Fib. Reverse Engineered. | Page 15 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

ICCE. Bemac's Fib. Reverse Engineered 2,027 replies

Can a successful system be reverse engineered? 14 replies

Reversed Engineered Trading System 27 replies

Meta Trader .. fixeing fib when scrolling 2 replies

Short Term Trades and Fib 1 reply

Attachments: Fib. Reverse Engineered.
Exit Attachments

Fib. Reverse Engineered.

  • #281
  • Apr 12, 2009 12:18pm Apr 12, 2009 12:18pm
Happy Easter. My garndkids had a wild time hunting what the Easter Bunny left behind.
Not mine. stole it from the comedy club.
Attached Image



Quoting cobraforex
I think best would be to code one only official ICCE indicator which fits the needs of all.
Me too but I think that may involve Deleting Old ones as the Indi evolves.


Quoting cobraforex
The default position of the range lines should be set in the middle of the chart (with a distance of 50 pips as default) without the need to give in the inicial values and the user drops them to the desired level.
Sounds good to me.

Quoting cobraforex
A counter of the quantity of candles in the marked range would be of help as well, also an information on the wide (in pips) of the range.
This is critical. {Length of Time Spent within The Channel} We will need it for Time Expansion.
{btw. that gets me thinking GANN Squares. Anyone with me? Square of Length + Square of Hieght...}

Quoting cobraforex
Add: forgot one thing: Once that the levels are set by dropping the range lines they should be locked there and don't change back to default if the TF is changed by the user.
Essential. We will use this feature to ensure Channel is Located properly.
  • #282
  • Apr 12, 2009 12:35pm Apr 12, 2009 12:35pm
Quoting jharteam
Hi Corbra:

By the way, I wonder if it is feasible that the ICCE indicator can produce 2-3 'boxes' simultaneously?
Have a good one
Jeff
That can be done but as an additional indi as the "delete" function (if coded) would eliminate the lines drawn the first time you used the indi.

Would be like "ICCE V1.0.mq4" and "ICCE2 V1.0.mq4"

I'm not a coder but that happened to me before with other indis and the solution was to rename the function.
  • #283
  • Apr 12, 2009 12:38pm Apr 12, 2009 12:38pm
Understood, Corbra. Thanks for the explanation. Regards

Have a good one
Jeff


Quoting cobraforex
That can be done but as an additional indi as the "delete" function (if coded) would eliminate the lines drawn the first time you used the indi.

Would be like "ICCE V1.0.mq4" and "ICCE2 V1.0.mq4"

I'm not a coder but that happened to me before with other indis and the solution was to rename the function.
~*~You are only one trade away from humility~*~
  • #284
  • Apr 12, 2009 3:14pm Apr 12, 2009 3:14pm
I knew somebody was going to ask for that (LOL).
See attached. Just be sure to give the box and the fib a different id each time you drop the indie. And dont forget to set Dontmovebox to true if you want the box to stay in the same place when you change tfs

Quoting jharteam
Hi Corbra:

By the way, I wonder if it is feasible that the ICCE indicator can produce 2-3 'boxes' simultaneously? This can be useful, especially for EOD (End of Day) and longer term intraday time frames; as I would like it to have the ability to display fib clusters. It's a bit premature to 'wish' for it but just a whim out of me. Take care.

Have a good one
Jeff
Attached Image (click to enlarge)
Click to Enlarge Name: bemac8.png Size: 49 KB
Attached File(s)
File Type: mq4 Bemac ICCE eights1.7mq4.mq4   11 KB | 401 downloads
  • #285
  • Edited 11:17pm Apr 12, 2009 3:24pm | Edited 11:17pm
Hi MissPips:

Thank you very much for this function; I'm gonna have a go at it and see if I can get some meanings out of the prices. You are the best. Take care.

Have a good one
Jeff

Quoting MissPips
I knew somebody was going to ask for that (LOL).
See attached. Just be sure to give the box and the fib a different id each time you drop the indie. And dont forget to set Dontmovebox to true if you want the box to stay in the same place when you change tfs
~*~You are only one trade away from humility~*~
  • #286
  • Edited 11:23pm Apr 12, 2009 11:11pm | Edited 11:23pm
Hi MissPips:

Could be please show me a brief walk through how I should go about tacking this indicator onto my chart. I tried many times filling in the 'topOfRange' and 'bottomOFRange' with different values but the indicator just won't budge. Does it have something to do with the 'BoxBegin', 'BoxEnd' time? If it is, could you please show me how I should be tweaking the time boxes? I'm GMT+08:00 here. And If I wanted to use the indicator on an EOD (End of Day) chart, do I also need to tweak with the time boxes as well? Here's the gif showing that the indicator was just sitting on the right side of the prices. I know there's nothing wrong with the indicator; and it's me that I have missed some important points in using it. TIA.

Have a good one
Jeff


Quoting MissPips
I knew somebody was going to ask for that (LOL).
See attached. Just be sure to give the box and the fib a different id each time you drop the indie. And dont forget to set Dontmovebox to true if you want the box to stay in the same place when you change tfs
Attached Image (click to enlarge)
Click to Enlarge Name: Noname 6.jpg Size: 143 KB
~*~You are only one trade away from humility~*~
  • #287
  • Apr 13, 2009 1:19am Apr 13, 2009 1:19am
Hi Jharteam,

Set the rangeMethod to 1, and make sure to use a different UniqueID for each instance. See attached.



Quoting jharteam
Hi MissPips:

Could be please show me a brief walk through how I should go about tacking this indicator onto my chart. I tried many times filling in the 'topOfRange' and 'bottomOFRange' with different values but the indicator just won't budge. Does it have something to do with the 'BoxBegin', 'BoxEnd' time? If it is, could you please show me how I should be tweaking the time boxes? I'm GMT+08:00 here. And If I wanted to use the indicator on an EOD (End of Day) chart, do I also need to tweak with the time boxes as well? Here's the gif showing that...
Attached Image (click to enlarge)
Click to Enlarge Name: bemac9.png Size: 59 KB
  • #288
  • Apr 13, 2009 5:00am Apr 13, 2009 5:00am
Hi All,
I'm taking advantage of the quiet holday trading to improve the indicator.
V1.8 upgrades include:
- You can choose either Bemac's fib levels or eights (default Bemac).

- You can have more than one set of fibs.

- If you choose rangeMethod =1 (connect to a range not a box), the fib lines go all the way across the screen (as they should, because they should not be anchored to a time.

- If you choose rangeMethod =1 and don't update the unique ID of the box, the box will be deleted. This is one way to clean up the screen.

- You can have both a fib connected to a box and to a range as long as you keep the unique IDs unique.

- To control the fib, either drag the box or adjust the range levels, depending on whether rangeMethod is 0 or 1.

Here are the params and their description:
UniqueIDBox - use to give the box a unique name so you can have more than one instance of the indie
UniqueID Fib - use to give the fib a unique name so you can have more than one instance of the indie
RangeMethod - 0 to connect to a box based on starting and ending hours, 1 to connect to a range. When 1, fib lines go across all the screen and are not limited to the starting hour.
TopOfRange - Use to set the top of the range when rangeMethod is 1.
BottomOfRange - Use to set the bottom of the range when rangeMethod is 1.
BoxBegin - Use to set the starting hour for the box when rangeMethod is 0.
BoxEnd - Use to set the ending hour of the box, when rangeMethod is 0.
NextDayEnd- Set to 0 when the starting hour and ending hour are on the same day, 1 when the ending hour is on the next day.
DontMoveBox - set to true when you don't want the box to move when you change timeframes or update when the indie is initialized.
UseBemacorEights- Set to 0 to use Bemac's fib levels, 1 to use eigths
e and b preface the defaults for Bemacs fib levels and eights fib levels, respectively.
ConnectFib - use to display, hide, update the fib after you moved the box.
Attached Image (click to enlarge)
Click to Enlarge Name: b2.png Size: 68 KB
Attached File(s)
File Type: mq4 Bemac ICCE eights1.8.mq4   16 KB | 404 downloads
  • #289
  • Apr 13, 2009 6:25am Apr 13, 2009 6:25am
Hi MissPips:

Thank you for your explanation and the updated indicator as well. Take care.

Have a good one
Jeff

Quoting MissPips
Hi Jharteam,

Set the rangeMethod to 1, and make sure to use a different UniqueID for each instance. See attached.
~*~You are only one trade away from humility~*~
  • #290
  • Apr 13, 2009 6:32am Apr 13, 2009 6:32am
Quoting MissPips
Hi All,
I'm taking advantage of the quiet holday trading to improve the indicator.
MissPips thanks for update. It works well. Timeframe change doesn't affect fibs any more.

Bemac thank you for a great idea.

Cheers
  • #291
  • Edited 9:51am Apr 13, 2009 8:03am | Edited 9:51am
I noticed in the other thread that sometimes the fib has to go down and not just up (in the examples where people modified the fib tool itself). So I removed the restriction that the top of range has to be greater than the bottom. Now you can drag the box over itself or have the top of range be smaller than the bottom for a fib in the opposite direction.
Attached Image (click to enlarge)
Click to Enlarge Name: b3.png Size: 55 KB
Attached File(s)
File Type: mq4 Bemac ICCE eights1.9.mq4   16 KB | 421 downloads
  • #292
  • Apr 13, 2009 10:37pm Apr 13, 2009 10:37pm
I think Bemac knows this, but we are dealing with the golden ratio.

The Golden Ratio:

http://upload.wikimedia.org/math/3/0...b16a627fee.png

The sequence, using Bemac's original numbers:
52.78-47.22= 5.56 where 5.56 is our initial constant/range/size..etc.

5.56 * 1.618 = 8.99608 (52.78+8.99608) = ~61.80
8.99608 * 1.618 = 14.55 (61.80+14.55) = ~76.40
14.55 * 1.618 = 23.55 (76.40 + 23.55) = ~100.00

I am curios as to why we are adding the 85.40 and 14.60 levels?
  • #293
  • Apr 13, 2009 11:02pm Apr 13, 2009 11:02pm
Ok, 14.55 or ~14.60.
5.56*1.618=8.99
8.99*1.618=14.55
To begin the sequence.
  • #294
  • Apr 13, 2009 11:11pm Apr 13, 2009 11:11pm
100 - 14.60 = 85.40.

Discard it if you prefer but I believe it has relevence.

See post #72
http://www.forexfactory.com/showpost...9&postcount=72

Sorrry to sound curt but my eyes hurt. honestly.
  • #295
  • Apr 13, 2009 11:56pm Apr 13, 2009 11:56pm
Quoting Bemac
100 - 14.60 = 85.40.

Discard it if you prefer but I believe it has relevence.

See post #72
http://www.forexfactory.com/showpost...9&postcount=72

Sorrry to sound curt but my eyes hurt. honestly.
Thanks, and no offense taken.
  • #296
  • Apr 14, 2009 12:08am Apr 14, 2009 12:08am
Thanks Bemac and HipsterPipster for showing how we get to arrive at these fib ratios. Helps me a lot in understanding the logics behind ICCE. Regards

Have a good one
Jeff


Quoting Bemac
100 - 14.60 = 85.40.

Discard it if you prefer but I believe it has relevence.

See post #72
http://www.forexfactory.com/showpost...9&postcount=72

Sorrry to sound curt but my eyes hurt. honestly.
~*~You are only one trade away from humility~*~
  • #297
  • Apr 14, 2009 2:15am Apr 14, 2009 2:15am
InvertFib param added to auto invert the fib without manually dragging the box or reversing the range input
Attached File(s)
File Type: mq4 Bemac ICCE eights1.10.mq4   16 KB | 352 downloads
  • #298
  • Edited 6:35am Apr 14, 2009 5:47am | Edited 6:35am
Great work miss pips, just one thing i tried to attach the indicator to a gbpusd and usdjpychart and it does not display correctly it seems something to do with the date range as instead of 24.00 - 2.00 it shows 0.00 to 0.00 across 2 days i have tried to change number of days etc with no luck . I have range method set to 0 and hrs set as per my broker which is 2hr+ gmt it works fine on eurusd.

any help would be gratefully recieved
Attached Image (click to enlarge)
Click to Enlarge Name: usdjpy.GIF Size: 73 KB
  • #299
  • Apr 14, 2009 6:42am Apr 14, 2009 6:42am
Quoting MissPips
InvertFib param added to auto invert the fib without manually dragging the box or reversing the range input
Whoa...take a couple of days off and come back to this.
I've tried to tweak the code to fix this but to no avail:
Upper Range reflects 0.528 instead of 52.786 (EJ)
Lower Range reflects 0.472 instead of 47.214 (EJ)

Wish List:
Hide the AB line (0.00 to 100.00).
Option of showing the values where they are OR in the price value column.
Ability to set each lines color, style, width.
I agree totaly with Cobra on this as I also like to see the PA as a dominat player. I know that the last one is a lot of work and going to increase the dialog box a great deal but in my opinion worth the effort. Of course this is all subject to Bemac's approval as this is his gig and he should have the final say in such matters.

Well done Pip Princess...
Listen to the whispers.... You may learn something
  • #300
  • Apr 14, 2009 6:53am Apr 14, 2009 6:53am
I tried dragging it with the default options onto a GU chart and it worked. My broker is GMT+3. Can you try opening a clean chart and dragging the attached version onto it with the default options. Another thing to try would be to drag the GU data onto an EU chart and change Don'tmovebox to false. If neither of those works, can you post a screenshot like the one I posted here.


Quoting censura
Great work miss pips, just one thing i tried to attach the indicator to a gbpusd chart and did not get anything apart from in the right hand corner of the screen . I have range method set to 0 and hrs set as per my broker which is 2hr+ gmt it works fine on eurusd any help would be gratefully recieved
Attached Image (click to enlarge)
Click to Enlarge Name: b1.png Size: 44 KB
Attached File(s)
File Type: mq4 Bemac ICCE eights1.11.mq4   16 KB | 359 downloads
File Type: ex4 Bemac ICCE eights1.11.ex4   16 KB | 261 downloads
0 traders viewing now