The Dance

I was aiming for something similar but I had a PO at the 1hr 3'confluence of the 35/50. Sadly price was 10 pips short of this.

Regards

Lee

Hi all,

I am still struggling with the scripts. The only one that seems to work is the 'emergency close all'.

I have included a picture here of the 'buy', the 'sell' and the 'set lot size'.

I use MT4 with 'myfxpro' which is a 5 digit broker.

Can anyone please tell me if they can see anything wrong with the settings?

I have downloaded and test all script attachments and I cant get them to work. I also stuggle with the ones on the simulator. Those open trades but do not close them.

Regards

Lee

*edit*

Quite frustratingly, in testing the 'emergecny close all', it closed my PO for the short on the 1hr 35/50

I advice you to check which value is in ordersize variable. I've modified my scripts, because they also didn't work due to ordersize value of 0.01 (minimum allowed is 0.1). Simply set "UseMoneyMgmt = false", because I don't need it anyways at least in nearest future. I've just checked the formula, you need to set stop loss to 15 (not 150) in SetLotSize and it should work fine.

I had the same problem with simulator, so I searched forums for newer version and found it. If I'm not wrong it is here: http://www.forexfactory.com/showthread.php?t=70742

Anyways, I can send you archive, if you will have any problems.

Another trade on UC. Took on touch because of confluence 10/35/RN. It went as expected, until price suddenly went upwards and hit my SL, anyways, it was BE and I got +3 pips.

Also I have one more trade on EU, which will post later. It's going well currently (60 pips and going down).

Edit: now I see, that i missed 50 touch on H1 (should have taken pips on touch), but probably that's not a good place to take any trades right now, too many wicks up and down.

This one I took as a 10 touch on H1. I've marked it by arrow on second screen. Trailed my SL per rules and got stopped with +36 pips on 10 touch . Probably it was too tight, should have moved it a bit higher as price is moving down now. Was too focused on current trade and missed such obvious signal... but anyways total +50 pips is more than enough for the day. If I will take one more trade today, it should be perfect.

By the way, is it possible to increase "Sum of all attachments" limit? I've already hit it and won't be able to upload any more screenshots later.

I've made some changes, though to be honest, I couldn't tell you what they were.

I am now able to enter trades with 19 pip stop losses and close them with the scripts and I can move the TP's and SL's with the scripts too. However, I can only seem to enter trades at 0.1 lot size and I do not know how to change this.

The BE script does not work for me either

Regards

Lee

Take a look at the screenshots.

First one is global variables window (Tools -> Global Variables or F3). You can check there current ordersize value (which corresponds to current lot size for scripts).

http://img27.imageshack.us/img27/922...0124929.th.gif (http://img27.imageshack.us/i/capture05112010124929.gif/)

Second is metaeditor scripts commented. You can change lot size manually, but you need to turn off money management variable, because if it will be enabled, later formula will override Lots variable.

http://img99.imageshack.us/img99/402...0124813.th.gif (http://img99.imageshack.us/i/capture05112010124813.gif/)

Also you need to execute this script every time you want to make a change, because it is not possible to edit global variables by hand (at least I don't know how). And don't forget, that you need to press Compile button every time you make a change in scripts!.

P.S. I hope that our discussion doesn't violate any rules of this thread

This is the data that allows me to enter trades with the buy and sell, but I cant change anything here to allow me to increase the lot size.

The odd thing is that the buy and sell scripts have values of 190 for a 19 pip SL and 1000 for a 100 TP.

Yet, this lot size script only works with a SL of 15. My only assumption is that the SL in here is not related to a SL on screen.

That's not odd, that's ok, you have 5 digits.

You are completely right. This number is used only in formula to determine lot size. If you want to change real ST/TP, you need to modify A_Buy and A_Sell scripts.


P.S. My posts are hanging in moderation queue, that's why they appear with a little delay.

Lee, if your using a 5 digit borker you may need to change the 15 in the SetLotSize script also to get the desired resulst. Not sure about that.

I just placed another trade , but SL was touched +1 pip only (
I'm looking forward to receiving your reviews on my trades , Clay . I want to learn from my wrong trades to make my mistakes fixed
Regards !
Tuan

First, for you Neanderthals that complain about being "banned" on all my threads, could it possibly be that according to Forum rules when I place someone on the Ignore list, it automatically 'bans' them from sending me any P.M.s, any emails, or posting to any thread I start? Oh, no, it couldn't be as simple as that, it has to be a nefarious sociopath trying to screw people out of their hard earned money.

Also, perhaps IF you bothered to learn to read, you would see that there were over 60 people on my ignore list BEFORE I started this thread and all of you were just one of many who were on there for the same reason. You're assholes and you cause problems no matter where you go. Not one of you has contributed to the welfare or the improvement of this community of traders on FF. Just my personal opinion.

So, here is the challenge. I assume that someone from your group has actually had a phone conversation with whoever this edge is and can recognize his voice on the phone. Or maybe you were to stupid to do any due diligence and actually talk to the guy, or ask for credentials, or identification or something intelligent that most people would ask for before sending money to a total stranger.

SO,, I will take ONE of you off my ignore list tomorrow, or any day after that that you can choose at your leisure. That ONE person may send me a P.M. (and I will respond to it, by the way apocalypto, the reason I didn't respond to yours is that your too stupid to realize they were never sent to me as you are on my ignore list). In that P.M. give me a phone number in the U.S. that I can call and I will call and we can chat live so you can ask me any questions you want about who I am.

This is the only offer I will make before I contact my attorney about the possibility of a lawsuit for defamation of character.

Enough is enough. I thought I would have a little fun at the expense of idiots that don't have the balls to actually state who they are accusing of a fraud. You guys want to skulk around in the shadows pissing on other people's work and effort to be a benefit to others.

If you don't think it possible that someone "out of the goodness of their heart" would put this much work into something to help others, then you know nothing of kindness, nothing of charity, nothing of anything good or worthy of note.

I will stop in tomorrow night about 7 p.m. Arizona time, as that is where I live (MST for those who need to look it up) and I will take ONE of you off my list to talk to and I will respond to that one P.M.

Trotty, being that you have set yourself as arbiter to help them prove or disprove their accusations, it is up to YOU to receive the communication from the one of their group that I will take off my ignore list.

If no one responds to this challenge, then I'm done with the whole mess and that one goes back on the iggy list as well.

Apocalypto, you're treading very, very thin legal ground my friend, be careful. I would suggest that YOU be the one, if you ever actually had a live voice to voice conversation with who ever it is that F***** you. Besides, an idiot who sends his money to a stranger probably needs some serious help. Maybe a live talk with me would help.

That's the challenge, who among you idiots and Neanderthals has the stones to take up the challenge?

Anyone who wonders what this is all about, I refer you to the following threads.

The dance is a Ponzi (http://www.forexfactory.com/showthread.php?t=235852)
>Apocalypto<

Of Conmen and Mental Midgets (http://www.forexfactory.com/showthread.php?t=234503)
eclayf

Scam artists that use FOREX and FF to steal under false identities (http://www.forexfactory.com/showthread.php?t=235978)
>Apocalypto<

Twee, this is something you need to put a stop to as well my friend. These troglodytes are destroying your site and making those of us who really want to do something good wonder if FF is even worth it anymore. Your site has gone from being one I was proud to visit to being one I wonder why I am even here on anymore.

God bless you all, especially you Apocalypto, you seem to need it the most.

F3 will open the global varialbes center where you may change the variabel set in the scripts at your leisure.

god bless,

Tuan, for a while quit trying to catch the 10 EMA trades and stick to the 50 EMA trades while your working in the Simulator. You really DO need some time in the Simulator to start mastering this.

God bless,

Thanks for the explanation. I didn't know about the compile button so I have been closing and re-opening the trade sooo many times this morning. I assume it does the same thing after saving my changes.

I have managed to edit the lotsize script to allow me to trade differnt size lots, but I can not get it to work on auto ie from my risk ratio's.

From your explanations, this sounds like something you struggled with too?

Regards

Clay. I've reiterated my position on the thread, wasn't sure whether you'd misunderstood my intentions.

However, I am happy to do this if it helps. It needs to be nipped in the bud!

I just turned it off, because I don't need it right now. To turn it on you need to do this:

 

1. Open A_SetLotSize, set UseMoneyMgmt to true, save, compile.
2. Execute this script.
3. Open global variables (F3) and make sure, that ordersize is OK.

For example, I have 500 USD on my demo account, then with default values I will have:

500 * 0,02 / 19 / 2 = ~0,2

If I set SL to 190, then it will be 0,02.

That's all.

Yep, you're right. I meant, that it is not possible to modify current variable, but I didn't think of Add and Delete buttons. You may just delete variable and add it with new value.

guys I think at this point the best thing to do is let Twee sort this out and simply carry on with what you all are doing in this thread which is helping one another become better traders, this other BS will sort its self out in due course.

Quite agree - on the positive side, maybe those who haven't followed the thread might be able to pick up some useful tips!

Just double click the variable in question and change it then click outside it and close the window and it will save the new one.