Fib. Reverse Engineered. | Page 8 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

ICCE. Bemac's Fib. Reverse Engineered 2,027 replies

Can a successful system be reverse engineered? 14 replies

Reversed Engineered Trading System 27 replies

Meta Trader .. fixeing fib when scrolling 2 replies

Short Term Trades and Fib 1 reply

Attachments: Fib. Reverse Engineered.
Exit Attachments

Fib. Reverse Engineered.

  • #141
  • Apr 8, 2009 8:59am Apr 8, 2009 8:59am
Quoting smjones
It does not plot a channel. I have it so you can enter inputs for the top and the bottom of the channel you want. Sounds like I am off the mark here on what is required. Oh well. LOL
I think you have it right. The user defines the channel. It would be nice to drag the lines to define the channel. Preferred but not crucial.
  • #142
  • Apr 8, 2009 9:01am Apr 8, 2009 9:01am
Quoting Bemac
Hey Scott, I notice on the Monthly Chart I posted that the Fib% lables are missing. This could be due to my total lack of experience with MT but if not, is there a way I can get them to show?

Thanks again.
Bill
They are not missing on my ibfx chart.

There is a text offset you can adjust in the input window , which corresponds to the number of bars to the left of the current bar you want the text to start from. increase that number. If someone else know of a better way to set the left value for the text, feel free to change the code. or let me know and I will do it.
Attached Image (click to enlarge)
Click to Enlarge Name: bemac icce4.gif Size: 25 KB
  • #143
  • Apr 8, 2009 9:07am Apr 8, 2009 9:07am
Scott,
Can I open this in MetaEditor? {I tried but don't see it listed}
The reason I ask is because I know the engine of this Ind & it would be a great place for me to start an understanding of MT4 language.
  • #144
  • Apr 8, 2009 9:09am Apr 8, 2009 9:09am
Quoting TradeWell
I think you have it right. The user defines the channel. It would be nice to drag the lines to define the channel. Preferred but not crucial.
Man, that would be Real Nice.

Just askin'. I don't want to appear like I am not sated but...
  • #145
  • Apr 8, 2009 9:13am Apr 8, 2009 9:13am
Quoting Bemac
Scott,
Can I open this in MetaEditor? {I tried but don't see it listed}
The reason I ask is because I know the engine of this Ind & it would be a great place for me to start an understanding of MT4 language.
You bet, open Metaeditor and then open this indicator in medaeditor. and take a look

I did something a little different on this indi. I put all the logic in the init function instead of the start function. The reason I did this is to drastically reduce CPU usage. The indi only needs to draw the lines once, and the init function only gets executed once when the indi is loaded. The start function on the other hand gets executed with every new tick that comes in, so if it is not necessary to change the indi on each tick this saves cpu big time.

Even if you change stuff a mess up the indi, just download a fresh copy from this forum and start messing with it again.

Do you need the written lessons for MT4 programming? They are on this forum, I can track them down for you if you want.

Look under the Tools tab for the editor.
  • #146
  • Apr 8, 2009 9:16am Apr 8, 2009 9:16am
Quoting Bemac
Man, that would be Real Nice.

Just askin'. I don't want to appear like I am not sated but...
That should be possible, hope that Scott is still around to have a look on it(Great work, Scott) .

I will post an indicator that does that, you can move the lines and it even has an sound alarm.

It needs to be integrated and cleaned up for this task.

Give me five minutes and I post it.
  • #147
  • Apr 8, 2009 9:21am Apr 8, 2009 9:21am
Quoting cobraforex
That should be possible, hope that Scott is still around to have a look on it(Great work, Scott) .

I will post an indicator that does that, you can move the lines and it even has an sound alarm.

It needs to be integrated and cleaned up for this task.

Give me five minutes and I post it.
I have never done that. I am only a humble average programmer. LOL

Please feel free anyone to change the code anyway you want. Please save as a different version number so they do not get confused, though.
  • #148
  • Apr 8, 2009 9:24am Apr 8, 2009 9:24am
Here is the indicator, I used it to give a breakout alarm after ranging markets.
you can move the lines (even in angle)

I hope Scott can get both indicators together.

There is a lot of coding that can be disabled for the task we need to do, more than others the sound code, two sounds should be enough.
Attached Image (click to enlarge)
Click to Enlarge Name: leo4.gif Size: 25 KB
Attached File(s)
File Type: mq4 Chin Breakout Alert V.1.2s(m MTF).mq4   26 KB | 539 downloads
  • #149
  • Apr 8, 2009 9:29am Apr 8, 2009 9:29am
Hi there,

I've tried to replicate Bemacs gold chart with the Leonardo_1d.ex4 indicator but it doesn't seem to plot the lines correctly (see attached chart). I tried refreshing it still no luck. However if I reduce the size of the channel then the fib lines start showing up. So it appears to me that it is plotting the fib lines incorrectly. Am i missing something here?

Wal
Attached Image (click to enlarge)
Click to Enlarge Name: fib.JPG Size: 92 KB
  • #150
  • Apr 8, 2009 9:31am Apr 8, 2009 9:31am
Quoting smjones
I have never done that. I am only a humble average programmer. LOL

Please feel free anyone to change the code anyway you want. Please save as a different version number so they do not get confused, though.
The first time that I can't believe a part of a post from you, lol.

Just have a look on the code, if it can be done, OK.

If not I'll try it with my Team.
  • #151
  • Apr 8, 2009 9:44am Apr 8, 2009 9:44am
Quoting cobraforex
The first time that I can't believe a part of a post from you, lol.

Just have a look on the code, if it can be done, OK.

If not I'll try it with my Team.
I will take a look.

EDIT: I haven't got a clue here. If you want to take a crack at it please do. In the mean time, I will study up on it.
  • #152
  • Apr 8, 2009 9:47am Apr 8, 2009 9:47am
Quoting smjones
I will take a look.
Great, thanks Scott

What we need to do is to associate your top and bottom to the moveable R and S lines
  • #153
  • Apr 8, 2009 9:51am Apr 8, 2009 9:51am
Quoting tradewiser
Hi there,

I've tried to replicate Bemacs gold chart with the Leonardo_1d.ex4 indicator but it doesn't seem to plot the lines correctly (see attached chart). I tried refreshing it still no luck. However if I reduce the size of the channel then the fib lines start showing up. So it appears to me that it is plotting the fib lines incorrectly. Am i missing something here?

Wal
Try the Ind posted by SMJones. & drop down a TF or 2 before applying it.
  • #154
  • Apr 8, 2009 10:03am Apr 8, 2009 10:03am
Quoting Bemac
Try the Ind posted by SMJones. & drop down a TF or 2 before applying it.
Bemac, I don't know what you think but I for myself prefere to plot the range manually instead of an indicator does it. That is what Scott is trying out now.

Sometimes you have spikes and I think those shouldn't be taken in account.

On the other side, I'm still from the generation that makes the musik by hand, lol.
  • #155
  • Apr 8, 2009 10:06am Apr 8, 2009 10:06am
Quoting cobraforex
Bemac, I don't know what you think but I for myself prefere to plot the range manually instead of an indicator does it. That is what Scott is trying out now.

Sometimes you have spikes and I think those shouldn't be taken in account.

On the other side, I'm still from the generation that makes the musik by hand, lol.
Unless Scott has a foolproof method of "Eliminating Noise" I, Definately, want to Place the 47 & 52 @ My Discretion.
After an hour or so of investigating it I would definately say that a "Drag & Drop" feature for the 47 & 52 would be greatly apprieciated.
  • #156
  • Apr 8, 2009 10:24am Apr 8, 2009 10:24am
Here is another way to get this done. Simply apply your MT4 Fib tool and add the levels shown below. Adjust as needed.

This is meant to replace the indicator being worked on here, but an option for those who prefer the tool.
Attached Image
  • #157
  • Apr 8, 2009 10:25am Apr 8, 2009 10:25am
Quoting Bemac
Unless Scott has a foolproof method of "Eliminating Noise" I, Definately, want to Place the 47 & 52 @ My Discretion.
After an hour or so of investigating it I would definately say that a "Drag & Drop" feature for the 47 & 52 would be greatly apprieciated.
Ok, I think I have it figured out,. I will work on the drag and drop. I see how to do it.
  • #158
  • Apr 8, 2009 10:30am Apr 8, 2009 10:30am
Quoting TradeWell
Here is another way to get this done. Simply apply your MT4 Fib tool and add the levels shown below. Adjust as needed.

This is meant to replace the indicator being worked on here, but an option for those who prefer the tool.
Yours looks different. Don't know the effect it may have. If any.

http://www.forexfactory.com/showpost...1&postcount=64
Attached Image
  • #159
  • Apr 8, 2009 10:34am Apr 8, 2009 10:34am
Quoting Bemac
Yours looks different. Don't know the effect it may have. If any.
It looks diifferent because you have to put "0" at the center of the consolidation range, then adjust the fib. I get the same values as the indi.

But this is neither here nor there because the indi is showing progress.
  • #160
  • Apr 8, 2009 10:38am Apr 8, 2009 10:38am
Quoting TradeWell
It looks diifferent because you have to put "0" at the center of the consolidation range, then adjust the fib. I get the same values as the indi.

But this is neither here nor there because the indi is showing progress.
Why do you use Positive & Negative 0.0278 as the "Level" Input?
0 traders viewing now