1000+ MT4 Indicators :)

Hi
I am looking for the Synergy Advanced MTF indicator as seen in the attached picture,does anyone have this please?

Hello,

I'm searching for a very simple indi.

Does anyone know of an MT4 indicator that does this only:

1] ADR for X days (where x is selected by the trader)
2] range today


on a chart you would only see something such as:

ADR = 214 today = 43 (today is obviously dynamic)


i'm having trouble finding one that does only this, cos i dont want 10D, 20D, room up/dn etc which is often the norm

thanks for your help

thanks to the OP for sharing this. Highly appreciated.

Later edit: i dind't notice that i was answering to such an old thread )

anyone??

Try this.

These indicators are posted on a free-of-charge, take-them-or-leave-them, as-is, use-them-at-your-own-risk, basis. Please don't expect me to spend hours modifying them to meet individual requirements. Full source code is provided, if anybody wants to make changes.

Daily Range PeterE has been updated to display ask price; bid price; spread; today's range thus far; X-day average daily range (excluding any Sunday candles).

Signal displays 'traffic lights' for MA, Williams %R and Parabolic SAR (green = bullish, yellow = neutral, red = bearish); bid price (green = uptick, red = downtick); S = spread, and spread as a % of 30 day ave daily range; $ = dollar value per pip (per 1 lot trade), and #pips price is above/below today's open; R = today's range thus far; 30 day average daily range (excluding any Sunday candles); today's range as a % of average daily range; C = broker's carry interest rate for long and short trades, respectively. [Credit where credit's due: the original code was sourced from here (http://valas-edu.blogspot.com/2008_05_14_archive.html).]

Display Info All Pairs displays symbol abbreviation; current bid price; today's range thus far; 30 day average daily range (excluding any Sunday candles); today's range as a % of average daily range; spread; spread as a % of average daily range; dollar value per pip (per 1 lot trade).

Clocks displays MT4 broker time, with minutes and seconds underneath; and clocks for 9 other customizable timezones. Dark gray = 'night' (time between 6pm and 6am); light gray = 'day' (6am to 6pm); bright color = market open (8am to 5pm).

This really helped cut down my search time for some of the elusive indi's I've been looking for!


Leonlorenzo Just like finding a big bag of crack on the floor,


That is putting it lightly... for the beginners and indi envious @ least!


Thank you again!

Thanks for the collection! it gives lots of inspiration...

Thanks for the indicators. Do you have information on how they work?

Hey Guys,

I'm defining the trade on the basis of a two EMAs cross. If the fastest of two EMAs is on the top it is uptrande if it is at the bottom it is downtrade. The same principle applies for all timeframes.

I'm looking for an indicator which would show on current screen which of the EMAs is on the top on diffrent time frames.

All inputs are welcomed ! Thanks !

Does anyone have ADX indicator that calculates and applies only when the price candel is closed?? The momentum one is triggering my other indicator and which in return gives fals signals.

Its called the advanced ADX.

LEGEND (see post #26 for screenshot):

S = spread in pips, and spread as a % of a 30 day ave daily range (or whatever value you supply in the ADRdays parameter). (Note: Saturdays and Sundays are not included in the ADR calculation).

$ = dollars per pip, for each full lot traded. The value alongside is the number of pips that price has moved up (+) or down (-) since midnight (MT4 time)

R = today's range (pips between high and low) thus far, as a fraction and % of a 30 day ave daily range (or whatever value you supply in the ADRdays parameter. (Note: Saturdays and Sundays are not included in the ADR calculation). The numbers inside the square brackets are the smallest and largest daily moves (in pips) during the ADR period.

C = the swap/rollover paid/charged on long and short positions respectively, as stated by the br0ker (i.e. supposedly per full lot).

T = MT4 time when the last tick occurred; time to run before the current candle ends; and how much time has elapsed, %-wise, in the forming of the current candle (100% would mean that the candle is completely formed, and the next candle begins at 0%)


PARAMETERS:

scaleX = horizontal interval at which the squares are created
scaleY = vertical interval
offsetX = horizontal indent of all squares
offsetY = vertical indent
fontSize = font size
corner = adding a parameter for choosing a corner
symbolCodeBuy = symbol code for a buy signal
symbolCodeSell = symbol code for a sell signal
symbolCodeNoSignal = symbol code for a no signal
signalBuyColor = color of the symbol for a buy signal
signalSellColor = color of the symbol for a sell signal
noSignalColor = color of the symbol for no signal
textColor = color of all writings

MA1period = first period used to determine color of MA traffic light (green=bullish, yellow=neutral, red=bearish)
MA2period = second period used to determine color of MA traffic light (green=bullish, yellow=neutral, red=bearish)
WPRperiod = period used for determining color of Williams %R traffic light (green=bullish, yellow=neutral, red=bearish)

ADRdays = number of days used in calculating average daily range for spread% and range% (Saturdays and Sundays not included in the count)

RefreshEveryXMins = determines how frequently the data is refreshed: 0 = every tick; 1,5,15,30, 60,240 means at the start of every M1,M5,M15,M30,H1,H4 candle respectively

UpdateTicker = if TRUE, displays a series of dots interspersed with 'up dots' and 'down dots' representing the most recent upticks and downticks, respectively. Needs Wingdings2 font to be installed, in order to work correctly.


NOTE: the original Signal indy was sourced from here (http://valas-edu.blogspot.com/search?updated-max=2008-05-20T04:29:00%2B07:00&max-results=3). More info at that link.

Thanks a lot Dave
Have a great day,
D.

I got this bollinger bandwidth indicator from here and it works fine. I would like a couple of improvements if possible.

The bar width is stuck. You can change the width but it always reverts back to the original setting when you restart the platform. I would like the option to choose the bar width.

Also I would love the bars to change colour when they change direction compared to the previous bars like the macd coloured indicator does. I would like to be able to choose the colours

Its not a big deal, I can use the indicator as is no problem. I am not a programmer and I hope what I am asking for isn't to much trouble

Hallo hanover, its a great indicator you posted here. Thanks a lot for sharing.
I have a request for few changes if you don't mind. I have attached an indicator from hector which project horizontal lines for specified period of day on chart, by default its Last 14days. It also project another line with 80% of the actual ATR value for taking profit.

Now what i want is to add these 1 feature to the "Daily Range Peter" indicator. Is it possible.

Thanks
Pawan

Sorry, Mac, I only just noticed your post now. Please try the attached.

David

Pawan,

Two problems:

1. I can not see the calculations in hector's indicator unless you post the source (.mq4) file.

2. I don't understand what you are asking. If you want the lines and text values from both hector's and PeterE's indicators to display like they currently do, why not simply attach both indicators to your chart?

David

Thats perfect!
Thankyou so much
Doug

David,

Thanks much for the Signal.mq4 indy which is way superior to the signals_bars I had ! Think the WPR, SAR, MA combo you have adequately and briefly represents both the trending and ranging.

You don't seem to accept PMs anymore, so posting here ...

Question 1:

How can I reverse the order of MTF display in Signal? Right now, in the top right corner (=1) I see MN-W-... M1 from left to right, and I would like to see it reversed, from right to left.

Question 2:

Since you run the MT4 tips and tricks forum, how can I put two indys in the same window. E.g., I would like to combine the stoch and ATR indys found in MT4 default indicators.

Also, is there any mq4/exe out there that can give the user the choice of dispalying a given indy(s) into either a separate window, or in the main chart window?

Question 3:

I have been thinking of your Recent Strength indy vs the StrengthMeter indy (from flotsom.) Your MTF chart display is more rigorous, it seems, but IMHO, flotsom's chart bars are visually appealing too.

So have you considered adding LED bars to your RS indy whereby the user gets to see an MTF/Currency(EUR,USD,GBP,JPY,CHF,CAD,AUD,NZD) matrix showing strength and perhaps a similar matrix showing ROC, with custom specification of periods involved and of Update interval in seconds, much as the recent strength matrix on oanda and actionforex like sites? This LED matrix will actually be more compact and visually appealing than StrengthMeter bars which take up quite some space.

Comment 1:

I have reconsidered my views on currency volatility charting, and now believe that an ATR like indy should suffice for pairs tarding.

The VIX/ IV type std dev based volatility really is for options (which could be leading indicators for the underlying pairs trades); however, implementing such IV calculations is made complex by the fact of OTC options vs ETF based options vs currency futures options. The ETF ICE traded options charting with IV and greeks is available on fxoptions.com site.


Regards,

Athar.
Toronto.