 2 subwindows which 8 STO order: 1 for the low and one for the high (disregarding Spud's additional 23,24 KPeriod)
Attached Image (click to enlarge)
Click to Enlarge Name: 1.gif Size: 29 KB
__Thanks__ MJ
  • #144
  • Sep 3, 2011 3:58am Sep 3, 2011 3:58am
Just some thought to the STOkOrder ind: maybe this could give some early warnings in combination with the STOkSirection UP/Down:

What I mean if one is ALERT: UP and the other is Alert DOW:

Not sure but maybe something like that one could check true a bit.

in the pic I just used a random part no time to check this out now.

Is just a thought
Attached Image (click to enlarge)
Click to Enlarge Name: 2.gif Size: 25 KB
__Thanks__ MJ
  • #145
  • Sep 3, 2011 5:09am Sep 3, 2011 5:09am
Uploaded all the updated and new indi: 129: many overlapping a lot.

Note: the indi are not yet tested: some might even not load.

The docu is at times wrong: but most of the time should be helpful.

I saw some of the new indi where is is really wrong but have no time now to go through it all.

Any way:
For people especially interested in MTF trading there might be some interesting stuff for one or the other.

HAPPY TRADING

MJ
__Thanks__ MJ
  • #146
  • Sep 3, 2011 6:43am Sep 3, 2011 6:43am
This sounds good but will it only be using two stochs or how many will you add...i can think already of quite a few uses for something like that...
Quoting M_j
hi pmullin86,

this might be of some interest to you to.

I had planned it some time but did it this morning:

ALopSTOkOrder inid. This is similar to what we did with MA order

NOTE: this does NOT check the direction at all:

the definition is a bit different because with STO we get more often equal values: e.g. often 3 or 4 STO will have the same value.


I copy here from my help file the info:

* ALERT OPTION: This compares all STOk positions to each other. It does not check the Direction.
*...
No man is free who is not a master of himself. -P.M.-
  • #147
  • Sep 3, 2011 7:28am Sep 3, 2011 7:28am
Quoting pmullin86
This sounds good but will it only be using two stochs or how many will you add...i can think already of quite a few uses for something like that...
As you can see on the pic it uses 8 STOk

but as with most of my indi I will do versions which make sense: for order we need at least two:

So indi with 2 up to 8.

And than probably a couple of only Alerts for the rope with 18 or so will see: in the new uploaded package I think I have added only the 1 with 8 like from the pic.

I guess I will eventually also do some MTF versions: Spud used such position order for some stuff.

BTW: I was searching for something and came across this thread: http://www.forexfactory.com/showthread.php?p=67885

might be of interest to you (in the near future so maybe save it) I did not check it out but had to think about our PM a couple of days ago.
__Thanks__ MJ
  • #148
  • Sep 3, 2011 7:34am Sep 3, 2011 7:34am
Thanks much and can you say on here the difference between chart version and mtf version....
Quoting M_j
As you can see on the pic it uses 8 STOk

but as with most of my indi I will do versions which make sense: for order we need at least two:

So indi with 2 up to 8.

And than probably a couple of only Alerts for the rope with 18 or so will see: in the new uploaded package I think I have added only the 1 with 8 like from the pic.

I guess I will eventually also do some MTF versions: Spud used such position order for some stuff.

BTW: I was searching for something and came across this thread: http://www.forexfactory.com/showthread.php?p=67885

might...
No man is free who is not a master of himself. -P.M.-
  • #149
  • Sep 3, 2011 7:44am Sep 3, 2011 7:44am
Quoting pmullin86
Thanks much and can you say on here the difference between chart version and mtf version....
For many inidicators my basic idea is to have of 3 versions:

1. CHART Version e.g. 8 STOk lines Order Check

2. MTFSame Version: a MTF version were all individual 8 STOk use the same MTF interval: e.g. H1

(this is a bit less coding, is a bit faster and also most of the time nicer to configure than the 3 version).

3. MTF Version: a MTF version were each of the individual 8 STOk can use their own MTF interval: e.g. STO1 = M5, STO2=M15, STO3=M30 etc..etc..
__Thanks__ MJ
  • #150
  • Sep 3, 2011 7:48am Sep 3, 2011 7:48am
So why is chart version and mtf, version so different looking on a chart...if representing the same moving average or stoch...
Quoting M_j
For many inidicators my basic idea is to have of 3 versions:

1. CHART Version e.g. 8 STOk lines Order Check

2. MTFSame Version: a MTF version were all individual 8 STOk use the same MTF interval: e.g. H1

(this is a bit less coding, is a bit faster and also most of the time nicer to configure than the 3 version).

3. MTF Version: a MTF version were each of the individual 8 STOk can use their own MTF interval: e.g. STO1 = M5, STO2=M15, STO3=M30 etc..etc..
No man is free who is not a master of himself. -P.M.-
  • #151
  • Sep 3, 2011 7:52am Sep 3, 2011 7:52am
Quoting pmullin86
So why is chart version and mtf, version so different looking on a chart...if representing the same moving average or stoch...
Not sure what you mean: might want to post a pic.

Maybe use STO as it is easier to see in the sub window.
__Thanks__ MJ
  • #152
  • Sep 3, 2011 7:55am Sep 3, 2011 7:55am
Quoting M_j
Yesterday night I did some NEW inid too:

A MTF MA Order Alerter:

Pic below: 1. chart Chart version, 2. chart the new MTF MA Order Alerter (used a MTF M5 interval)
Here we have chart version and mtf versionfor m5 but they appear different why is that
No man is free who is not a master of himself. -P.M.-
  • #153
  • Sep 3, 2011 8:51am Sep 3, 2011 8:51am
Quoting pmullin86
Here we have chart version and mtf versionfor m5 but they appear different why is that
Well, the MA's are a normal Chart and MTF. So each it is clear that the MTF M5 is looking different.

One MTF Bar is plotted as 5 Chart bars.

The pic does not look strange to me: but I'm not saying I have no mistek in my code.


I guess if you want a little bit more feeling for it do once the Comparison test I wrote in the info files of:
opSMA_MTF_0.00.ex4 and opEMA_MTF_0.00.ex4.
__Thanks__ MJ
  • #154
  • Sep 3, 2011 9:11am Sep 3, 2011 9:11am
Quoting M_j
Well, the MA's are a normal Chart and MTF. So each it is clear that the MTF M5 is looking different.

One MTF Bar is plotted as 5 Chart bars.

The pic does not look strange to me: but I'm not saying I have no mistek in my code.


I guess if you want a little bit more feeling for it do once the Comparison test I wrote in the info files of:
opSMA_MTF_0.00.ex4 and opEMA_MTF_0.00.ex4.

Ok my apologies...I misunderstood the post picture and did not realize one was mtf and the other was regular ma's...so I wasn't trying to point out anything wrong with the indicator or code just wanted to know the difference but I realize my mistake now...
No man is free who is not a master of himself. -P.M.-
  • #155
  • Sep 3, 2011 9:16am Sep 3, 2011 9:16am
No problem at all.
__Thanks__ MJ
  • #156
  • Sep 3, 2011 10:57am Sep 3, 2011 10:57am
I'm working on a new indi I wanted to do for a while: a Zizag Fractial Kind Pattern Search indi.

Basically something somewhat similar to my old ZZ

Quoting M_j
old ZZ
I have something in mind but not sure how it really will work out in praxis.

Anyway I follow along this lines:

ZZ RULES:
The next ZZFrac must be basically dZZMinDiffPips (user defined) pips away from the the previous ZZFrac. But it's not so simple.

1.
FRAC can happen UP/DOWN at the same bar: in such case the one further away is considered as the next valid ZZFrac
* - if both are at the same distance from the Previous ZZFrac the one in the opposite direction of the previous ZZFrac considered as the next ZZFrac

2.
FRACKindZZ can also be continuation from the previous:
if the previous was an UP ZZFrac and the current is also an UP FRAC and Higher than the Previous ZZFrac it is considered as a continuation ZZFrac
* - in this situation it must be not the dZZMinDiffPips pips away but only: Higher than the previous UP ZZFrac

DOWN ZZFrac just similar.
__Thanks__ MJ
  • #157
  • Edited 4:00pm Sep 4, 2011 3:49pm | Edited 4:00pm
Previous posts ZZ Rules are not usable for what I had in mind.
__Thanks__ MJ
  • #158
  • Sep 5, 2011 8:55am Sep 5, 2011 8:55am
I did some nice improvements to my DPP (Day Price Projection) indicator:

- changed internally to my new comparison functions with precision and

- added a Possible suggest New Entry direction Icon:
For me this is only an additional source of consideration: I would not enter any trades because of it.
I use it more the opposite way around:
If I want to enter a new trade based on other consideration: I use this more as a warning: when to maybe skip such trade.

I will post a couple of pics so one can see some of the difference thing.


Pic below: base on DPP I would enter a trade UP Or DOWN

Note: this uses: iSkipBarsOfWeekday = -1

So we skip no days data: and you get yesterday's sunday data as the previous day range: Aqua extended lines.

I think MT4 ATR does it similar: personally I don't like it too much in that way. I usually skip the Sunday completely: iSkipBarsOfWeekday = 0
Attached Image (click to enlarge)
Click to Enlarge Name: DPP_main.gif Size: 14 KB
__Thanks__ MJ
  • #159
  • Sep 5, 2011 9:11am Sep 5, 2011 9:11am
Note all the different color have meaning. Can me user adjusted.

Anyway: maybe I go through the text row.

1. EntryDirection: Only UP
reason of current Price outside PercInAreaLine color(Goldenrod)

2. RED DDPip | Actual block: WARNING Color because the days move was more than the initial DDP FULL projection: Black Lines.

If it stays like that it was a nearly 100% projection. Red line extended Day Hi, Blue Line extended Day Low

3. DeepSkyBlue PipsTo DDPHi | Lo block:
color reason because Price outside PercInAreaLine color(Goldenrod)

4. Silver Block: The DDP Full projection price (does not change color)
black lines on the chart.

5. Green Previous days Pips: does not change color either.


NOTE: Compare the colors with the previous posts pic which is default.
Attached Image (click to enlarge)
Click to Enlarge Name: dpp2.gif Size: 17 KB
__Thanks__ MJ
  • #160
  • Sep 5, 2011 9:17am Sep 5, 2011 9:17am
WARNING all the way:

1. NO New Trade Entry direction

2. Red DDPip Actual Block: moved already nearly 10% beyond the projection (which is ion fact not too bad)

3. Red Pips To DPP Full Hi projection BLOCK: negative: means it is currently beyond the black Hi line.
Attached Image (click to enlarge)
Click to Enlarge Name: dpp5.gif Size: 17 KB
__Thanks__ MJ
0 traders viewing now