Menu
Sister Sites

Options

Bookmark Thread

First Page First Unread Last Page Last Post

Print Thread

Similar Threads

I will code your pivot EAs for no charge 25 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

Quoting BestTraderEv
{quote} They keep changing because you are adding them in a loop. You aren't updating them on every new bar, you are constantly adding them.
Could you please help to correct my codes so that all the 6 TFs would have respective correct values in the buffet ? Highly appreciated
Quoting chimoong
{quote} Could you please help to correct my codes so that all the 6 TFs would have respective correct values in the buffet ? Highly appreciated
Nah, you need to get through this on your own.
You already have enough experience, and you've already come a long way.
So, if you get this on your own, you won't ask for help any more.
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
Good Day Great Coders.

Blessing to any developer who can help me make this indicator MTF (Multi-Timeframe).

The indicator is so good that one can adopt a layered approach to ensure accurate entry on smaller timeframe as shown in the picture below.

Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 19 KB


E.g. You can get a signal on a higher timeframe (e.g. M5) and use the exact repeat of the same indicator as entry on a smaller TF (e.g. M1)

I have taken a godly amount of time to back test it and I can assure it's not a waste of time.

I pray someone here be able to help with the MTF problem....

Will really appreciate and if there's anyone here who wants to make it into a complete system, i will gladly share the strategy in details....

Thanks in anticipation.

Attached File(s)
File Type: mq5 Predict.mq5   16 KB | 227 downloads
Live and Let Live
Good evening,
I was wondering if there was a way to adjust the # of trades to have the ability to make the final number around 80 as I want to have finer control over the lot sizing.

For example, being able to change the first selection from Trade 1-12 to say 1-20 and then Trades 21-30, Trades 31-40, etc.
Attached Image (click to enlarge)
Click to Enlarge Name: screenshot.png Size: 3 KB
Attached File(s)
File Type: ex4 Quantum London Trading EA v1.6.1.ex4   69 KB | 177 downloads
File Type: mq4 Quantum London Trading EA v1.6.1.mq4   49 KB | 200 downloads
Remember, the market never lies. It is only we who lie to ourselves.
Could anyone be so kind to convert this MT4 indi to MT5? It looks such a simple sub chart line indicator, so I tried by myself but was not successful. Thanks in advance!
Attached File(s)
File Type: mq4 sayabarcrossview.mq4   2 KB | 226 downloads
Quoting jeanlouie
{quote} Your pic doesn't show the chart candles, those look like heiken ashi candles, and the chart candles/bars/line, if present, can't be seen, the chart symbol can't be seen either to see if it's a regular live chart or an offline chart doing something uncommon. Does the issue persist on an empty normal live chart? Anyhow I can't replicate the issue on a live chart. The gif below is in the tester and it runs as expected as well as on a live 1min chart, the only way to kind-of replicate the issue is to run it in the tester with open prices only,...
I use synergy candles to reduce chart noise. the indicator recognizes mt4 candles and not this indicator. If you tested it and it's working, I have to check what problem I have here. It could be another indicator that is causing a conflict or even some configuration of my mt4.
Hi BestTraderEv,

I hope all is well with you.

I have a question & a request. Is there an Semafor indicator that is a true NRP? I have tried 3 that say NPR, but when observed on a1Min. time frame they constantly repaint. I have on a 15M chart marked with arrows the highs lows printed by the Semafor & again even after going for several candle past Semafor signals there is repainting. Once the candles close there should be no more repainting or recalculating occurring? Is that correct?

My request is for one of the Semafor indicators to be coded as such that there is no longer repainting once the candle has closed. If you think this is worthwhile idea & you have an interest in coding this, I will post a Semafor indicator for you to work with. If you deem this as not a good idea worth the time & effort I totally understand & will respect your views.

Thank you for kindly sharing your skills with the trading community.
Quoting BestTraderEv
{quote} Nah, you need to get through this on your own. You already have enough experience, and you've already come a long way. So, if you get this on your own, you won't ask for help any more.
Let me re-think again the logic of my loop. Thanks
Quoting chimoong
{quote} Let me re-think again the logic of my loop. Thanks
What is 5+=10 ? (this is just to represent a value for a variable at a given loop cycle)
Now, if we loop that, what do we get?
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} What is 5+=10 ? (this is just to represent a value for a variable at a given loop cycle) Now, if we loop that, what do we get?
Of course, keep on adding 10.
Quoting siglot
Good Day Great Coders. Blessing to any developer who can help me make this indicator MTF (Multi-Timeframe). The indicator is so good that one can adopt a layered approach to ensure accurate entry on smaller timeframe as shown in the picture below. {image} E.g. You can get a signal on a higher timeframe (e.g. M5) and use the exact repeat of the same indicator as entry on a smaller TF (e.g. M1) I have taken a godly amount of time to back test it and I can assure it's not a waste of time. I pray someone here be able to help with the MTF problem.......
I don't know what you're seeing, but I'm seeing total nonsense.
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-03-09_131823.jpg Size: 209 KB

You cherry-picked some individual situation - that's what it looks like to me.
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting romulorios
{quote} I use synergy candles to reduce chart noise. the indicator recognizes mt4 candles and not this indicator. If you tested it and it's working, I have to check what problem I have here. It could be another indicator that is causing a conflict or even some configuration of my mt4.
Would be nice if you could check the logs (Experts tab in Terminal window) for errors like "array out of range" or "zero divide".
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting acetrader
Hi BestTraderEv, I hope all is well with you. I have a question & a request. Is there an Semafor indicator that is a true NRP? I have tried 3 that say NPR, but when observed on a1Min. time frame they constantly repaint. I have on a 15M chart marked with arrows the highs lows printed by the Semafor & again even after going for several candle past Semafor signals there is repainting. Once the candles close there should be no more repainting or recalculating occurring? Is that correct? My request is for one of the Semafor indicators to be coded as...
They're not repainting - they are appearing and disappearing.
They appear when conditions are met, and disappear when the conditions are gone.
Also, if they are rejected before a certain number of candles is closed, they disappear.
We can't code a true NRP indicator unless we just leave all the signals which ever appeared, and we will get a big mess.
The idea is for the signal to be somehow confirmed by the Price Action before it becomes a viable signal.
If the trader wants to react to every signal without paying attention to the Price Action patterns, they will get a lot of Stop Losses.

Here is a good example:
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-03-09_134227.jpg Size: 279 KB

The Semafor is showing a Bullish Signal.
What does that mean?
It means - watch out for POTENTIAL reversal.
It does not mean that we should already trade Long.
Unless we have a good reason to trade Long!
But, can we see any significant Bull Power???
Attached Image (click to enlarge)
Click to Enlarge Name: 2024-03-09_134816.jpg Size: 376 KB


You see, the Trader must be smarter than the indicator.
If the indicator is smarter than the Trader, nothing good can come out of such a situation.
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} They're not repainting - they are appearing and disappearing. They appear when conditions are met, and disappear when the conditions are gone. Also, if they are rejected before a certain number of candles is closed, they disappear. We can't code a true NRP indicator unless we just leave all the signals which ever appeared, and we will get a big mess. The idea is for the signal to be somehow confirmed by the Price Action before it becomes a viable signal. If the trader wants to react to every signal without paying attention to the Price Action...
Hi BestyTraderEv,

Now I have a solid understanding of what Semafor is doing from your explanation. Again, your clear logic & explaining of that logic makes perfect sense. Thank you again, for all you do for the trading community.
hi im new to this thread

is it possible to draw circles instead of trendlines

ive tried and tried but only received errors in this
please help
Attached File(s)
File Type: mq4 HtfHiLoMe-edition (1).mq4   12 KB | 198 downloads
jeanlouie could you give an alert to this fractal indicator?
Hi great coder,
How can we code a modified exponential MA ? let's say i want to calculate an EMA of last 6, bars but using our define PA, instead of default close price. example: i want to use (open+high+low+close+close)/ 5 or just (open+close)/2... how can i code it ? any clue ? Thank you in advance for your help
don't worry! ,but be happy...
Quoting Hknmatata
Hi great coder, How can we code a modified exponential MA ? let's say i want to calculate an EMA of last 6, bars but using our define PA, instead of default close price. example: i want to use (open+high+low+close+close)/ 5 or just (open+close)/2... how can i code it ? any clue ? Thank you in advance for your help
Attached File(s)
File Type: mq4 AllAverages v4.9.mq4   79 KB | 202 downloads

And another one:
Attached File(s)
File Type: ex4 averages - mtf - alerts 8.9.ex4   150 KB | 205 downloads
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
Quoting BestTraderEv
{quote} Would be nice if you could check the logs (Experts tab in Terminal window) for errors like "array out of range" or "zero divide".
BestTraderEv, I checked where you indicated and it does not show these errors reported by you. I noticed that it updates one signal or another, but when I update the tamplate it shows other signals. I wanted it to work well, because it is very useful in my operations.
Quoting romulorios
{quote} BestTraderEv, I checked where you indicated and it does not show these errors reported by you. I noticed that it updates one signal or another, but when I update the tamplate it shows other signals. I wanted it to work well, because it is very useful in my operations.
Can't do anything without the source code...
Try switching between timeframes after applying a template.
But, you know, this is an indicator by jeanlouie, and he knows what he is doing, so I doubt that he coded anything incorrectly.
Wooden Coder BestTraderEv (.ex4/.ex5 files cannot be fixed)
44 traders viewing now, 3 are members:
petro_gr81
,
BestTraderEv
,
Godwin Igili