I will code your EAs and Indicators for no charge

Quoting Shargyn

Disliked

{quote} Do it like this in code // Если значение индикатора 1 = Lime!, 2 = Red! , 0 = 0. // считаем, что сигнал только что появился. if(ex4ValueCurr > 0 )//&& ex4ValuePrev < 0) prevSignal = 1; else if(ex4ValueCurr < 0 )//&&...

Ignored

Quoting Rubernet

Disliked

A request to have a popup alert with sound created for the attached DTosc indicator for when the red crosses the blue line. Thankful in advance {file}

Ignored

#property copyright ""
#property indicator_separate_window
#property indicator_buffers 2
#property indicator_minimum 0
#property indicator_maximum 100
#property indicator_color1 Red    // SK (red line)
#property indicator_color2 Blue   // SD (blue line)
#property indicator_width1 2
#property indicator_width2 2
#property indicator_level1 30
#property indicator_level2 70
//---- Входные параметры для расчёта индикатора
extern int PeriodRSI   = 13;
extern int PeriodStoch = 8;
extern int PeriodSK    = 5;
extern int PeriodSD    = 3;
// 0 = SMA, 1 = EMA, 2 = SMMA, 3 = LWMA
extern int MAMode      = 0;
//---- Входные параметры для сигналов (отдельно можно отключать)
extern bool EnableAlert_CrossSignal    = true; // Сигнал: синяя пересекает красную
extern bool EnableAlert_RelativeSignal = true; // Сигнал: синяя находится выше/ниже красной
double SK[];      // Буфер для красной линии (SK)
double SD[];      // Буфер для синей линии (SD)
double StoRSI[];
double RSI[];
//+------------------------------------------------------------------+
//| Инициализация индикатора                                         |
//+------------------------------------------------------------------+
int init()
{
   IndicatorBuffers(4);
   SetIndexBuffer(0, SK);
   SetIndexBuffer(1, SD);
   SetIndexBuffer(2, StoRSI);
   SetIndexBuffer(3, RSI);
   IndicatorShortName("DTOSC ("+PeriodRSI+","+PeriodStoch+","+PeriodSK+","+PeriodSD+")");
   return(0);
}
int deinit() { return(0); }
//+------------------------------------------------------------------+
//| Основной расчет значений индикатора                              |
//+------------------------------------------------------------------+
int start()
{
   int i, limit;
   int counted_bars = IndicatorCounted();
   if(counted_bars < 0) return(-1);
   if(counted_bars > 0) counted_bars--;
   limit = Bars - counted_bars;
   
   // Расчёт STO RSI
   for(i = limit; i >= 0; i--)
   {
      RSI[i] = iRSI(NULL, 0, PeriodRSI, PRICE_CLOSE, i);
      double LLV = RSI[ArrayMinimum(RSI, PeriodStoch, i)];
      double HHV = RSI[ArrayMaximum(RSI, PeriodStoch, i)];
      if((HHV - LLV) != 0)
         StoRSI[i] = 100.0 * ((RSI[i] - LLV) / (HHV - LLV));
      else  
         StoRSI[i] = 0;
   }
   
   // Вычисляем SK (Red) и SD (Blue)
   for(i = limit; i >= 0; i--)
      SK[i] = iMAOnArray(StoRSI, 0, PeriodSK, 0, MAMode, i);
   for(i = limit; i >= 0; i--)
      SD[i] = iMAOnArray(SK, 0, PeriodSD, 0, MAMode, i);
      
   // --- Блок проверки сигналов ---  
   // Используем закрытый бар с индексом 1 (последний полностью сформированный бар)
   // для анализа, а бар с индексом 2 – для сравнения предыдущего состояния.
   if(Bars >= 3)
   {
      int alertBar = 1; // анализируем закрытый бар
      
      // Для предотвращения повторных оповещений для каждой группы используем отдельные статические переменные.
      static int lastAlertBar_Cross = -1;    // для группы пересечения
      static int lastAlertBar_Relative = -1;   // для группы относительного положения
      static int lastRelativeState = 0;        // 1: Blue above red, 2: Blue below red
      string message=0;
      // ---- Группа 1: Сигнал пересечения линий ----
      if(alertBar != lastAlertBar_Cross && EnableAlert_CrossSignal)
      {
         // Условие пересечения: сравниваем значения на баре alertBar (индекс 1)
         // и предыдущем баре (индекс 2).
         // Если синяя линия (SD) на баре 1 становится выше красной (SK), а на баре 2 была ниже или равна,
         // значит произошло пересечение снизу вверх.
         if(SD[alertBar] > SK[alertBar] && SD[alertBar+1] <= SK[alertBar+1])
         {
            message = "Alert: Blue crossed red upward";
            Alert(message);
            PlaySound("alert.wav");
            lastAlertBar_Cross = alertBar;
         }
         // Если синяя линия (SD) на баре 1 становится ниже красной (SK), а на баре 2 была выше или равна,
         // значит произошло пересечение сверху вниз.
         else if(SD[alertBar] < SK[alertBar] && SD[alertBar+1] >= SK[alertBar+1])
         {
            message = "Alert: Blue crossed red downward";
            Alert(message);
            PlaySound("alert.wav");
            lastAlertBar_Cross = alertBar;
         }
      }
      
      // ---- Группа 2: Сигнал относительного положения линий ----
      if(alertBar != lastAlertBar_Relative && EnableAlert_RelativeSignal)
      {
         int currentRelativeState = 0;
         if(SD[alertBar] > SK[alertBar])
            currentRelativeState = 1; // Blue above red
         else if(SD[alertBar] < SK[alertBar])
            currentRelativeState = 2; // Blue below red
         
         // Если состояние изменилось по сравнению с предыдущим оповещённым,
         // отправляем соответствующее сообщение.
         if(currentRelativeState != 0 && currentRelativeState != lastRelativeState)
         {
            if(currentRelativeState == 1)
            {
               message = "Alert: Blue is above red";
               Alert(message);
               PlaySound("alert.wav");
            }
            else if(currentRelativeState == 2)
            {
               message = "Alert: Blue is below red";
               Alert(message);
               PlaySound("alert.wav");
            }
            lastRelativeState = currentRelativeState;
            lastAlertBar_Relative = alertBar;
         }
      }
   }
   // -------------------------------------------------
   return(0);
}
//+------------------------------------------------------------------+

Quoting BestTraderEv

Disliked

{quote} This .mq4 was tweaked a bit: {file} Then I attempted to convert it to MQL5, and I was successful, however I kept getting "indicator is too slow" message, so I asked DeepSeek for assistance and this is what we got: {file} It seems to be working quicker, but still generates "indicator is too slow" message occasionally. If anybody can do better, you're input is welcome.

Ignored

Quoting sinohe6

Disliked

{quote} Thank you so much bro for all your efforts

Ignored

Quoting Shargyn

Disliked

{quote} Do you need open source? It’s just dangerous to give you open source code, as I understand it, you’re just tinkering with them without basic knowledge. //---- Входные параметры для сигналов (отдельно можно отключать) extern bool EnableAlert_CrossSignal...

Ignored

Quoting MwlRCT

Disliked

{quote} --- Root Cause

Ignored

Quoting BestTraderEv

Disliked

{quote} I corrected mistakes and recoded for MQL4/5: {file} {file} Do not change the file name!!!

Ignored

Quoting Shargyn

Disliked

{quote} Do you need open source? It’s just dangerous to give you open source code, as I understand it, you’re just tinkering with them without basic knowledge. //---- Входные параметры для сигналов (отдельно можно отключать) extern bool EnableAlert_CrossSignal...

Ignored

Quoting Rubernet

Disliked

{quote} Hi Shargyn Thank you appreciate, please just check, the alert is currently using the blue line as the signal line, it must alert when the red line crosses the blue line down or up. Also please add in the alert which currency pair. Best

Ignored

Quoting str8v4lu3

Disliked

It's also ok without background color, but if the line would change color if the price closed above D1 openline (green) or below D1 openline (red){file}

Ignored

Quoting Metatrader

Disliked

Hey Guys, i want to learn and improve my MQL4 skills. I think the best way to do this is to practice. Unfortunately sometimes I don`t have any nice idea which i can implement in a Expert Advisor / Indicator. So if any of you is interested, please post in this forum your ideas and i will try to implement it into mql4. Andi

Ignored

Quoting Shargyn

Disliked

{quote} You have two signals, choose which one you need. both signals are now on. extern bool EnableAlert_CrossSignal = true; // Signal: blue crosses red extern bool EnableAlert_RelativeSignal = true; // Signal: blue is above/below red And now here they are both already turned off. extern bool EnableAlert_CrossSignal = false; // Signal: blue crosses red extern bool EnableAlert_RelativeSignal = false; // Signal: blue is above/below red Bro, they both work. Take my word for it. I give you my teeth. Maybe I should sing another prayer, although I am...

Ignored

Quoting classy

Disliked

my humble request to cja or any master coder please look into attached great indicator and if possible than add options like hod lod but add 2 more option candle number mention and show historical for example if i mention 4 candle than show high of the 4 candle and low of the 4 candle for any time frame for example 4/5 month candle high low..week..day..4h high of the moth low of the moth ..hom lom high of the week and low of the week ..how low. I posted earlier many post about this there are so many example . You can check attached link https://www.forexfactory.com/showthr...9#post11041509...

Ignored

Quoting str8v4lu3

Disliked

I am searching for a daily open background colour indicator for MT5.... When price is above D1 openline, the background for this day should be green for bullish.. When price is below D1 openline, the background for this day should be red for bearisch.. It's also ok without background color, but if the line would change color if the price closed above D1 openline (green) or below D1 openline (red)... I'm attaching the daily open line indicator in the case that anybody of the coders find the time to create something like that.... I thank you from...

Ignored

Quoting stephenfdo

Disliked

Hi my Friends, I need a help with an EA, If i put a trade X lot in a pair and i need to make $1 in the trade. After it gain $1 profit then it should automatically trail it to breake even .once it goes to $2 then it should trail it to $1,after $1 profit then it should automatically trail the profit to every $1 I want to move the stop loss to breakeven after a $1 profit, and then trail the stop loss at every $1 profit after that (e.g., $2 profit moves the SL to $1, $3 moves it to $2, and so on). Once the trade hits a $1 profit, we move the stop loss...

Ignored

Quoting BestTraderEv

Disliked

{quote} {file} {file}

Ignored