I code your Expert Advisors / Indicators

Hi Manoj,

I have a system that is manual, but I need something automatic.

I would like a script that will only close a group of currency pairs.
Like close all Yen pairs only, leave all other pairs open.
Fancy would be to close all Yen Pairs in profit or close all losing Yen pairs, but leave all other pairs that do not trade Yen currency open.
Even fancier, the script could ask for these inputs: Currency=? All, Losing or Profit?
I sure hope that someone can write this.

Cheers! Great thread!

Hi,

I need the two Indicators for 5-digit broker, can someone help me to code this?

thx.
Wailer

Hey,
I am willing to try coding this up. Can you tell me what additional criteria you use on this to filter out the bad trades and also what your success rate has been on using this indicator on manual trading?

Thanks

hi i have manual strategy very profit but it's need expert

the strategy is:-

we have 2 candles 8 and 9 uk time first candle as example
candle 8 clock eur/usd closed on High 1.3550 and low 1.3500 i will take 2 orders
1- buy from 1.3550 target 20 stoploss 30
2- sell from 1.3500 target 20 stoploss 30
the price went up and the buy order active now and got the traget that will be good.if hit the stoploss i will trade sell immediately double amount the target will be 30 and the stop 30 if i got the traget 30 good if it hit the stop i will buy double amount immediately.i can do it 4 times.
the same will be for the sell order,plus the orders for candle 9
we can don't select stoploss for the 4 complication we will study this
99% am not reach to the fourth complication
we close all orders by the end of the day
thanks for help and i can explain any thing

I am looking for draggable Pending orders like they have in FXCM trade station.

That is once you place a pending order you have the ability to drag it to line it up where you want it.

Does mt4 even have anything like this? I am looking all over for it because i vaguely remember a thread on it somewhere. Not sure if it was here or another forum though.

Hi Wailer

I just downloaded those indicators, But I don't see any issue for it to work on 5 digits. Can you please explain about the issue which you're facing?

Thank you for your response and sorry to being late.
I think yes the indicator is simple.

It works as follows :

if the price Closes above or below a selected line(s) ( horizontal or diagonal ), then i receive an alert ( sound and email ) for only once, not all the time .. only after the price crosses and close above/below the line.

so, If the price closes above the resistance, then an alert message will pop in a small window that shows the time,pair,time frame, and up . same for support but down...

I think it is has to do something with the line description like I should name it "alertup" or something..

I hope it is clear now.

Regards

Maybe some one can help me find this.
I only want to trade long when the trend is long or short when the trend is short. I would love an indicator ( very small) on my chart that pointed up green and down read for 1hr, 1 day, 1 week. something that hardly takes any room. In fact if I could have one ea that does all the things below I could unclutter my chart.
ATR x 2 or adjustable even better
Spread
Trends. (not the RSI or MACD trend) the overall trend based on MA
( such as 150ma for 1 day, 300ma for 4 hr, 64 ma for 1 week)
Broker time verses GMT
( - adjustable text size, and adjustable color)

findmanu

Would you be able to code a script, that converts the price data into renko blocks. This would show the blocks in place of the normal candles on the main windows.

Tks.

Sundog.
http://static.forexfactory.com/forex...c/progress.gif

Hello,
will want an ea for it, here it goes.

this is basically on break out.

i prefer the breakout on assian market.

1 hour chat

currency = eurjpy and gbpjpy

time =12am gmt

after the close of the 12am candle

place buy 5 pips above the high

place sell 5 pips below the low

add spread to the buffers

take profit 15

stoploss 30

Note; input should be adjustable

Thanks

Hi findmanu

I'm looking for help to put an additional condition in my Buy strategy.. I have an indicator named Aaroon Horn that I downloaded from ForexFactory and I need to put in a mandatory condition for my buy strategy that reflects this indicator set to value "25". (indicator is attached).

So in plain english the translation of what I need as a condition is:
If Aaroon value is above 72 then move on to the next condition..
when I view this indicator on my chart is has 2 lines, like slow stochastics, and they cross often.. but I would want both lines to be above 72 to trigger this condition and move on to the next..

I'm not sure if this makes sense.. I would like to get this so I can add it to an EA as an additional condition to execute the trade.

Any help is awesome!
Regards,
DZ

Sorry I forget to mention. I need the value of Aaroon on the CURRENT and PREVIOUS candle to be above 72 (again for both lines displayed in aaroon indicator attached below)

that file you attached cannot be edited...that's the compiled file

actually I don't need it to be edited.. I just need to develop an EA condition in relation to this indicator.

Can you help?

Hi,

I'm Lee Lee.
I come from JB malaysia.
I m an University student.
I hope you can help me to modified a EA.

isn't allow me to do so??

Because i know findmanu are stil busy to helping other people to code some EA。

Hi Lee

I'm really ties up with lot of requests these days. Anyways if you can send the EA and tell me what changes you need, I'll take a look at it and I'll try to do it.

Hi, I'm a new learner, can help/guide me on the following code ? The idea is when signal arrow appear on the screen, tht's the time ea enter position, unlimit of position open, thanks

//---- input parameters
extern double TakeProfit=35.0;
extern double Lots=0.1;
extern double LockProfit=15.0;
extern double StopLoss=10.0;
extern double Slippage=0;
extern int Fast.MA.Period = 5;
extern int Slow.MA.Period = 34;
extern int Signal.period = 5;
//---- buffers
double Buffer1[],
Buffer2[],
b2[],
b3[],
//+------------------------------------------------------------------+
//| expert initialization function |
//+------------------------------------------------------------------+
int init()
{
//---- indicators
indicator_buffers(4);
SetIndexStyle(0,DRAW_ARROW,STYLE_SOLID,3);
SetIndexArrow(0,242); // down 226 234 242
SetIndexBuffer(0,b2);
SetIndexStyle(1,DRAW_ARROW,STYLE_SOLID,3);
SetIndexArrow(1,241); //UP 225 233 241
SetIndexBuffer(1,b3);
// These buffers are not plotted, just used to determine arrows
SetIndexBuffer (2,Buffer1);
SetIndexBuffer (3,Buffer2);
return(0);
}
//+------------------------------------------------------------------+
//| expert deinitialization function |
//+------------------------------------------------------------------+
int deinit()
{
//----
//----
return(0);
}
//+------------------------------------------------------------------+
//To define the Direction
//+------------------------------------------------------------------+
int Crossed (double MA5 , double MA34)
{
static int last_direction = 0;
static int current_direction = 0;
if(MA5>MA34)current_direction = 1; //up
if(MA5<MA34)current_direction = 2; //down
if(current_direction != last_direction) //changed
{
last_direction = current_direction;
return (last_direction);
}
else
{
return (0);
}
}
//+------------------------------------------------------------------+
//| expert start function |
//+------------------------------------------------------------------+
int start()
{
{
}
int cnt, ticket, total;
int i, counted_bars=IndicatorCounted();
double MA5,MA34,down,up;
int limit=Bars-counted_bars;
Print(" print limit = ", limit);
if(counted_bars>0) limit++;
for(i=0; i<limit; i++)
{
if(Buffer1[i] > Buffer2[i] && Buffer1[i-1] < Buffer2[i-1])=down;
//b2[i] = High[i]+10*Point;
if(Buffer1[i] < Buffer2[i] && Buffer1[i-1] > Buffer2[i-1])=up;
//b3[i] = Low[i]-10*Point;
}
for(i=0; i<limit; i++)
{
MA5=iMA(NULL,0,Fast.MA.Period,0,MODE_SMA,PRICE_MEDIAN,i);
MA34=iMA(NULL,0,Slow.MA.Period,0,MODE_SMA,PRICE_MEDIAN,i);
Buffer1[i]=MA5-MA34;
}
for(i=0; i<limit; i++)
{
Buffer2[i]=iMAOnArray(Buffer1,Bars,Signal.period,0,MODE_LWMA,i);
}
total = OrdersTotal();
if(total < 1)
{
if(up)
{
ticket=OrderSend(Symbol(),OP_BUY,Lots,Ask,Slippage,StopLoss,Ask+TakeProfit*Point,"My EA",770823,0,Green);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES))
Print("BUY order opened : ",OrderOpenPrice());
}
else Print("Error opening BUY order : ",GetLastError());
return(0);
}
if(down)
{
ticket=OrderSend(Symbol(),OP_SELL,Lots,Bid,Slippage,StopLoss,Bid-TakeProfit*Point,"My EA",770823,0,Red);
if(ticket>0)
{
if(OrderSelect(ticket,SELECT_BY_TICKET,MODE_TRADES))
Print("SELL order opened : ",OrderOpenPrice());
}
else Print("Error opening SELL order : ",GetLastError());
return(0);
}
return(0);
}
for(cnt=0;cnt<total;cnt++)
{
OrderSelect(cnt, SELECT_BY_POS, MODE_TRADES);
if(OrderType()<=OP_SELL && OrderSymbol()==Symbol())
{
if(OrderType()==OP_BUY) // long position is opened
{
// should it be closed?
if(down)
{
OrderClose(OrderTicket(),OrderLots(),Bid,3,Violet);
//close position
return(0); // exit
}
//check for trailing stop
if(LockProfit>0)
{
if(Bid-OrderOpenPrice()>Point*LockProfit)
{
if(OrderStopLoss()<Bid-Point*LockProfit)
{
OrderModify(OrderTicket(),OrderOpenPrice(),Bid-Point*LockProfit,OrderTakeProfit(),0,Green);
return(0);
}
}
}
}
else // go to short position
{
// should it be closed?
if(up)
{
OrderClose(OrderTicket(),OrderLots(),Ask,3,Violet);
//close position
return(0); // exit
}
// check for trailing stop
if(LockProfit>0)
{
if((OrderOpenPrice()-Ask)>(Point*LockProfit))
{
if((OrderStopLoss()>(Ask+Point*LockProfit)) ||
(OrderStopLoss()==0))
{
OrderModify(OrderTicket(),OrderOpenPrice(),Ask+Point*LockProfit,OrderTakeProfit(),0,Red);
return(0);
}
}
}
}
}
}
return(0);
}
//-------end of the coding-------//

Hi friend findmanu

many thanx for u.

i pm you.

HI,

but the EA that you request was expire .

I don't know still suitable or not............

how??

Lee Lee

Hello Findmanu,

I hope U would like to take a look for this EA.
this EA was very consistant and make trade very sharp. But it consistanly to take the SL poin. i give it sl 29 and tp 10. statistic shows that it touches Sl more than the TP.

Would you do me a fovour just to make the reserve open position from this EA. I have tried so badly but still can make it happend because I dont understand programming.

I attach 2 file. the real EA and the one I try to reserve. Hope you can solve it.

Best regard
Sam

fine

lets give you something really challenging, yet the simplest of all

design me an indicator which gives me the angle of standard deviation line with respect to timeline or base

the standard deviation is default mt4 indicator