VHands Trading Simulator | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

What ever happened to VHands? 1 reply

Trading simulator or practice tool 10 replies

MTF HMA + VHands Trade = Holy Grail? 6 replies

My fib journal, vhands an all! 40 replies

Exercise for Newbs using VHands 13 replies

Attachments: VHands Trading Simulator
Exit Attachments

VHands Trading Simulator

  • #1
  • First Post: Edited 3:25pm Dec 14, 2007 2:39pm | Edited 3:25pm
OK, y'all, gather 'round.

Would you like to hear a raunchy joke or learn to use VHands Trading simulator? Your choice.

I know it's Friday afternoon, getting close to party time and all that, but every trainer on earth worth his salt will tell you to paper trade and this will take months or years off your time to profitability. Now some generous and brilliant programmer is even gonna save you the paper.

Myself, I've never done it, I was too busy trying to make money.

Alright, OK, here's the joke. It's not actually raunchy, and is probably my favorite joke of all time. It applies to trading in the sense of patience. OK?

Alright, this guy renounces the material world, divests of all earthly possesssions and joins an elite order of monks. As part of their discipline, they are allowed to say only two words every 7 years.

Seven years pass, he appears before the head monk, and says, "bed ,,, hard". And walks out.

Seven more years go by, he goes to the head monk and says, dejectedly, "food....... lousy!". Walks out the door.

Seven more years pass, he walks swiftly into the head monk's office and says, abruptly, "I .. QUIT".

The head monk replies, "I'm not surprised. You've done nothing but bitch since you got here!"
Attached File(s)
File Type: zip vTerminal.zip   1.9 MB | 52,633 downloads
  • #2
  • Dec 14, 2007 2:49pm Dec 14, 2007 2:49pm
OK, download the zip file on the post above, and put it somewhere handy, then open it.

Go to your C drive, program files, there should be a folder called Interbank FX Trader 4. If you can't find this folder, do a search.

Inside this folder is one called "experts".

Inside "experts" there is a folder called "indicators" and one called "include".

Then, copy the following files from the zip file to the following locations:

vHandsTrade.mq4 goes into "experts"
VisualTestingTools.mq4 goes into "include"
vTerminal.mq4 and vHistory.mq4 both go into "indicators"

Now shut down Interbank and restart. Or if you want to, just compile the EA vHandsTrade if you know how to do that. Interbank FX compiles everything upon startup so you can do it either way.

If you have an mq4 broker other than Interbank, I expect that the file locations will be the similar, the main file just won't be called Interbank FX Trader 4. Do a search and you'll find "experts".
  • #3
  • Edited 3:26pm Dec 14, 2007 2:54pm | Edited 3:26pm
The vHands application runs inside strategy tester.

Strategy tester is normally used to backtest an "Expert Advisor", or "EA", which is an automated trading program.

Strategy tester has a visual mode, so that you can see, tick by tick, what your EA does. In this case, we're going to use the tester to replay that past data but we will enter our own trades as we wish. No fair if you're like "rain man" and can remember every tick for the last year...

Strategy tester also does a handy thing -- if you're testing an EA called "Super Trader" for example, and there is a saved template called "Super Trader", it will automatically use that template in the visual mode of the backtest, so that you can see your indicators, or whatever you put in the template when you saved it, while the visual backtest is running.

We're going to take advantage of that, and create a template next, which will be used during the vHands run.
  • #4
  • Dec 14, 2007 3:02pm Dec 14, 2007 3:02pm
Next, open a chart, any chart, and make it look the way you like your charts to look. I mean, just candles or bars, colors, grid/no grid, etc.

Make sure you have the chart shift selected so there is some black space at the right. Either use the button or "charts" "shift" pulldown.

Don't add indicators or MA's or other clutter at this point. The purpose of this is drill to get used to price action. If you really want them later on, add them to the template and re-save.

OK, so you have a chart open. Now open the Navigator, by clicking the little folder/star button, or use the View Navigator pulldown.

Open the "custom indicators" folder and find one called vHistory.

Click on it and drag it onto your chart window. Click OK.

Do the same with the one called vTerminal.

Now save the template, either by using the template icon button, or by pulling down the "charts" "template" "save template" command and save it as this name exactly:

vHandsTrade

Don't worry about the caps, it will save in lower case, it will still work.
  • #5
  • Dec 14, 2007 3:07pm Dec 14, 2007 3:07pm
Thanks for putting this on here, and participating in my thread.

Now I don't have to answer questions about the vhands anymore? Bo either
Robonacci com
  • #6
  • Dec 14, 2007 3:16pm Dec 14, 2007 3:16pm
Now close your terminal window to make a little room. To do this, look to the left side of the screen at or near the bottom, you'll see in the frame where it says "terminal". Click the x to close it. When you need it back, find the icon, or pull down "view" "terminal".

Now open Strategy Tester, either by using the little icon with the magnifying glass, or pull down "view" "strategy tester".

You'll get a window at the bottom. Make sure it's big enough so you can see everything. This is the strategy tester, and the settings are as follows:

At the top, select vHandsTrade as the Expert Advisor.
In the next window, select your currency pair.
For Model, select "every tick"
Check the box "Use Date" and put in the dates to go from and to.
Check the box "visual mode".
Make sure "optimization" is unchecked at the right.

Then click Start. Wait for it to load the data, your chart will come up and start ticking along.

Notice that there is a speed control bar just to the right of the "Visual Mode" check box. To the right of that is a pause/play button.

Every time you hit start, it will create a new chart. Don't forget to delete the old ones. If you just want to stop temporarily, use pause. If you want to start all over, use Stop and then Start again.
  • #7
  • Dec 14, 2007 3:23pm Dec 14, 2007 3:23pm
Quoting Skunny
Thanks for putting this on here, and participating in my thread.

Now I don't have to answer questions about the vhands anymore? Bo either
You're welcome.

Just direct them over here, I'll do my best. (I'm learning it as I go)

This should really help a lot of beginners if they'll take the time to do it.
  • #8
  • Dec 14, 2007 3:44pm Dec 14, 2007 3:44pm
Now we're gonna buy.

First press the pause button. Always do this. You'll see why the first time you forget.

Now select the middle line under "Buy" (solid line). Once it's selected, click on the middle white squeare and move it onto the screen.

Select the number of lots you want, then drag it onto the screen. If you do not make a selection, the number which is purple is what you get.

If you don't want a trailing stop, select the "0" to the right of TS, then drag it onto the screen. If you want a trailing stop, select a number and drag it in.

If you want to place the stop, select the dot-dash line below Buy, then drag it to the screen at the point where you want the stop.

Otherwise you can select a number of pips for your stop.

I'm explaining a lot of things that would take you less time to learn just playing around than it would to read this.

Once you get everything set, then hit the play button and it will resume.

Go play. I'm ordering pizza.
  • #9
  • Dec 14, 2007 4:01pm Dec 14, 2007 4:01pm
Quoting blueruby
Now we're gonna buy.

First press the pause button. Always do this. You'll see why the first time you forget.

Now select the middle line under "Buy" (solid line). Once it's selected, click on the middle white squeare and move it onto the screen.

Select the number of lots you want, then drag it onto the screen. If you do not make a selection, the number which is purple is what you get.

If you don't want a trailing stop, select the "0" to the right of TS, then drag it onto the screen. If you want a trailing stop, select a number and drag it in.

If you want to place the stop, select the dot-dash line below Buy, then drag it to the screen at the point where you want the stop.

Otherwise you can select a number of pips for your stop.

I'm explaining a lot of things that would take you less time to learn just playing around than it would to read this.

Once you get everything set, then hit the play button and it will resume.

Go play. I'm ordering pizza.
whaaaaaa i had seen often LoL

tell me is it able to close an order or did i have to set every time TP and SL???
  • #10
  • Dec 14, 2007 4:19pm Dec 14, 2007 4:19pm
http://www.forexfactory.com/showpost...2&postcount=10

You are late
  • #11
  • Dec 14, 2007 5:10pm Dec 14, 2007 5:10pm
Hi bro
how long does it take to load the data? thanks in advance.
regards
Quoting blueruby
Now close your terminal window to make a little room. To do this, look to the left side of the screen at or near the bottom, you'll see in the frame where it says "terminal". Click the x to close it. When you need it back, find the icon, or pull down "view" "terminal".

Now open Strategy Tester, either by using the little icon with the magnifying glass, or pull down "view" "strategy tester".

You'll get a window at the bottom. Make sure it's big enough so you can see everything. This is the strategy tester, and the settings are as follows:

At the top, select vHandsTrade as the Expert Advisor.
In the next window, select your currency pair.
For Model, select "every tick"
Check the box "Use Date" and put in the dates to go from and to.
Check the box "visual mode".
Make sure "optimization" is unchecked at the right.

Then click Start. Wait for it to load the data, your chart will come up and start ticking along.

Notice that there is a speed control bar just to the right of the "Visual Mode" check box. To the right of that is a pause/play button.

Every time you hit start, it will create a new chart. Don't forget to delete the old ones. If you just want to stop temporarily, use pause. If you want to start all over, use Stop and then Start again.
  • #12
  • Dec 14, 2007 6:35pm Dec 14, 2007 6:35pm
Thanks Blueruby, this info is a great.
Tom
  • #13
  • Edited 8:22pm Dec 14, 2007 6:45pm | Edited 8:22pm
Quoting melpheos
http://www.forexfactory.com/showpost...2&postcount=10

You are late
You are welcome to use that, however, it is not clearly written and leaves out important points. It is not in logical order, and, part of it is in Cyrillic. And you can't ask it questions.

That is why I am doing this, because people had trouble with that same set of instructions you cite. So use whichever you prefer.

OK?
  • #14
  • Dec 14, 2007 6:49pm Dec 14, 2007 6:49pm
Quoting kenneith
Hi bro
how long does it take to load the data? thanks in advance.
regards
Takes maybe 30 seconds for my setup. It might depend on connection - I have DSL which isn't blazing fast, but is probably 100x faster than dialup.

If you have a fast connection and it isn't running within a few minutes, there is another problem.

Make sure you have the visual box checked.
  • #15
  • Edited 7:15pm Dec 14, 2007 6:50pm | Edited 7:15pm
Quoting Iqtrading
whaaaaaa i had seen often LoL

tell me is it able to close an order or did i have to set every time TP and SL???
OK, to close an order, select the ticket number and then move it. The ticket number will be in the indicator window with the running orders, in the far left column. Once it is moved at all, the order will close.
  • #16
  • Dec 14, 2007 7:14pm Dec 14, 2007 7:14pm
To modify an order, you simply move the field that contains the data you wish to modify.

Example: to change the take profit from 0.00 to 234.10.

In the vHistory indicator window, in the Take Profit column, select the number 0.0 and move it.

A yellow line appears on the chart.

Click on the line to select it.

Move it to 234.10. The numerical value of Take Profit for that order will change.

Once you've moved the line, it should change back to red and you're done.
  • #17
  • Dec 14, 2007 7:28pm Dec 14, 2007 7:28pm
Thanks a lot, will definitely try this out.

andersenws
"Youth is the trustee of prosperity." - Benjamin Disraeli
  • #18
  • Dec 14, 2007 8:32pm Dec 14, 2007 8:32pm
Quoting blueruby
You are welcome to use that, however, it is not clearly written and leaves out important points. It is not in logical order, and, part of it is in Cyrillic. And you can't ask it questions.

That is why I am doing this, because people had trouble with that same set of instructions you cite. So use whichever you prefer.

OK?

You got that right! I was having a tough time with it until you started this thread. I couldn't figure out how to buy, sell or close out postions. And the one hint about pausing before placing an order - geez, sure would've been nice to know about this earlier!!!!

Thanks alot Blueruby
  • #19
  • Dec 15, 2007 1:25am Dec 15, 2007 1:25am
Thanks for these instructions blueruby. I had this stuff all installed last night but had no idea what to do with it until your thread here. Thanks for making it plain for us.

Now if I can just figure out how I'm ever gonna get away from this computer monitor...
Is your SL my TP?
  • #20
  • Dec 15, 2007 5:29am Dec 15, 2007 5:29am
Quoting blueruby
OK, to close an order, select the ticket number and then move it. The ticket number will be in the indicator window with the running orders, in the far left column. Once it is moved at all, the order will close.

thanks that help me a lot, happy price action catching =)
0 traders viewing now