I will code your EAs and Indicators for no charge

Can anyone help me convert this MT4 indicator to MT5, Shortcut key to switch period


#property description "The indicator will change the timeframe of the chart with key press"
#property description "1 55- Daily, 2 54- 4Hr, 3 53- 1Hr, 4 52- 30Mins, 5 51- 15Mins, 6 50- 5Mins, 7 49-Mins, 48- CHARTFIX P 80- Hide "
#define KEY_DAILY 55
#define KEY_4HOUR 54
#define KEY_1HOUR 53
#define KEY_30MIN 52
#define KEY_15MIN 51
#define KEY_5MIN 50
#define KEY_1MIN 49
#define KEY_CHARTFIX 48
#define KEY_P 80
input bool showInfo=false;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int OnInit()
{
//---
return(INIT_SUCCEEDED);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
const int prev_calculated,
const datetime &time[],
const double &open[],
const double &high[],
const double &low[],
const double &close[],
const long &tick_volume[],
const long &volume[],
const int &spread[])
{
if(showInfo==true)
{
ObjectCreate("Hotkey Obj1",OBJ_LABEL,0,0,0);
ObjectSetText("Hotkey Obj1",Symbol()+"-"+IntegerToString(Period())+" Min",12,"Calibri",DodgerBlue);
ObjectSet("Hotkey Obj1",OBJPROP_CORNER,0);
ObjectSet("Hotkey Obj1",OBJPROP_XDISTANCE,15);
ObjectSet("Hotkey Obj1",OBJPROP_YDISTANCE,10);
ObjectCreate("Hotkey Obj2",OBJ_LABEL,0,0,0);
ObjectSetText("Hotkey Obj2","Ask:"+DoubleToStr(Ask),8,"Verdana",Red);
ObjectSet("Hotkey Obj2",OBJPROP_CORNER,0);
ObjectSet("Hotkey Obj2",OBJPROP_XDISTANCE,15);
ObjectSet("Hotkey Obj2",OBJPROP_YDISTANCE,30);
ObjectCreate("Hotkey Obj3",OBJ_LABEL,0,0,0);
ObjectSetText("Hotkey Obj3","Bid:"+DoubleToStr(Bid),8,"Verdana",Green);
ObjectSet("Hotkey Obj3",OBJPROP_CORNER,0);
ObjectSet("Hotkey Obj3",OBJPROP_XDISTANCE,15);
ObjectSet("Hotkey Obj3",OBJPROP_YDISTANCE,40);
ObjectCreate("Hotkey Obj4",OBJ_LABEL,0,0,0);
ObjectSetText("Hotkey Obj4","Spread:"+DoubleToStr(NormalizeDouble((Ask-Bid),5)),8,"Verdana",Gray);
ObjectSet("Hotkey Obj4",OBJPROP_CORNER,0);
ObjectSet("Hotkey Obj4",OBJPROP_XDISTANCE,15);
ObjectSet("Hotkey Obj4",OBJPROP_YDISTANCE,50);
}
//--- return value of prev_calculated for next call
return(rates_total);
}
//+------------------------------------------------------------------+
//| ChartEvent function |
//+------------------------------------------------------------------+
void OnChartEvent(const int id,
const long &lparam,
const double &dparam,
const string &sparam)
{
//---
if(id==CHARTEVENT_KEYDOWN)
{
switch(int(lparam))
{
case KEY_DAILY:
ChartSetSymbolPeriod(0,NULL,1440);
break;
case KEY_4HOUR:
ChartSetSymbolPeriod(0,NULL,240);
break;
case KEY_1HOUR:
ChartSetSymbolPeriod(0,NULL,60);
break;
case KEY_30MIN:
ChartSetSymbolPeriod(0,NULL,30);
break;
case KEY_15MIN:
ChartSetSymbolPeriod(0,NULL,15);
break;
case KEY_5MIN:
ChartSetSymbolPeriod(0,NULL,5);
break;
case KEY_1MIN:
ChartSetSymbolPeriod(0,NULL,1);
break;
case KEY_CHARTFIX:
{
bool isFixed=ChartGetInteger(0,CHART_SCALEFIX,true);
if(!isFixed)
{
ChartSetInteger(0,CHART_SCALEFIX,true);
}
else
{
ChartSetInteger(0,CHART_SCALEFIX,false);
}
}
break;
case KEY_P:
{
bool isFixed=ChartGetInteger(0,CHART_SHOW_PRICE_SCALE,true);
if(!isFixed)
{
ChartSetInteger(0,CHART_SHOW_PRICE_SCALE,true);
}
else
{
ChartSetInteger(0,CHART_SHOW_PRICE_SCALE,false);
}
}
break;
}
ChartRedraw();
}
}
//+------------------------------------------------------------------+
int deinit()
{
ObjectsDeleteAll(0,"Hotkey",0,OBJ_LABEL);
return(0);
}
//+------------------------------------------------------------------+

The indicator only has one problem. I want the high and low to be marked on the previous candle and not on the current one.

Can someone help code a mt5 Ea. The logic makes use of sma14 with open value. The Ea works on 30mins chart and opens a buy trade if the last candle is a bullish one and closes above the moving average and the trade closes after expiration of the candle (that is 30 minutes per trade). A new buy is opened at the begging of a new candle if the previous candle was a bullish one and closed above the moving average. If the buy trade loses the Ea waits for the next bullish candle that closes above the moving average and takes a buy trade. The Ea should use the same logic for sell trades too. Note that each trades closes after 30 minutes expiration. Thanks In advance.

take a closer look, the Indicator have the Option to remove current high/ low line

anybody know why this closes a trade as soon as it opens

if ((Time[1] != lastClosedBarTime)

lastClosedBarTime = Time[1];
OrderClose(OrderTicket(), OrderLots(), OrderClosePrice(), Slippage, Red);
}
if (TrailingStop > 0)
{
if ((OrderOpenPrice() - Ask) > (MyPoint * TrailingStop))
{
if ((OrderStopLoss() > (Ask + MyPoint * TrailingStop)) || (OrderStopLoss() == 0))
{
OrderModify(OrderTicket(), OrderOpenPrice(), Ask + MyPoint * TrailingStop, OrderTakeProfit(), 0, Red);
return (0);


isnt this supposed to wait for current bar to END and exit any open trade..

Hi Coders,
Can someone code this indicator to send email and notification alerts?

Thanks in advance.

Unfortunately it is decompiled code so it is unlikely anyone on this Forum will work with it.

Master thank you for the drag and drop script, i tried it in another broker and it worked

Ok, thanks for letting me know.

Can you add a trailing stop to this MT4 indicator? Thanks for your help.

Coders in the house, compliments of the season. please hrlp me to add SIGNAL GAP to this indicator. the arrows are far away from the candles when zoomed in,
Thank you for your time.

master please help review this :

#property strict
datetime lastUpdateTime = 0;
double highArray[];
double lowArray[];
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
int OnInit()
{
ArraySetAsSeries(highArray, true);
ArraySetAsSeries(lowArray, true);
SetIndexBuffer(0, highArray);
SetIndexBuffer(1, lowArray);
SetIndexStyle(0, DRAW_LINE);
SetIndexStyle(1, DRAW_LINE);
SetIndexLabel(0, "High Line");
SetIndexLabel(1, "Low Line");
SetIndexDrawBegin(0, 3); // Start drawing from the fourth bar
SetIndexDrawBegin(1, 3);
return(INIT_SUCCEEDED);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
const int prev_calculated,
const datetime &time[],
const double &open[],
const double &high[],
const double &low[],
const double &close[],
const long &tick_volume[],
const long &volume[],
const int &spread[])
{
if (TimeDayOfYear(time[0]) != TimeDayOfYear(lastUpdateTime))
{
ArraySetAsSeries(highArray, false);
ArraySetAsSeries(lowArray, false);
for (int i = 0; i < 3; i++)
{
highArray[i] = high[i];
lowArray[i] = low[i];
}
ArraySetAsSeries(highArray, true);
ArraySetAsSeries(lowArray, true);
lastUpdateTime = time[0];
}
return(rates_total);
}


trying to run an indicator that connects the high and low of the last 3 candles on a daily tf with a line.

Hi XplosionKibo, just wondering how you are getting on with the new indicator you're coding from scratch?

Hi Coders,
Is it possible to add Xau to this strength meter? I thank you in advance along with seasons greetings to all!

Thanks much!!

hello dear,im travelling at the moment,when i go back home,i will share with you by this saturday,happy holidays

great Indicator from tintep

Good day, can any one please help with this?

Hi Guys
Would it be possible to move the text of this yearly pivot points indicator across more to the left of the chart to get it out of the way of current price and just have the point not the price, like S1, pivot pt etc, thanks.