I will code your EAs and Indicators for no charge | Page 3447 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #68,921
  • May 29, 2024 12:30pm May 29, 2024 12:30pm
Quoting BestTraderEv
{quote} {file}
i have tested it on my mt5 its not executing properly after been converted pls help me out. i just need the market to close all my open trades instanteneously once a specified take profit target is reached'' om mt5
thanks bestraderver for the swift response ...i am gratefull over hear
  • #68,922
  • May 29, 2024 12:50pm May 29, 2024 12:50pm
Quoting BestTraderEv
{quote} {file}
PLS bestraderever forgive my negligence, i sent the wrong file for you to convert.
i am so sorry
pls this is the correct file below.
thanks master
Attached File(s)
File Type: mq4 Close all positions at profit target v1.1.mq4   8 KB | 357 downloads
  • #68,923
  • May 29, 2024 12:52pm May 29, 2024 12:52pm
Quoting walvekarraje
Hi BestTraderEV, i am using gann hi low activator in my system for identifying precise entry candles. i used chatgpt to draw vertical lines at the change of trend. i was able to get what i exactly wanted from chatgpt after hours of work. but i think it is slowing my system when applied to multiple charts ( i have only 9 charts open) can you please have a look at the code and rectify if required ? attached is the original code and the chatgpt code and my chart.{file} {file} {image} many thanks in advance .
Looking at your image, I suspect that it's not this indicator which is causing the problem.
This indicator was only the drop which spilled the water from the cup.
I don't see any issue with this indicator, except that the lines were plotted one index to the right, so not exactly where they should be.
I corrected that.
Otherwise, it's a perfectly normal indicator.

Attached File(s)
File Type: mq4 Gann High-Low activator Vlines.mq4   11 KB | 462 downloads

Attached Image (click to enlarge)
Click to Enlarge Name: 2024-05-29_195827.jpg Size: 262 KB
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,924
  • Edited 1:06pm May 29, 2024 12:54pm | Edited 1:06pm
Quoting mavel0001
{quote} i have tested it on my mt5 its not executing properly after been converted pls help me out. i just need the market to close all my open trades instanteneously once a specified take profit target is reached'' om mt5 thanks bestraderver for the swift response ...i am gratefull over hear
It is not possible to close all positions instanteneously.
Positions are closed one-by-one, always, and when ticks come in.
That's how this system works.
The code is a very simple and basic one - there is no mistake.

And, if you didn't know - EA does not open or close positions.
EA sends requests to the broker's server.
The broker's server fills the requests, or not, depending on many factors which are independent of what we want, or what the EA does.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,925
  • May 29, 2024 1:00pm May 29, 2024 1:00pm
Quoting BestTraderEv
{quote} It is not possible to close all positions instanteneously. Positions are closed one-by-one, always, and when ticks come in. That's how this system works.
yes i know. and i am so sorry.... i sent the wrong version of the EA. thats were the problem is coming from.
thanks big boss for the swift response!!
this is the correct version below
Attached File(s)
File Type: mq4 Close all positions at profit target v1.1.mq4   8 KB | 358 downloads
  • #68,926
  • May 29, 2024 1:01pm May 29, 2024 1:01pm
Quoting walvekarraje
Hi BestTraderEV, i am using gann hi low activator in my system for identifying precise entry candles. i used chatgpt to draw vertical lines at the change of trend. i was able to get what i exactly wanted from chatgpt after hours of work. but i think it is slowing my system when applied to multiple charts ( i have only 9 charts open) can you please have a look at the code and rectify if required ? attached is the original code and the chatgpt code and my chart.{file} {file} {image} many thanks in advance .
Hi,
Interesting thing about ChatGPT. I have been using his services for some time now, for very simple things. Sometimes simple solutions turn out to be the most effective. Maybe this will help you too (I believe it will). When you feel your terminal slowing down, limit the number of candles on which the indicator is displayed. I asked ChatGPT to limit the number of candles. He did it in a few seconds. Look. Maybe you'll find it useful. Indicators attached.
Attached File(s)
File Type: mq4 Gann High-Low activator Vlines.mq4   21 KB | 422 downloads
File Type: mq4 Gann High-Low activator.mq4   7 KB | 416 downloads
  • #68,927
  • Edited 1:28pm May 29, 2024 1:12pm | Edited 1:28pm
Quoting FX88FX
{quote} Hi, Interesting thing about ChatGPT. I have been using his services for some time now, for very simple things. Sometimes simple solutions turn out to be the most effective. Maybe this will help you too (I believe it will). When you feel your terminal slowing down, limit the number of candles on which the indicator is displayed. I asked ChatGPT to limit the number of candles. He did it in a few seconds. Look. Maybe you'll find it useful. Indicators attached. {file} {file}
Just make this little change:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-05-29_201105.jpg Size: 27 KB
If you want to limit the number of lines plotted, you need to change the Bars - 1 to some specific value.
Example:
Inserted Code
if (i < 1000)
This value can be taken from inputs, too.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,928
  • May 29, 2024 1:13pm May 29, 2024 1:13pm
Quoting mavel0001
{quote} PLS bestraderever forgive my negligence, i sent the wrong file for you to convert. i am so sorry pls this is the correct file below. thanks master {file}
You don't need to post versions of the same thing.
I don't need to convert such simple stuff.
I simply code the idea in MQL5.

You need to understand how this whole thing works, first!
You can't get what you want!
If you want instanteneous execution, you need to hire your own server on an exchange, and office space there, too.

Quoting mavel0001
{quote} yes i know. and i am so sorry.... i sent the wrong version of the EA. thats were the problem is coming from. thanks big boss for the swift response!! this is the correct version below {file}
And no, that's not where the problem is coming from!
What you posted is an EA that does other things, too, not only closes at profit.
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,929
  • May 29, 2024 1:26pm May 29, 2024 1:26pm
Quoting BestTraderEv
{quote} You don't need to post versions of the same thing. I don't need to convert such simple stuff. I simply code the idea in MQL5. You need to understand how this whole thing works, first! You can't get what you want! If you want instanteneous execution, you need to hire your own server on an exchange, and office space there, too. {quote} And no, that's not where the problem is coming from!
i know its not like it most close in that exact amount define but the slippage gap most be considerable its not like its even a spiky market.
All am saying is that the time limit it took to execute is too wide..the slippage gap is way too much..that why i suggested something was wrong with the code. that is why i sent you the second version of the indicator.
thanks master
  • #68,930
  • Edited 1:50pm May 29, 2024 1:30pm | Edited 1:50pm
Quoting BestTraderEv
{quote} This indicator was only the drop which spilled the water from the cup.
Many many thanks for quick reply and rectification. i think i understand the sarcasm in "This indicator was only the drop which spilled the water from the cup."


Just checked. the lines plotting is also correct in chatgpt indicator
  • #68,931
  • Edited 1:44pm May 29, 2024 1:32pm | Edited 1:44pm
Quoting mavel0001
{quote} i know its not like it most close in that exact amount define but the slippage gap most be considerable its not like its even a spiky market. All am saying is that the time limit it took to execute is too wide..the slippage gap is way too much..that why i suggested something was wrong with the code. that is why i sent you the second version of the indicator. thanks master
Slippage is also something we can not control - unless your broker gives you such a mechanism.
Even if your broker gives you such a mechanism, it can only protect you from entering, but not from exiting positions.
The Slippage parameter does absolutely nothing.
In the code the Slippage is set to 5 points, but in all my years of trading I have never seen this to do anything.

You really need to learn what you are dealing with!!!
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,932
  • May 29, 2024 1:32pm May 29, 2024 1:32pm
Quoting FX88FX
{quote} Sometimes simple solutions turn out to be the most effective. Maybe this will help you too (I believe it will). When you feel your terminal slowing down, limit the number of candles on which the indicator is displayed.
i agree with you. thank you . i will follow your advice
  • #68,933
  • May 29, 2024 1:38pm May 29, 2024 1:38pm
Quoting BestTraderEv
{quote} {image} {file}
Great job buddy. thanks a lot.
  • #68,934
  • May 29, 2024 2:03pm May 29, 2024 2:03pm
Quoting walvekarraje
{quote} Many many thanks for quick reply and rectification. i think i understand the sarcasm in "This indicator was only the drop which spilled the water from the cup." Just checked. the lines plotting is also correct in chatgpt indicator
It wasn't correct on my charts.
I applied both indicators you posted.
The difference is in the default values.
The original has Lb = 10, and the GPT one has Lb = 9.
So, if we want it to be consistent with the original, Lb must also be 10 in the GPT one, and
then by overlaying the lines onto the original, they must match exactly.
And if you read the code for the trend is established by MA's of index i+1.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-05-29_210255.jpg Size: 104 KB

Hope you understand?
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,935
  • May 29, 2024 2:21pm May 29, 2024 2:21pm
Quoting BestTraderEv
{quote} Just make this little change: {image}If you want to limit the number of lines plotted, you need to change the Bars - 1 to some specific value. Example: if (i < 1000) This value can be taken from inputs, too.
Every lesson and tip is very valuable.
Thank you very much <3
  • #68,936
  • Edited 6:02pm May 29, 2024 5:50pm | Edited 6:02pm
Quoting mavel0001
{quote} i know its not like it most close in that exact amount define but the slippage gap most be considerable its not like its even a spiky market. All am saying is that the time limit it took to execute is too wide..the slippage gap is way too much..that why i suggested something was wrong with the code. that is why i sent you the second version of the indicator. thanks master
OK, so, if You wanna be smart, let's be smart!
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-05-30_004256.jpg Size: 35 KB

I transfered all the possible trade parameters for MQL5 execution to input parameters.
Now, it's your job to figure out which of those are allowed by your broker.
And you can test if that makes any difference.
Attached File(s)
File Type: mq5 [email protected]   6 KB | 429 downloads
.ex4/.ex5 files can't be fixed or modified / I'm not a coder!
  • #68,937
  • Edited May 30, 2024 5:59pm May 29, 2024 7:26pm | Edited May 30, 2024 5:59pm
Quoting romotly007
{quote} I have this multi pair scanner indicators on the link you posted but none of them has the ARROW alert I am looking for. This weeklypivotonly indicator is based on the Woodie pivot and I just need an ARROW alert to appear when price crosses or closed above/below the pivot line when set to true/false. I mean those type of ARROW alert you have on price MA cross alert like this one below. There is no ARROW alert on any pivotonly indicator on the internet and this would be the first if coded. Please, if you can help me out on this, I will be...
I have removed the indicator as it appears the Alerts are not working correctly. I will post an update when I get around to having another look at it.
Trade what you see not what you hope
  • #68,938
  • May 29, 2024 9:16pm May 29, 2024 9:16pm
Quoting BestTraderEv
{quote} It wasn't correct on my charts. I applied both indicators you posted. The difference is in the default values. The original has Lb = 10, and the GPT one has Lb = 9. So, if we want it to be consistent with the original, Lb must also be 10 in the GPT one, and then by overlaying the lines onto the original, they must match exactly. And if you read the code for the trend is established by MA's of index i+1. {image} Hope you understand?
i dont understand the coding part but i do underststand what you mean by that.
i have kept Lb=9 because it corelates optimaly with the guppy method which i am implementig since many years. still experementing on the settings but i am trying to sort out high probablity entries. i know that gann hi low 9 is same as using ema 9 or 10, only gann makes easier visual identification of entry candles.
Lastly your comments in this forum are always very informative and i do follow you regularly.
thanks again.
  • #68,939
  • Edited 11:00pm May 29, 2024 9:59pm | Edited 11:00pm
Quoting cja
{quote} Updated
Quoting BestTraderEv
{quote} OK
Hi, bros. Can you help me to put a percent ProfitTarget and a percent StopTarget on this code? To close all open orders, pending too, stop new orders and remove the ea from the chart when it reaches the ProfitTarget or the StopTarget.

I tried everything, but it seems some error with the "void OnTick" function. When I put this function on the code, the EA simple dont works, dont make orders. I cannot could resolve.

Thanks.
Attached File(s)
File Type: mq4 RF.mq4   20 KB | 360 downloads
  • #68,940
  • May 29, 2024 10:33pm May 29, 2024 10:33pm
Quoting Rey007
Can You Please add a breadcrumb trail to this indicator before the close of the candle? A dash is fine. {file}
Can You Please make this a non-repainting indicator.
Attached File(s)
File Type: ex4 target-bands-indicator.ex4   29 KB | 322 downloads
File Type: mq4 target-bands-indicator.mq4   10 KB | 363 downloads
372 traders viewing now, 3 are registered:
ElVenso
,
kofix11
,
BestTraderEv