Aboonacci System - for EUR/USD prediction | Page 113 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

EUR/USD Price reverse prediction 5 replies

Testing Future Channel Prediction System 4 replies

Using usd/chf - eur/usd correlation to see moves in EUR/USD 46 replies

Looking for Eur/Usd Usd/chf hedge system 12 replies

EUR/USD : Market Gap & Prediction 2 replies

Attachments: Aboonacci System - for EUR/USD prediction
Exit Attachments

Aboonacci System - for EUR/USD prediction

  • #2,241
  • Oct 20, 2010 7:44am Oct 20, 2010 7:44am
Quoting Jeg
Any of Bobi's group could please post their re-calculating numbers after the Asian session please, so we can have your point of view. Thank you.
Hi Jeg
I am NOT part of Bobi's group but decided to post my calcs here. If you guys don't agree, please let me know because this is the only way to learn and I will appreciate additional comments.

Since the Asian session did not break out of the Closing calculation, I left it as is, but when the market went up and basically went past the Passage Resistance of 1.3736, I added 1 pip and then entered this new value of 1.3737 into the Closing price and re-calculated to get the new Higher Passage Values.

I see the price went up to 1.38718 (just passed the New Monthly High of 1.3863 of the re-calculated values) and is currently lower again.
Regards
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Close Calc.jpg Size: 58 KB
Click to Enlarge Name: Re-calc Passage.jpg Size: 58 KB
  • #2,242
  • Oct 20, 2010 7:55am Oct 20, 2010 7:55am
Quoting 4fingers
Hi Jeg
I am NOT part of Bobi's group but decided to post my calcs here. If you guys don't agree, please let me know because this is the only way to learn and I will appreciate additional comments.

Since the Asian session did not break out of the Closing calculation, I left it as is, but when the market went up and basically went past the Passage Resistance of 1.3736, I added 1 pip and then entered this new value of 1.3737 into the Closing price and re-calculated to get the new Higher Passage Values.

I see the price went up to 1.38718 (just passed...
Thank you for sharing
  • #2,243
  • Oct 20, 2010 8:56am Oct 20, 2010 8:56am
I ask before to share values about the closing of the Asian session, to see if it could break the bottom of the old upper trend, since I found the second target to be 1.3877...it just stop at the exact pip and then continue going up... my closing values where at the closing candle of the Asian session
Attached Image (click to enlarge)
Click to Enlarge Name: 13877.jpg Size: 102 KB
  • #2,244
  • Oct 20, 2010 9:14am Oct 20, 2010 9:14am
Hi Bobi
I think it is time to write down a new set of rules, be also more specific to Template3, Template 4 and Break out template. Rules # 4, 5 and 6 refered to the Breakout template, which we don't have. It would be a good confirmation for the calculator to visualize the numbers on the valid template to see the resistance levels, as an example, 38.2% level is not the same on the PT3 than the PT4 and so on... thank you very much for your help.
  • #2,245
  • Oct 20, 2010 9:39am Oct 20, 2010 9:39am
Another Target to the pip
Attached Image (click to enlarge)
Click to Enlarge Name: 13877a.jpg Size: 23 KB
  • #2,246
  • Oct 20, 2010 9:59am Oct 20, 2010 9:59am
Hi Lee
I know you are using just power template 4, but I use both 3 and 4 to compare resistance levels, at this moment price just touched 38.2% in PT3 but already crossed 23.6% in PT4, should we expect to get 100% of PT4? My understanding is that we just need to cross its 23.6% level to consider it, am I right? thanks for your advice.
  • #2,247
  • Oct 20, 2010 10:10am Oct 20, 2010 10:10am
Quoting Jeg
Another Target to the pip
hi jeg

sorry, may i know how did u get this number,i mean 1.3940?thanks for helping
  • #2,248
  • Oct 20, 2010 10:16am Oct 20, 2010 10:16am
Quoting StarHub
hi jeg

sorry, may i know how did u get this number,i mean 1.3940?thanks for helping
Hi StarHub
It came from the values I posted earlier (#2243 ), here is the image of the calculator from the Interpretation side.
Attached Image (click to enlarge)
Click to Enlarge Name: 13877c.jpg Size: 130 KB
  • #2,249
  • Oct 20, 2010 10:18am Oct 20, 2010 10:18am
Quoting aebab
it is not a wrong value , it is indicating a very bullish signal
hi bobi

this is amaze!how come the value lower than breakout2?a bit blur,could anyone who from bobi's group, mind giving us a idea of having this value?!!!

from starhub
  • #2,250
  • Oct 20, 2010 10:22am Oct 20, 2010 10:22am
Quoting Jeg
Hi StarHub
It came from the values I posted earlier (#2243 ), here is the image of the calculator from the Interpretation side.
hi jeg

thanks for your fast reply...i forgot to see below portion...haha...so sorry for giving number...hope everyone can pip more today!!!
  • #2,251
  • Oct 20, 2010 10:26am Oct 20, 2010 10:26am
Quoting StarHub
hi bobi

good day to you, if diverting number is above than PULLBACK signal level number, then what is going to signal about?!thanks for your patient guidance...

and looking fwd to getting your lastest calculator...!!!!!u are talent!!!
hi jeg

could u mind guiding me question above?!thanks
  • #2,252
  • Oct 20, 2010 10:33am Oct 20, 2010 10:33am
Quoting StarHub
hi jeg

could u mind guiding me question above?!thanks
StarHub, I have no idea about your question, I am just another member here trying to figure out about this system and not to get bored in this thread, sometimes it even looks like that I am talking to myself
  • #2,253
  • Oct 20, 2010 10:52am Oct 20, 2010 10:52am
From what Bobi was saying, the team is working on explanatory notes to accompany the release of the new calculator, so that's why it's been a bit quiet around here.
  • #2,254
  • Oct 20, 2010 10:59am Oct 20, 2010 10:59am
Guys.... the team have the new calculator and are working hard on it.....

it is also very quiet in the group too.

I am sure when one of them gets it moving forwards you will hear from them.

In the meantime, from what I have seen of the new calculator, there are simply new additions to what you already have, so you should be able to continue as is.

Regards

Lee
  • #2,255
  • Oct 20, 2010 11:18am Oct 20, 2010 11:18am
Quoting Jeg
Hi Lee
I know you are using just power template 4, but I use both 3 and 4 to compare resistance levels, at this moment price just touched 38.2% in PT3 but already crossed 23.6% in PT4, should we expect to get 100% of PT4? My understanding is that we just need to cross its 23.6% level to consider it, am I right? thanks for your advice.
Hi Lee, may be you jumped this question if you don't mind clarifying this, thanks a lot.
  • #2,256
  • Oct 20, 2010 11:22am Oct 20, 2010 11:22am
[quote=Jeg;4110579]StarHub, I have no idea about your question, I am just another member here trying to figure out about this system and not to get bored in this thread, sometimes it even looks like that I am talking to myself [/quote


sorry about being bored...the thing is the group is working to make sure every question you may have concerning the rules and the calculator is properly answered.

continue with the calculator you have being using till the new one is released...that would probably come this week.
The World As It Is Can Do With Your Positive Disposition
  • #2,257
  • Oct 20, 2010 11:42am Oct 20, 2010 11:42am
Quoting Jeg
Hi Lee, may be you jumped this question if you don't mind clarifying this, thanks a lot.
Jeg,

I did miss that question, so apologies for that.

Sadly this answer is going to be much like my others.

I don't really use the templates much. I have been using the calculator. That said, when I do use them I do use both.

HOWEVER, if and when I trade them, I do not use all of the rules and tend to work on standard fib rules. Also, I have been using the 82 phase gap template over the 127.

I know Bobi mentioned the 82 first and then reverted to the 127, so I am not suggesting that you change, however you will notice that the phase levels perform far better in the 82 gap version than the 127.

As to whether or not the other rules work.... I honestly couldnt tell you.

This month seems to have been focused more on the calculators than the templates, whereas last month it was the templates. For reason that I won't go into, I beleive (only my view), next month will put the two together for the first time. and because of this, I believe the performance of both will significantly improve......... just my view.

I know people are getting frustrated with this currently and the lack of pace at which information is being released. All I can answer is that the group, when they get the information is releasing it as quick as they can.

However, it should be of no surprise, at least to those that beleive in this and can see promise, Bobi is a VERY busy man. So, just to set the record straight, if people beleive that the group is getting tutoring for X numbers of hours per day.... that is simply not the case.

I am sure that the key people in the group, and you can make your mind up as to who those are, will continue to be very supportive...... but only when they have the information.

In the meantime, I would personaly ensure you are 'familiar' with the rules, BUT to focus on the calculator. This should set you in a good sted for next month, when I think things will change around a little.

Please note, these are my thoughts only and may or may not reflect those of the group, however they certainly did not come from anyone in the group or from Bobi.

Regards

Lee
  • #2,258
  • Oct 20, 2010 12:47pm Oct 20, 2010 12:47pm
Quoting leemonk
Jeg,

I did miss that question, so apologies for that.

Sadly this answer is going to be much like my others.

I don't really use the templates much. I have been using the calculator. That said, when I do use them I do use both.

HOWEVER, if and when I trade them, I do not use all of the rules and tend to work on standard fib rules. Also, I have been using the 82 phase gap template over the 127.....
Thank you for your response, I know I can count on you as far as you can. Regards.
  • #2,259
  • Oct 20, 2010 2:03pm Oct 20, 2010 2:03pm
I hope that`s on a live account
  • #2,260
  • Oct 20, 2010 2:40pm Oct 20, 2010 2:40pm
Good afternoon Aebab,
I did a backtest at September V1 with calculator and note that when the "High Break Out 1" and "Target" are the same then indicate trend.
When the "High Break Out 1" and "Target" different no trend. In October it has failed me until now you know why?

Thanks for sharing
15 traders viewing now