I will code your EAs and Indicators for no charge

[quote=hatwahes;14811419]
Is this is the one you are looking for?

am so grateful I will test and share feedback

The indicator that you posted wasn't working, it wasn't refreshing.
This means that alerts wouldn't work, either.
I had to do some work on this to make it work properly.


Do not change the file name!

Even better:

Sorry, however this indicator was decompiled, so I don't work with such...

Thank you very much ... I really appreciate the help.

Most likely there is. However, this type of TS is usually programmed into a specific EA, not as a separate code, so not likely we will easily find one.

This is a script, not EA.
A button will not be of any use, because the script just sends as many Buy Positons requests as specified, and that's all it does.
A button can be usefull in an EA, not in a script like this one.

That's called Trailing Stop.
You will find one here:
https://www.earnforex.com/metatrader...top-on-Profit/

[quote=trajanr;14811966] YES ..... YES

Hello

Please can someone help code my strategy into an EA compatible on MT5 for micro lots.

Parameters:

Simple moving average period
Lot size
No. of positions to open

Buy criteria:
Open buy positions when candle closes above inputed moving average period and close trade when price closes below moving average period.

Sell criteria
Open sell position when candle closes below inputed moving average period and close trade when price closes above moving average period.

Yes ..you are right...but if it will be possible.....
but having it directly on the chart would be convenient.....in any case thanks for everything you do and thanks for converting the other indicator

hi all .. i want to use password to file... so i used this command.. it shows outside to get input.. but with out input how to use this command means the password not shown in window...

input string Password;

can you convert my ea mql4 to mql5?

Pine Script indicatorVolatility Adjusted Grid [Gann]

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// @fareidzulkifli
// @version=4

study("Volatility Adjusted Grid [Gann]", shorttitle = "Volatility Adjusted Grid", overlay = true, precision=4)

//-----------------------
// Parameter
//-----------------------
source = close
group = "Style"
typ1 = "Solid", typ2 = "Dashed", typ3 = "Dotted"
ext1 = "Left", ext2 = "None"
alert1 = "Once per Bar", alert2 = "Once per Bar Close"

maxline = input(15, title = "No. of S&R Lines", minval=1, maxval=20, tooltip = "No. of each S & R\n20 means 20 Resistance and 20 Support")
atr_size = input(1.5, title = "Range Size", minval=.1, maxval=10., step=0.1, tooltip = "Smaller Number indicates tighter range\nMin Val=0.1\nMax Val = 10.0")
disp_rguide = input(true, title = "Range Guide", tooltip = "Display Range Size guide to find next bigger/smaller range at bottom left of the chart")
in_ext = input(ext1, title = "Line Extension", group = group, options=[ext1, ext2])
c_style = input(typ1, title = "Cardinal Cross Style", group = group, options=[typ1, typ2, typ3])
o_style = input(typ3, title = "Ordinal Cross Style", group = group, options=[typ1, typ2, typ3])
g_col = input(color.new(#606060, 35), title = "Line Color", group = group)
alert_typ = input(alert2, title = "Alert Frequency", group = "Alert", options=[alert1, alert2])

//-----------------------
var cardinal = c_style == typ1 ? line.style_solid : c_style == typ2 ? line.style_dashed : line.style_dotted
var ordinal = o_style == typ1 ? line.style_solid : o_style == typ2 ? line.style_dashed : line.style_dotted
var ext_type = in_ext == ext1 ? extend.left : extend.none

//-----------------------
// Generate Gann Square of 9 Sequence
//-----------------------
var table_size = 1200
var gann_table = array.new_float()
var val = 1
var increment = 1
var diag_check = 3

if(barstate.isfirst)
array.push(gann_table, 1)

for cnt = 0 to table_size-1
val := val+increment
array.push(gann_table, val)

if(val==pow(diag_check,2))
increment += 1
diag_check += 2

//-----------------------
// Funtions
//-----------------------
get_mult(_val, adj)=>
float initial = 0.00001
float res = initial
float check = na

int cnt_run = 0
for i = 0 to 12
check := adj * (initial * pow(10., i))
cnt_run := cnt_run+1
if(_val < check)
res := 100.0/(initial * pow(10., i))
break

[res, cnt_run]

get_idx(_src)=>
int idx = array.indexof(gann_table, _src)
float tmp = 0
int res = na, int r_idx = na, int s_idx = na

// if src==gann
if(idx!=-1)
r_idx := idx+1

// if src != gann
if(idx==-1)
for cnt = 0 to (array.size(gann_table)-1)

tmp := array.get(gann_table, cnt)
if(tmp>_src and not r_idx)
r_idx := cnt
if(r_idx)
break

res := r_idx

f_line(_yloc, _idx)=>
line.new(
x1 = bar_index-50, x2 = bar_index+10, xloc=xloc.bar_index,
y1 = _yloc, y2 = _yloc,
style = _idx%2==1 ? cardinal : ordinal,
extend = ext_type,
color = g_col)

f_label(_txt, _yloc) =>
label.new(
x = bar_index+10, xloc = xloc.bar_index,
y = _yloc,
text = _txt,
color = #00000000,
textcolor = g_col,
size = size.normal,
style = label.style_label_left,
textalign = text.align_left)

//-----------------------
// Main Calculation
//-----------------------
varip int r_loc = na // Keep index of SnR levels array
varip int s_loc = na
varip float r1 = na // Temporary placeholder to check the range size
varip float s1 = na
varip r_list = array.new_float() // Array to keep SnR level intrabar //workaround as varip cant be use with line array
varip s_list = array.new_float()
var g_line = array.new_line() // Array for drawing SnR Lines
var g_lbl = array.new_label() // Array for drawing SnR Price Labels
varip float curr_size = na
varip float prev_size = na
varip int run_num = 0 // Keep track no of execution of main calculation since it may go up to 1000+ iterations per run
varip int count_run = 0 // Keep track no of execution of main calculation since it may go up to 1000+ iterations per run

//-----------------------
float atr = sma(tr, 30)
int lookback = max(min(bar_index, 20), 1)
float range = na
float range2 = (highest(high, lookback) - lowest(low, lookback)) // Alternative when atr not available
float mult = na
float src = na
float min_range = atr[1] * atr_size

//-----------------------
if(barstate.isnew) // reset on newbar
run_num := 0
count_run := 0
r_loc := na, r1 := na
s_loc := na, s1 := na
curr_size := na
prev_size := na
array.clear(r_list)
array.clear(s_list)

if(barstate.islast and run_num == 0)
run_num += 1

for i = 0.0 to 4.5 by 0.5 //10 iterations max
for j = 1 to 10 //10 iterations max
range := atr * (j*3)
[_mul,_run] = get_mult(nz(range, range2), (5-i)) //12 iterations max
mult := _mul
src := floor(source*mult)

r_loc := get_idx(src)
s_loc := r_loc-1
r1 := round_to_mintick(array.get(gann_table, r_loc)/mult)
s1 := round_to_mintick(array.get(gann_table, s_loc)/mult)
count_run := count_run + 1 //+ _run
curr_size := r1-s1

if(curr_size >= min_range) //break loop if found
break

prev_size := curr_size

if(curr_size >= min_range) //break loop if found
break

for i=0 to maxline-1
float r_val = r_loc + i < 0 or r_loc + i > table_size-1 ? na : round_to_mintick(array.get(gann_table, r_loc + i)/mult)
float s_val = s_loc - i < 0 or s_loc - i > table_size-1 ? na : round_to_mintick(array.get(gann_table, s_loc - i)/mult)

if(r_val)
array.push(r_list, r_val)

if(s_val)
array.push(s_list, s_val)

//-----------------------
// S/R Drawing
//-----------------------
float _temp = na
int r_size = array.size(r_list)
int s_size = array.size(s_list)

if(barstate.islast)
if(array.size(g_line) > 0)
for z = 0 to array.size(g_line)-1
oldline = array.shift(g_line)
line.delete(oldline)

if(array.size(g_lbl) > 0)
for z = 0 to array.size(g_lbl)-1
oldlbl = array.shift(g_lbl)
label.delete(oldlbl)

if(r_size>0)
for i=0 to r_size-1
_temp := array.get(r_list, i)
array.push(g_line, f_line(_temp, r_loc+i))
array.push(g_lbl, f_label("("+tostring(_temp, format.mintick)+")", _temp))

if(s_size>0)
for i=0 to s_size-1
_temp := array.get(s_list, i)
array.push(g_line, f_line(_temp, s_loc-i))
array.push(g_lbl, f_label("("+tostring(_temp, format.mintick)+")", _temp))

//-----------------------
// Alert
//-----------------------

alertup = (crossover(close, r1) or (close[1] < close and close==r1))
alertdn = (crossunder(close, s1) or (close[1] > close and close==s1))

string alerttxt = na

if(alertup)
alerttxt :="Cross Above "+ tostring(r1, format.mintick)
if(alertdn)
alerttxt :="Cross Below " + tostring(s1, format.mintick)

var alert_freq = alert_typ==alert1 ? alert.freq_once_per_bar : alert.freq_once_per_bar_close

if(alertup or alertdn)
alert(alerttxt, alert_freq)

//-----------------------
// Table for Range Guideline
//-----------------------
var PTable = table.new(position = position.bottom_left, columns = 2, rows = 2)
prv_range = prev_size/atr[1] > 0.1 ? tostring(prev_size/atr[1], "0.00") : "Not Available"
nxt_range = curr_size/atr[1] < 10 and count_run < 80 ? tostring(curr_size/atr[1], "0.00") : "Not Available"

if(barstate.islast and disp_rguide)
table.cell(PTable, 0, 0, text="Previous Range: ", text_color=g_col, text_halign=text.align_left, text_size=size.small)
table.cell(PTable, 1, 0, text="< " + prv_range, text_color=g_col, text_halign=text.align_left, text_size=size.small)
table.cell(PTable, 0, 1, text="Next Range: ", text_color=g_col, text_halign=text.align_left, text_size=size.small)
table.cell(PTable, 1, 1, text="> " + nxt_range, text_color=g_col, text_halign=text.align_left, text_size=size.small)






please make mt4 indicator
trading view content

Hello. Please add a vertical line to the signal bar designation in indicator 0 - MA-Crossover_Alert.mq5 as in the picture. During subsequent triggering, the line migrates. That is, the line is the same and always on the last arrow. This is needed to automatically evaluate the bar using the basement volume indicator. Is it possible to do this?

Hi, I'd like to take you up on this offer and ask that you can make an EA to open / closed positions based on the TDI and sloping stoch indicatorsfor MT4. Is this something you would be keen to do?

Thank you for the reply Sir,

I am looking for a trailing SL EA something like this (in attachment), but trailing in "Money" not by Pip/points.
( https://www.forexfactory.com/thread/...23#post4415623 )

[quote=trajanr;14811966] Dear Master (trajanr) ,
Did you receive my feedback ?

I said "Yes" , ... this is the Binary Code Indicator.

Best regards.