I code your Expert Advisors / Indicators

sorry dappadap1 is the correct skype id

Hi findmanu
Thank you very much for this fantastic service to the FF community. It's traders like yourself that make this the best forex forum on the web.
I have a request for an EA. I normally don't trade lower timeframes, but I am intrigued by targetting different trading sessions, hence this box breakout system. Thanks a million in advance. I've attached a chart I hope will explain what I'm after.

chart: EURUSD M30
This is basically a SET & FORGET type system.
Indicators: 'i-sessions' indicator showing
pink box (4:00-10:30GMT+3)
light blue box (11:00-18:00 GMT+3)
light green box (15:00-20:00 GMT+3)
ENTRY: go long when price breaks PINK BREAKOUT BOX high (NOT at candle close)
go short when price breaks PINK BREAKOUT BOX low (NOT at candle close)
TP : Fibonacci Expansion 161.8 (placed in PINK box only to determine target either up or down depending on break)
(The expansion MUST be pulled down to low/high of box as in picture)
(Fib Expansion should not be default as this is set at 50%)
SL : 2 pips below BREAKOUT BOX (for long trade) 2 pips above BOX (for short trade)
rule1 : both buy and sell orders could be triggered only once per day
rule2 : any untriggered orders MUST be closed at LONDON CLOSE (i.e. 18:00 GMT+3)
rule3 : each opened or running trade is only ever closed once stop or target is hit, not at end of day,etc.

P.S. This is loosely based on an FF thread I visited that was started by mer071898
Can't take any credit for this at all.

i want to be a senior mql coder.what should i do?what do you suggest?what kind of pdfs do you suggest?is there any internet page in order to share mql training??thank you..

Can someone let me know how to do the following,

I want to retrieve the value of a 40sma on the close of the 4-00am (UK time) candle and also the same value at the close of the 6-15am candle

can anyone provide the code for this

thank you

hi findmanu cld u code this pls for mt4

Hello, i've tried to use this EA on demo, but it opens too many trades at a time. It first open a trade at market order then opens several other trades at pending order using the same price and they all enter the market at the same price and time. Can someone help me on how tu use it cautiously

Hello everyone,
I've tried to make this ea that i got from this forum and post above trade and it would'nt. The charts would read status;N/A
Can someone help me figure out what the problem is. I have attached it

hi i have a great strategy that works every time but i need someone to code it for me i was wondering if you can help me.

5M Chart
any currency
this are the rules

Long Entry
1) RED CANDLE CLOSES
2) GREEN CANDLE CLOSES
3) PRICE TOUCHES HIGH OF PREVIOUS GREEN CANDLE - ENTER LONG

Short Entry
1) Green Candle closes
2) Red Candle Closes
3) Red Candle Touches lowest of previous red canlde - Enter SHORT

trust me this strategy works.

I have a strategy i want to code into ea,can any body help?
this the rules
1.load bollinger band of 18 dev.2
2.load moving average of 3 EMA apply to close.
3.load rsi 14
4.ADX
NOW THE RULES
the ea should enter buy when the ema 3 crosses the mid line of the bollinger band up and RSI should be above 50 line and ADX should be above 20 line.
to sell the 3 ema should cross the bollinger band mid line down and RSI is below 50 line and ADX is above 20 line.

Hello Bros & Pros,
Hello Findmanu,
Hello Smikester,

Hope you are doing well.

Attached is the standard sample MACD EA that comes with MT4 platform.

1)- Kindly help me adding the following functions:
- Stop Loss
- Trail Stop Loss
- Trail Profit
- Breakeven activate pips
- Breakeven exit pips
- Partial close activate pips
- Partial close activate %
2)- I am trading EUR/JPY (3digits after comma) And I noted that it is modifying the SL after it is activated (The existing TrailStop feature in it) by every pip move ... can you explain this please, or you may modify the existing TrailStop feature in it. I am not sure what is the right thing to do, as I might be setting the EA values in a wrong way.
3)- Kindly keep the code open for me to keep modifying it through the time.


4)- If you have a ready MACD cross EA (Not histo) with the mentioned function, I'll be very happy to use it.


Thank you very much

Hi, does anyone know if there's an EA for http://www.forexfactory.com/showthread.php?t=134759 (FX-50) or something similar or guide me into turning the template into an EA? I'm ready and willing to learn. Thanks.

Need new MACD Indicators
Parameter base on Slope Direction Line Not EMA
reference
http://www.forexfactory.com/showthre...ighlight=slope

Can you help me??

i need an EA. can help??

Followed from the first page, I'll provide all the information mentioned.
This method is my grail, I'm trading with this in Thailand stock market and it works perfectly

extern bool Buy1Sell0 = A;
extern double Lots = B;
extern double TakeProfit = C;

This EA will open order immediately after enabled
let accuse the price of GBPUSD is now
1.0000
EA will consider first to long or short by look at "extern boll Buy1Sell0"
So if A=1 then long only
an if A=0 then short only

_______________________________________________________

let accuse#1
A=1(long only)

Soon as I drag EA to the chat it will
Long B.lot 1.0000 TakeProfit=C---(order 1)

then open pending all Long at
buy limit 0.9800(1.0000-4C) TakeProfit = C
buy limit 0.9850(1.0000-3C) TakeProfit = C
buy limit 0.9900(1.0000-2C) TakeProfit = C
buy limit 0.9950(1.0000-C) TakeProfit = C
------
buy stop 1.0050(1.0000+C) TakeProfit = C
buy stop 1.0100(1.0000+2C) TakeProfit = C
buy stop 1.0150(1.0000+3C) TakeProfit = C
buy stop 1.0200(1.0000+4c) TakeProfit = C
total of 8 orders
4 below 1.0000
4 over 1.0000
by using C as range between orders

then if the price move to 1.0000+C order 1 will automatically close with C pips profit then platform will trigger the buy stop at 1.0000
EA will open one more long order at 1.0000 with TP of C
EA will open one more long order at 1.000+5C(current price +4C) with TP of C (atleast 4C + or - the current price)

then if the price move to 1.0000-C will automatically trigger buy limit at 1.0000-C

something like this

______________________________________________________________

let accuse#2
A=1(long only)
B=0.1 lot
C=50 pips

Ok now
Soon as I drag EA to the chat it will
Long 0.1lot 1.0000 TP50---(order 1)

then open pending all Long at
buy limit 0.9800 TP 0.9800+50pips = 0.9850
buy limit 0.9850 TP 0.9850+50pips = 0.9900
buy limit 0.9900 TP 0.9900+50pips = 0.9950
buy limit 0.9950 TP 0.9950+50pips = 1.0000
------
buy stop 1.0050 TP 1.0050+50pips = 1.0100
buy stop 1.0100 TP 1.0100+50pips = 1.0150
buy stop 1.0150 TP 1.0150+50pips = 1.0200
buy stop 1.0200 TP 1.0200+50pips = 1.0250
total of 8 orders
4 below 1.0000
4 over 1.0000
by using C as range between orders (50)

then if the price move to 1.0050 order 1 will automatically close with 50 pips profit then platform will trigger the buy stop at 1.0050
EA will open one more long order at 1.0000 with TP of 50
EA will open one more long order at 1.0250 with TP of 50 (atleast 200 + or - the current price)

then if the price move to 0.9950 will automatically trigger buy limit at 0.9950

and then cycle

note that
EA will only open instant order at the first time then the rest is pending order only!
EA will only add an order only when one order has successfully reached TP

thx 4 help, really appreciated

Hi,

I'm looking for a trailing stop that can get smaller when the profit is bigger.

For example, when my trade reach +40 pips, then this trailing stop automatically turn on and set 20 points. After the profit reach 50 pips, the trailing stop change to 15 points. After the profit reach 60 pips, it change to 10 points, and so on. Of course we can set all the parameters on the setting.

Hope this kind of trailing stop already there.

Thanks in advance...

Can anyone make an indicator for 89EMA( exponential MA with period set to 89) intersection with 34EMA applied to close..? I will really appreciate your help in this case. Again thanks in advance.

you shd add in a time factor in ur TS actually

Hi
Presently I have this previous day High-Low indicator. see attached
I need to have a line drawn at :
- 38.2% below the previous day High
- 38.2% above the previous day Low.
see attached picture

Can someone help me with the program to include this feature?

Thanks

soonek

Thanks for all your help.
pls i need this indicator/template to show the current signal that is green line oryellow line on the upper right hand corner of my chart( i mean on every chart) such that i can be looking at the daily chart and see all the current signals of 1min,5min,15mins,30mins etc at the upper right hand side of my current chart.
thanks.

Hi, is it possible to code a sound and visual alert for this indicator?
I have tried umpteen times to do this by copying various code from indies with alerts but have failed miserably, your help would be greatly appreciated!
Also more than one beep or chime would be great, a continuous loop would be great as I sleep like a log. The more settings the better to be honest!!!

Thank you in anticipation!

Dirty.