Menu
Sister Sites

Options

Bookmark Thread

First Page First Unread Last Page Last Post

Print Thread

Similar Threads

I will code your pivot EAs for no charge 25 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

Hello Couder's: if anyone had a good weekend, I hope everyone did! I have this "tcci" indicator, and I wanted to put arrows and BT on it, I know there may be better things, but I always had the thorn of knowing how it would behave this way, if anyone takes pity on this request, I would be very grateful.
Attached File(s)
File Type: mq4 tcci_mtf.mq4   5 KB | 60 downloads
Quoting BestTraderEv
{quote} OK, so, this is what I have decided to do, and tested it, too: I tested two indicators: {file}{file} I modified both of them so that they would not plot any arrows on Bar[0]. Of course: Do not change the files names!!! NOTE!!! The two indicators do not work exactly the same, so it's up to the user to figure out which is better with the EA. So, I made it possible in the EA to select which one of the indicators to use as signal source. {file} Do not change the file name!!! Otherwise: I added: "Use Ask/Bid Condition" - if true, the EA will...
Unfortunately, it places no trades with either indy.
Quoting OutThere
{quote} Unfortunately, it places no trades with either indy.
Then you must be doing something wrong.
It was trading properly yesterday, at least with the MTF nrp indicator.
The first one is not stable, or IOW, it looks like it's working properly for many hours, and then, out of nowhere, I see the lines and arrows in some awkward places... No errors or anything.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting jblanked
{quote} Enjoy brother. {file}
I have 4 Half-Trend indicators on this chart.
The Aqua-Yellow is the one I'm working on (from the source code posted by @Hercs).
The DodgerBlue-Red one is the .ex4 you posted.
The other two are from forex-station:
The bigger arrows is the MTF nrp which I posted with the EA.
The diamond arrow is another one, from a historgram Half-Trend.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-12-03_131851.jpg Size: 124 KB
As you see, yours failed to produce an arrow.
Mine produced an arrow later.
The two from forex-station are working in-line with each other, but they are plotting differently than mine and yours.

NOTE: The one I call "mine" has not been posted, yet!
It is my most recent modification from today, and the EA is trading it.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-12-03_132731.jpg Size: 122 KB

However, which version will perform better overall, I don't know.

About 2 and a half hours later this is the picture:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-12-03_160549.jpg Size: 138 KB
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} Then you must be doing something wrong. It was trading properly yesterday, at least with the MTF nrp indicator. The first one is not stable, or IOW, it looks like it's working properly for many hours, and then, out of nowhere, I see the lines and arrows in some awkward places... No errors or anything.
Maybe someone else has been able to make it work? Or like me they couldn't make it work?
Does anyone test ea's any more?
My platform is running synchronising in the History Centre and 2 candles at a time.
How can i stop it, plse?
Hercs.
Attached Image (click to enlarge)
Click to Enlarge Name: History Centre syncing.PNG Size: 15 KB
Hercs
Quoting OutThere
{quote} Maybe someone else has been able to make it work? Or like me they couldn't make it work? Does anyone test ea's any more?
=====

Mine is working - see attached.
Did not take the reverse trade though.

Hercs.
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 9 KB
Hercs
Quoting Hercs
{quote} ===== Mine is working - see attached. Did not take the reverse trade though. Hercs. {image}
Could it be because I am using a 3 setting as opposed to 2 setting of the HT, BestTraderEv?
As long as that setting corresponds, it should not be a problem?
Just confirming.
Hercs.
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 9 KB
Hercs
Quoting BestTraderEv
{quote} I have 4 Half-Trend indicators on this chart. The Aqua-Yellow is the one I'm working on (from the source code posted by @Hercs). The DodgerBlue-Red one is the .ex4 you posted. The other two are from forex-station: The bigger arrows is the MTF nrp which I posted with the EA. The diamond arrow is another one, from a historgram Half-Trend. {image}As you see, yours failed to produce an arrow. Mine produced an arrow later. The two from forex-station are working in-line with each other, but they are plotting differently than mine and yours. NOTE:...
Hello master BestTraderEv,
bro would you please kindly add push notification to this Indicator
Best Regards
Attached File(s)
File Type: mq4 Gann High-Low activator histo3clr nmc.mq4   7 KB | 62 downloads
Quoting tzamo
{quote} Hi, this should do it. Assuming I correctly understood. I also made the timeframe input a drop-down, so no need to type in the timeframes. Enjoy Edit: updated to draw on High/ Low instead of close... {file}
Hi guys,

first I would like to thank Tzamo for helping,

On the original indicator the arrows changed depending if price was above or below.

Tzamo has made some changes and now the lines are were I asked but the arrows do not move, i talked to him and he told me that he had no time to fix it further so if anyone is willing to give it a go i would really appreciated. The updated indicator is on his post

thanks
kind regards
edit: find attached indicator with the TZamo changes on it
Attached File(s)
File Type: mq4 174030_-_Modify_q-Opn_Line_1.mq4   15 KB | 49 downloads
Quoting SamuelM
{quote} I am experiencing the same thing Sir. I'm not sure whether my broker is the problem may you please confirm if it does work on your side please. Thanx u
Yes.. mine is okay and its looked promising . But the trade only on Monday. The pending order trigger after one day. And its profitable for xauusd.
Quoting Hercs
{quote} Could it be because I am using a 3 setting as opposed to 2 setting of the HT, BestTraderEv? As long as that setting corresponds, it should not be a problem? Just confirming. Hercs. {image}
Yes, that was also the problem with that one.
Now it seems to be working:
Look back at post:
https://www.forexfactory.com/thread/...9#post15078019
at the new image.
Ours is the Aqua-Yellow lines.
Now with today's tweaks, it produces the signals.

The one offered by @jblanked unfortunately needs to be trashed, because it doesn't refresh the data, and it's .ex4, so it's useless.

Please try with this version:
Attached File(s)
File Type: ex4 Half-Trend_orig_Indi_For_EA_BTEv.ex4   18 KB | 100 downloads

Do not change the file name!!!

Also, I was able to update the previous post:
https://www.forexfactory.com/thread/...2#post15077372

And, it's reversing, as well.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} Yes, that was also the problem with that one. Now it seems to be working: Look back at post: https://www.forexfactory.com/thread/...9#post15078019 at the new image. Ours is the Aqua-Yellow lines. Now with today's tweaks, it produces the signals. The one offered by @jblanked unfortunately needs to be trashed, because it doesn't refresh the data, and it's .ex4, so it's useless. Please try with this version: {file} Do not change the file name!!! Also, I was able to update the previous post: https://www.forexfactory.com/thread/...2#post15077372...
===
Much appreciated, thanks BestTraderEv.
Hercs.
Hercs
Quoting OutThere
{quote} Maybe someone else has been able to make it work? Or like me they couldn't make it work? Does anyone test ea's any more?
1. You need to make sure that you have the latest versions of all the files.
2. You need to make sure that your EA inputs are correct. If the spread on your instrument is larger than "Maximum Spread Points Allowed", the EA will not send any orders. Also, if you are using the "Use Ask/Bid Condition", you may or may not get any orders, depending on how the market is behaving.
3. The "Timeframe for MTF Verison" only applies to the MTF indicator.
And, if it's working on my charts, there is no reason why it shouldn't be working on your charts.
I am now running it live on DJI30 M1 with Amplitude = 1 just for the sake of testing the functionality, and it is doing the job.

PS. I am not testing if it's going to be profitable, or not.
This may or may not depend on other factors, like the ability of the trader to adjust the parameters to the specific market, and their ability to know when to turn the EA On and Off.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting Hercs
My platform is running synchronising in the History Centre and 2 candles at a time. How can i stop it, plse? Hercs. {image}
I have never seen such a log message.
The only idea which comes to mind is the Renko Generator?
Otherwise I don't know what's running on your charts?
You need to remove indicators one-by-one to see which one is doing this.
And then open some default blank charts, and see if it's still happening, or not.
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} Yes, that was also the problem with that one. Now it seems to be working: Look back at post: https://www.forexfactory.com/thread/...9#post15078019 at the new image. Ours is the Aqua-Yellow lines. Now with today's tweaks, it produces the signals. The one offered by @jblanked unfortunately needs to be trashed, because it doesn't refresh the data, and it's .ex4, so it's useless. Please try with this version: {file} Do not change the file name!!! Also, I was able to update the previous post: https://www.forexfactory.com/thread/...2#post15077372...
========
It did not take the trade inspite of amplitudes being 2 on both.
See attached:
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 2 KB
Hercs
Quoting Hercs
{quote} ======== It did not take the trade inspite of amplitudes being 2 on both. See attached: {image}
The attached image tells me completely nothing.
I am running it on DJI30 M1 and it's working properly.
Losing money, but working properly.
I already mentioned to you, that with Renko Bricks there can be other problems.
There is no way that we can guarantee that any EA will open a transaction on the new Renko Brick.
And, I can not see what's actually going on on your chart.

What I can do is show you that it's working as desired:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-12-03_171050.jpg Size: 121 KB

It's opening trades and reversing on every signal.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-12-03_171618.jpg Size: 128 KB

Attached Image (click to enlarge)
Click to Enlarge Name: 2024-12-03_173539.jpg Size: 138 KB
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Does this perhaps stop the EA from trading on M1?
I have switched over to M1-chart.
Hercs
Attached Image(s) (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 4 KB
Click to Enlarge Name: screenshot.png Size: 21 KB
Hercs
Quoting Hercs
Does this perhaps stop the EA from trading on M1? I have switched over to M1-chart. Hercs {image} {image}
No, this is just a control log message coming from the indicator once per new Bar.
When the signal appears on Bar[1] there should be a specific price value for the signal.

BTW, I can't test it on BTCUSD M1 because my spread is really too wide.

PS. I will be doing tests on Renko, but it will be in terms more like 1-2 trades per day, so it will take a lot of time.

PPS. Though, in reality, I don't see this as any potential to make profit by EA trading!
The indicator may be of some use, if the trader can filter out many signals.
But, if we let the EA trade like a robot, I don't see how it could make more than it loses...
WoodenCoderBestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} No, this is just a control log message coming from the indicator once per new Bar. When the signal appears on Bar[1] there should be a specific price value for the signal. BTW, I can't test it on BTCUSD M1 because my spread is really too wide. PS. I will be doing tests on Renko, but it will be in terms more like 1-2 trades per day, so it will take a lot of time. PPS. Though, in reality, I don't see this as any potential to make profit by EA trading! The indicator may be of some use, if the trader can filter out many signals. But, if we let...
====
I agree with your sentiments, BT.
Rather disappointing.
If it could help me make better entries, I can always manually trade the day.
Thank you for helping me to see and understand it.
Pleasant evening; see you in the morning, DV.
Hercs.
Hercs
98 traders viewing now, 10 are members:
Olu
,
saeidnaseri
,
vaczak
,
,
loki177
,
overvloed2
,
oo7rai
,
aspiring91
,
alexforexsan
,
Jonhathan123