Auslanco 15min GBP/JPY startegy | Page 14 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Auslanco - GBP/JPY and GBP/USD (newstrade) 235,581 replies

Auslanco-GBP/JPY Strength Indicator strategy 345 replies

My MT4 indicators for Auslanco's strategy 92 replies

manual startegy testing in mt4 2 replies

Questions About Auslanco's Trades 72 replies

Attachments: Auslanco 15min GBP/JPY startegy
Exit Attachments

Auslanco 15min GBP/JPY startegy

  • #261
  • Oct 1, 2007 12:53am Oct 1, 2007 12:53am
  •  MPP
  • Joined Jun 2007 | Status: Be yourself, everyone else is taken | 2,734 Posts
Quoting senbanda
Hi MPP
Thanks for all the information.
How do I change the daily pivot for the
different sessions. I apologise if this is a basic
set up but I am not a technical person.
Because Auslanco write it in his thread I dont
miss it but there are days I miss reading the thread
due to work and it has grown so long.
Thanking you in advance
Senbanda
2 ways
1) hold mouse directly on current daily pivot and right click, select daily properties andajust the day start to your required time

2) right click any point on chart and select indicator, select pivot indicator
and adjust as per number 1.

hope this helps

regards

MPP
  • #262
  • Oct 1, 2007 5:39am Oct 1, 2007 5:39am
thank you MPP Greatly appreciated
Senbanda
  • #263
  • Oct 1, 2007 12:51pm Oct 1, 2007 12:51pm
SL 60 pips
TP 100 pips

is this always the case or is there a different way of calculating the TP for 15m strategy trades?
Trade what you see, not what you think.
  • #264
  • Oct 1, 2007 3:02pm Oct 1, 2007 3:02pm
Quoting MPP
hope this helps

Attachment

Attachment
I downloaded the mt file and I just wanted to clarify the custom indicator selections.
The variable pivot set value would be 1 ( day ), 2 ( week ) , 3 ( month )
The day start hour we would plug in the proper times 1900 asian, london/us 0300, us 0800 all est. These pivots would apply to all time frames
Thanks for your help
  • #265
  • Oct 2, 2007 12:50am Oct 2, 2007 12:50am
  •  MPP
  • Joined Jun 2007 | Status: Be yourself, everyone else is taken | 2,734 Posts
Quoting PipCop
I downloaded the mt file and I just wanted to clarify the custom indicator selections.
The variable pivot set value would be 1 ( day ), 2 ( week ) , 3 ( month )
The day start hour we would plug in the proper times 1900 asian, london/us 0300, us 0800 all est. These pivots would apply to all time frames
Thanks for your help

hi Pip
Aus's uses the daily pivot (1), but someone had explained the various numbers so i added them for understanding reasons.

the pivot time are changed at the start of each session, except for the US this is changed when london closes (1100est). you need to allow for offsets ie time zone difference (EST to GMT).

with regards time frames, the pivots are only used in the 15m stratagy, not the 4h.

regards

MPP
  • #266
  • Oct 2, 2007 7:31am Oct 2, 2007 7:31am
Quoting karmostaji
SL 60 pips
TP 100 pips

is this always the case or is there a different way of calculating the TP for 15m strategy trades?

That is usually the case for the moment but when in a long position one have to be careful at R1 level and vice versa for a short... R1 or S1 can also be used as a tp level
  • #267
  • Oct 2, 2007 7:48am Oct 2, 2007 7:48am
Quoting brok
That is usually the case for the moment but when in a long position one have to be careful at R1 level and vice versa for a short... R1 or S1 can also be used as a tp level
Great, thanks brok
Trade what you see, not what you think.
  • #268
  • Oct 2, 2007 10:22am Oct 2, 2007 10:22am
Quoting MPP
hi Pip
Aus's uses the daily pivot (1), but someone had explained the various numbers so i added them for understanding reasons.

the pivot time are changed at the start of each session, except for the US this is changed when london closes (1100est). you need to allow for offsets ie time zone difference (EST to GMT).

with regards time frames, the pivots are only used in the 15m stratagy, not the 4h.

regards

MPP
Thank you MPP
  • #269
  • Oct 2, 2007 7:28pm Oct 2, 2007 7:28pm
What should I add on this chart?
I dont see any dots before the Arrow.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: chart.PNG Size: 122 KB
Click to Enlarge Name: chart3.PNG Size: 41 KB
Attached Image
  • #270
  • Oct 4, 2007 1:30pm Oct 4, 2007 1:30pm
Quoting Syafi
What should I add on this chart?
I dont see any dots before the Arrow.
I think that you should add the other customised trading sistem, the QQE60 alert, that will give you the dots....
Attached File(s)
File Type: vttrs QQE_alert con puntos.vttrs   2 KB | 443 downloads
  • #271
  • Oct 6, 2007 8:55am Oct 6, 2007 8:55am
Aus,

I have been doing some research into last weeks issues with ranging and came across the following for the mt4-level-stop-reverse indicator.

Adjust nonATRstoppips to 100 and change the use atr mode to false.

From my manual testing this would have given about 240 ish pips last week.

I've attached a chart below to show how it flows.
Attached Image (click to enlarge)
Click to Enlarge Name: gj analysis.gif Size: 28 KB
  • #272
  • Edited 3:20pm Oct 8, 2007 10:28am | Edited 3:20pm
Hello
I am new to ff and for trading as well. i know it sounds silly but i am not able to find Level stop Reverse Version 2, QQE Alert and ATR Multiplier on VT charts. Although i found ATR but i could not understand if i hv to to put the value for simple moving average or for wilder. can anyone help me in this? i have windows vista and i am not able to download the links from here so i would be greatful if anyone could send me the links on my email.once again thanks a lot for you learned guys who have put so much of efforts.

regards
kenneith
Quoting auslanco
Developed by Spanishfly based on my original 4hr/1hr MTF strategy.

15 min (Intra-day) GBP/JPY for VT charts . Charts can be downloaded free via www.vtsystems.com)

a).Simple Moving Average 5 close
b).Gann Hi Low Activator 10
c).Level stop Reverse version 2

Values : ATR Periods 9
ATR Multiplier 3

d).QQE alert
Values: Smoothing Factor 60





Buy : Wait for the two buy alerts.(Green arrow and Blue dot). Buy when the price hits 5 SMA after the two signals.

Stop Loss: Right below the confirmation bar on the Gann Hi low Activator line.

Take profit: Calculate the distance between OPEN price of the confirmation bar and the price of the Gann Hi low Activator(TFT line) at that point and multiply it by 2. (twice as your stoploss )
My TP targets are as follows and an example of lot allocation(total lots 5):
1st TP: 2 X Stoploss (4-Lots)
2nd TP: Reverse signal confirmation(1-Lot)


Total profits for 5 days live forward testing (since 26/August) : 923 pips on TP1 (7 trades) 6 wins 1loss

This strategy is currently on Forward testing stage. Please demo trade this at least for 2 months
  • #273
  • Oct 8, 2007 11:12am Oct 8, 2007 11:12am
  •  MPP
  • Joined Jun 2007 | Status: Be yourself, everyone else is taken | 2,734 Posts
Quoting kenneith
Hello
I am new to ff and for trading as well. i know it sounds silly but i am not able to find Level stop Reverse Version 2, QQE Alert and ATR Multiplier on VT charts. Although i found ATR but i could not understand if i hv to to put the value for simple moving average or for wilder. can anyone help me in this? i have windows vista and i am not able to download the links from here so i would be greatful if anyone could send me the links on my email id [email protected], once again thanks a lot for you learned guys who have put so much of efforts.

regards
kenneith

Hi Kenneith
VT i can't help you with but i would advise you to remove the email address, place it in your profile. putting it out here will allow email hunters to send you tons of crap emails.

I have posted 2 documents with all the settings for mt4.

I am sure someone will be here to help with VT soon.

MPP
  • #274
  • Oct 8, 2007 3:09pm Oct 8, 2007 3:09pm
How do I get the Level stop Reverse version 2 I downloaded VT Trader 2 times and alll I have is the old one
  • #275
  • Oct 8, 2007 3:23pm Oct 8, 2007 3:23pm
Hi MPP
Thanks for your advise. I have done as you told me.
regards
Quoting MPP
Hi Kenneith
VT i can't help you with but i would advise you to remove the email address, place it in your profile. putting it out here will allow email hunters to send you tons of crap emails.

I have posted 2 documents with all the settings for mt4.

I am sure someone will be here to help with VT soon.

MPP
  • #276
  • Oct 9, 2007 12:35am Oct 9, 2007 12:35am
Quoting amsterdanny
After reading the documents strategy again I noticed that two different 2nd. TP methods are given. So my previous explanation could be wrong according to this difference. I ask Auslanco to confirm which 2 nd. TP is used. In the doument an example is given where is stated that the 2nd. TP is 3x the S/L level.
I guess that is why it is in Beta at the moment.

Danny
Testing trying to get subsciption to work
Life's a bitch....so be a dog and cover it!
  • #277
  • Oct 9, 2007 11:16pm Oct 9, 2007 11:16pm
Quoting Rustyyy
Running this strategy on demo.
Can't seem to find the 2 signals(dot and arrow) together as per the details on pg 1 of thread.

Am I missing something ?
Rusty...this might help....I changed the "DOT Distance" on the QQE indicator to 10 from 25.....it pulls the dot closer to the trend line so you can see it more often.

Hope that helps
Life's a bitch....so be a dog and cover it!
  • #278
  • Oct 12, 2007 10:16pm Oct 12, 2007 10:16pm
I've read through the thread and am impressed with this strategy. I'm surprised that there aren't many people posting lately however? How is it working for others? If anyone on the thread could tell me how they traded it on Friday I'd appreciate it.

After loading the indicators it seemed the strategy gave me a couple clear entries Thursday, but Friday was a bit confusing as GBPJPY was a bit choppy. If anyone could give me feedback on my setup of the indicators and even markyp my chart it would be enlightening. To me it seemed there was a clear trade late in the day when the QQE-5 broke above the 50 and price broke above the daily pivot. Was this the only clear trade indicated by this strategy on Friday?

Thanks for your help.

LeoM
Attached Image (click to enlarge)
Click to Enlarge Name: auc_15m_101207.gif Size: 13 KB
  • #279
  • Edited 7:41am Oct 13, 2007 7:17am | Edited 7:41am
Quoting Leomeister
I've read through the thread and am impressed with this strategy.

LeoM
Hi,

This is indeed a good strategy but still on a beta test phase. There have been some improvements and filters added. On friday when the indicators have given a long signal one should have waited the price to come over the session pivot and sma100. Once taken over these levels you could enter the trade like you have done so... (long 238,73 ish) Other than that you may have gone short earlier when QQE s were all bearish since the price was below session pivot and ma.
  • #280
  • Oct 17, 2007 4:57am Oct 17, 2007 4:57am
what is vt chart trading system? how does it work
0 traders viewing now