I will code your EAs and Indicators for no charge

It is look like step stochastic indicator. Google it you will find MQL file.

Dear BestTraderEV,

Good Day sir.

Kindly request your help on this regard.

I trade indices & I'm trying to develop a system accordingly.

I've a request that may sound strange but as per my findings if this can be done it may come in very handy.

This indicator that I've attached is a "Moving average crossover" for MT5..

I wonder whether its possible to add a condition in addition to usual crossover.

Example :

Lets say I want to get alerts when

Moving average 20 (EMA) crossed Moving average 50 (EMA).

But I get to choose only to get alerts when crossover happens below/high 200 MA/EMA


Is this something can be done sir?
if possible kindly help me to get it done. million thanks in advance.

have a good day.
Thank you.

Master please i did not take a screenshot when i saw the faults, but at the moment am checking this version candles_in_subwindow w6MA, nothing comes up faulty yet as of today, am surprised maybe because i re-install the platform i will post as it comes up, thank you Master for your great help always

This doesnt show weekly,it shows monthly open line

Technically, mt5 is faster, I prefer mt4 though. There are 2 ways you can refer to timeprice data, either through predefined arrays available in the parameters of oncalc, ie time[], high[], or with predefined arrays like Time[], High[] (the capital version gets syntax highlighted in mt4, doesn't exist for mt5), or via time series functions like iTime or iOpen, or via CopyRates. The predefined arrays have information for the current chart, and is ready for access, when using iTime/iopen/ihigh/etc you have the option of changing the tf setting and requesting price data from a different timeframe. This data may not exist yet, and has to be downloaded, this is the delay you are seeing, as the mt5 indicator is using mtf timeseries access.

If you compare how the 2 indicators request time data, you will see that the mt4 indicator uses Time[i] which is a predefined array with values ready for access, and the mt5 indicator uses timeseries functions to get time data from another tf, which will have a delay if that data isn't already available. You will also notice that if you reload the mt5 indicator, it will load instantly as the requested data has already be downloaded previously. Note that the same delay would happen in mt4 too, mtf access requires the data to be ready or you wait a second or 2 while it is collected then try again.

Looks like chatgpt, it can't currently make reliable mt4/mt5 codes.

Because that's the values you're giving it to draw to. iMA returns a handle number to the array that holds the ma values, you can see this in the data window when you drag the cursors back and forth the ma line, and you can see it in the oninit() section where mahandle is given a value. In oncalc(), when trying to clear the ma line, in the existing loop, give it emptyvalue instead.

Oh that's why you had the objectcreation bit, had nothing to do with the input section. The object hline is a full chart width horizontal line, there is no time start/end coord for it, only price, replace it with trendline to be able to give it start/end timeprice coords.

BY GRACE OF GOD
RESPECTED TRADER & CODER.
I HAVE ZERO KNOWLEDGE IN CODING
SIMPLIED EVERYTHING IN ACTUAL CAHRT. ONE CAN LOOK AND CODE IT THIS TIME WITHOUT HAVING ANY DOUBT IN IT TO CREATE A TEMPLATE OF INDICATOR.
ATTACHED IS THE CHART. PLEASE LOOK AND READ IT CAREFULLY THE SPECIFICATION HOW SIMPLE IT IS.
MY HUMBLE REQUEST SOMEONE CAN HELP IN THIS FORUM AND CONTRIBUTE TEMPLATE OF INDICATOR TO PUBLIC IN MQL5 FORMAT.
THIS WAY WE CAN BENIFIT TOGETHER ALL OF US.
THANKS & REGARDS

I see, thank you for the explanation. Forgive me if I am wrong, but from what I understand, that means that the main difference between the two script that could possibly explain the performance difference is that one used a predefined array (MT4) with value ready for access... while the other use a timeseries function (MT5), which will require extra process to fetch the value needed as its not readily available.

I think I understood it now. May I know if there is a reason why one would prefer using the timeseries function, as from what I notice in previous experience, the delay is much more significant, although maybe there are some benefit to it (I do notice that once I have loaded it previously, the next time loading that chart, the indicator appears with little to no delay), but the predefined array also appears without any delay.

Also if its possible to code the MT5 indicator to use a predefined array, or is it only possible in MT4?

Thank you for the guidance, I think I know what I needed to research regarding it now.

Thanks jeanlouie,,,
yes i still need help from chatgpt. well it somewhat can be reliable, but I/we have to explain the detail to AI and make manual correction , even for simplest/basic smallest subroutine detail, if not , AI will give wrong code.in my case here, i'll try work with empty value.


It WORKS !
Thanks again jeanloui, this 'EMPTYVALUE' solved this 'limited bars MA' issue.

my next plan is to add function Multi TimeFrame.
I think this method very useful to see 'lower TimeFrame' from 'Higher TF current chart'.

Here is correct code for MA 'limited bars'.

HI
BY GRACE OF GOD
BELOW IS JUST NOW TRADE SETUP FORMED ON 1MIN TF
FOR DETAILED SPECIFICATION OF INDICATOR & TEMPLATE CREATION ONE CAN LOOK AND DISCUSS AT

https://www.forexfactory.com/thread/...9#post14661859

Please coders can it be possible to do a 4hrs expert advisor with the attached settings of the attached arrow signal? ...... ENTRY CANDLE WHERE ARROW APPEARS.. STOP LOSS 10PIPS.... TAKE PROFIT 20PIPS. Please assist.Thanks

There was an error in the code. That's why it took so long to load in the terminal.
Pruebe este indicador.

Hello everyone and thanks for everything you share.
I'm new in this forum. I trade since 3 years (fluctuating results, but I don't give up)
I hope I'm not breaking any rules of this forum with my request.

Would anyone be able to turn a pine-code from TradingView to an MT4 indicator?
The name of indicator is "T3 Gold Sniper RickAtw", for me is a good indicator. My backtest (last month) shows me good result:
all market sessions, rr 1:1.5, timeframe 15m
96 signals
59 OK 61.45%
37 KO 38.54%

if I consider only the London sessions, the result is a little better:
45 signals
29 OK 64.4%
16 KO 35.6%


The code is that:

// This source code is subject to the terms of the Mozilla Public License 2.0 at https://mozilla.org/MPL/2.0/
// RickAtw
//@version=3
study(title="T3 Gold Sniper RickAtw", overlay=true )
typeColoured = input(defval="TMA", title="Coloured MA Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "HullMA", "ZEMA", "TMA", "SSMA"], type=string)
lenColoured = input(defval=18, title="Coloured MA - Length", minval=1)
srcColoured = input(close,title="Coloured MA - Source")
// Fast MA - type, length
typeFast = input(defval="EMA", title="Fast MA Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "HullMA", "ZEMA", "TMA", "SSMA"], type=string)
lenFast = input(defval=21, title="Fast MA - Length", minval=1)
// Medium MA - type, length
typeMedium = input(defval="EMA", title="Medium MA Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "HullMA", "ZEMA", "TMA", "SSMA"], type=string)
lenMedium = input(defval=55, title="Medium MA - Length", minval=1)
// Slow MA - type, length
typeSlow = input(defval="EMA", title="Slow MA Type: ", options=["SMA", "EMA", "WMA", "VWMA", "SMMA", "DEMA", "TEMA", "HullMA", "ZEMA", "TMA", "SSMA"], type=string)
lenSlow = input(defval=89, title="Slow MA Length", minval=1)
// 3xMA source
ma_src = input(close,title="3xMA and Bollinger Source")
//
filterOption = input("SuperTrend+3xMA",title="Signal Filter Option : ",
options=["3xMATrend","SuperTrend","SuperTrend+3xMA","ColouredMA","No Alerts","MACross","MACross+ST","MACross+3xMA",
"OutsideIn:MACross","OutsideIn:MACross+ST","OutsideIn:MACross+3xMA"])
//
hideMALines = input(false)
hideSuperTrend = input(true)
hideTrendDirection = input(true)
//
disableFastMAFilter = input(false)
disableMediumMAFilter = input(false)
disableSlowMAFilter = input(false)
//
uKC = false
oiLength = input(8, title="Bollinger Outside In LookBack")
//
SFactor = input(3.618, minval=1.0, title="SuperTrend Factor")
SPd = input(5, minval=1, title="SuperTrend Length")
//
buyColour_ = input("Green", title="BUY Marker Colour: ",options=["Green","Lime","Aqua","DodgerBlue","Gray","Yellow"])
sellColour_ = input("Maroon",title="SELL Marker Colour: ",options=[ "Maroon","Red","Fuchsia","Blue","Black","Orange"])
uSuperTrendFilter = filterOption == "SuperTrend" ? true : false
u3xMATrendFilter = filterOption == "3xMATrend"? true : false
uBothTrendFilters = filterOption == "SuperTrend+3xMA"? true : false
uOIMACrossFilter = filterOption == "OutsideIn:MACross" ? true : false
uOI3xMAFilter = filterOption == "OutsideIn:MACross+3xMA" ? true : false
uOISTFilter = filterOption == "OutsideIn:MACross+ST" ? true : false
uMACrossFilter = filterOption == "MACross" ? true : false
uMACrossSTFilter = filterOption == "MACross+ST" ? true : false
uMACross3xMAFilter = filterOption == "MACross+3xMA" ? true : false
disable3xMAFilter = disableFastMAFilter and disableMediumMAFilter and disableSlowMAFilter
u3xMATrendFilter := disable3xMAFilter? false : u3xMATrendFilter
disableAllFilters = u3xMATrendFilter or uSuperTrendFilter or uBothTrendFilters or uOI3xMAFilter or uOISTFilter or
uOIMACrossFilter or uMACrossFilter or uMACrossSTFilter or uMACross3xMAFilter? false : true
disableAllFilters := filterOption == "No Alerts"? false : disableAllFilters
uSuperTrendFilter := filterOption == "No Alerts"? false : uSuperTrendFilter
u3xMATrendFilter := filterOption == "No Alerts"? false : u3xMATrendFilter
uBothTrendFilters := filterOption == "No Alerts"? false : uBothTrendFilters
uOIMACrossFilter := filterOption == "No Alerts"? false : uOIMACrossFilter
uOI3xMAFilter := filterOption == "No Alerts"? false : uOI3xMAFilter
uOISTFilter := filterOption == "No Alerts"? false : uOISTFilter
uMACrossFilter := filterOption == "No Alerts"? false : uMACrossFilter
uMACrossSTFilter := filterOption == "No Alerts"? false : uMACrossSTFilter
uMACross3xMAFilter := filterOption == "No Alerts"? false : uMACross3xMAFilter
dodgerblue = #1E90FF
lightcoral = #F08080
buyColour = green
sellColour = #f44336
buyclr = buyColour_=="Lime"?lime: buyColour_=="Aqua"?aqua: buyColour_=="DodgerBlue"?dodgerblue: buyColour_=="Gray"?gray: buyColour_=="Yellow"?yellow:green
sellclr = sellColour_=="Red"?red: sellColour_=="Fuchsia"?fuchsia: sellColour_=="Blue"?blue: sellColour_=="Black"?black: sellColour_=="Orange"?orange: maroon
variant(type, src, len) =>
v1 = sma(src, len)
v2 = ema(src, len)
v3 = wma(src, len)
v4 = vwma(src, len)
v5 = 0.0
v5 := na(v5[1]) ? sma(src, len) : (v5[1] * (len - 1) + src) / len
v6 = 2 * v2 - ema(v2, len)
v7 = 3 * (v2 - ema(v2, len)) + ema(ema(v2, len), len)
v8 = wma(2 * wma(src, len / 2) - wma(src, len), round(sqrt(len)))
v11 = sma(sma(src,len),len)

a1 = exp(-1.414*3.14159 / len)
b1 = 2*a1*cos(1.414*3.14159 / len)
c2 = b1
c3 = (-a1)*a1
c1 = 1 - c2 - c3
v9 = 0.0
v9 := c1*(src + nz(src[1])) / 2 + c2*nz(v9[1]) + c3*nz(v9[2])

e = ema(v1, len)
v10 = v1+(v1-e)

type=="EMA"?v2 : type=="WMA"?v3 : type=="VWMA"?v4 : type=="SMMA"?v5 : type=="DEMA"?v6 : type=="TEMA"?v7 : type=="HullMA"?v8 : type=="SSMA"?v9 : type=="ZEMA"?v10 : type=="TMA"? v11: v1

ma_fast = variant(typeFast, ma_src, lenFast)
ma_medium = variant(typeMedium, ma_src, lenMedium)
ma_slow = variant(typeSlow, ma_src, lenSlow)
ma_coloured = variant(typeColoured, srcColoured, lenColoured)
clrdirection = 1
clrdirection := rising(ma_coloured,2) ? 1 : falling(ma_coloured,2)? -1 : nz(clrdirection[1],1)

madirection = ma_fast>ma_medium and ma_medium>ma_slow? 1 : ma_fast<ma_medium and ma_medium<ma_slow? -1 : 0
madirection := disableSlowMAFilter? ma_fast>ma_medium? 1 : ma_fast<ma_medium? -1 : 0 : madirection
madirection := disableMediumMAFilter? ma_fast>ma_slow? 1 : ma_fast<ma_slow? -1 : 0 : madirection
madirection := disableFastMAFilter? ma_medium>ma_slow? 1 : ma_medium<ma_slow? -1 : 0 : madirection
madirection := disableFastMAFilter and disableMediumMAFilter? ma_coloured>ma_slow? 1 : -1 : madirection
madirection := disableFastMAFilter and disableSlowMAFilter? ma_coloured>ma_medium? 1 : -1 : madirection
madirection := disableSlowMAFilter and disableMediumMAFilter? ma_coloured>ma_fast? 1 : -1 : madirection

SUp=hl2-(SFactor*atr(SPd))
SDn=hl2+(SFactor*atr(SPd))
STrendUp = 0.0
STrendDown = 0.0
STrendUp := close[1]>STrendUp[1]? max(SUp,STrendUp[1]) : SUp
STrendDown := close[1]<STrendDown[1]? min(SDn,STrendDown[1]) : SDn
STrend = 0
STrend := close > STrendDown[1] ? 1: close< STrendUp[1]? -1: nz(STrend[1],1)
Tsl = STrend==1? STrendUp: STrendDown


noiupper = abs(highestbars(oiLength))
noilower = abs(lowestbars(oiLength))

dcolour = madirection==1?green:madirection==-1?red:yellow
plotshape(hideTrendDirection? na : madirection, title="3xMA Trend Direction", location=location.bottom,style=shape.square, color=dcolour,transp=10)
_3xmabuy = 0
_3xmasell = 0
_3xmabuy := clrdirection == 1 and close>ma_fast and madirection==1 ? nz(_3xmabuy[1])+1 : clrdirection == 1 and madirection==1? nz(_3xmabuy[1])>0?nz(_3xmabuy[1])+1 : 0 : 0
_3xmasell := clrdirection ==-1 and close<ma_fast and madirection==-1 ? nz(_3xmasell[1])+1 : clrdirection ==-1 and madirection==-1? nz(_3xmasell[1])>0?nz(_3xmasell[1])+1 : 0 : 0
//
// SuperTrend Filtering
stbuy = 0
stsell = 0
stbuy := clrdirection == 1 and STrend==1 ? nz(stbuy[1])+1 : 0
stsell := clrdirection ==-1 and STrend==-1 ? nz(stsell[1])+1 : 0

st3xmabuy = 0
st3xmasell = 0
st3xmabuy := (disable3xMAFilter or _3xmabuy>0) and stbuy>0 ? nz(st3xmabuy[1])+1 : 0
st3xmasell := (disable3xMAFilter or _3xmasell>0) and stsell>0 ? nz(st3xmasell[1])+1 : 0

oiMACrossbuy = 0
oiMACrosssell = 0
oi3xmabuy = 0
oi3xmasell = 0
oi3xmabuy := oiMACrossbuy>0 and (disable3xMAFilter or madirection==1)? nz(oi3xmabuy[1])+1 : 0
oi3xmasell := oiMACrosssell>0 and (disable3xMAFilter or madirection==-1)? nz(oi3xmasell[1])+1 : 0

oistbuy = 0
oistsell = 0
oistbuy := oiMACrossbuy>0 and STrend==1? nz(oistbuy[1])+1 : 0
oistsell := oiMACrosssell>0 and STrend==-1? nz(oistsell[1])+1 : 0

macrossSTbuy = 0
macrossSTsell = 0
macrossSTbuy := crossover(ma_fast,ma_coloured) and STrend==1? nz(macrossSTbuy[1])+1 : 0
macrossSTsell := crossunder(ma_fast,ma_coloured) and STrend==-1? nz(macrossSTsell[1])+1 : 0

macross3xMAbuy = 0
macross3xMAsell = 0
macross3xMAbuy := crossover(ma_fast,ma_coloured) and (disable3xMAFilter or madirection==1) ? nz(macross3xMAbuy[1])+1 : 0
macross3xMAsell := crossunder(ma_fast,ma_coloured) and (disable3xMAFilter or madirection==-1) ? nz(macross3xMAsell[1])+1 : 0

long = (u3xMATrendFilter and _3xmabuy==1) or (uSuperTrendFilter and stbuy==1) or (uBothTrendFilters and st3xmabuy==1) or
(uOI3xMAFilter and oi3xmabuy==1) or (uOISTFilter and oistbuy==1) or (uOIMACrossFilter and oiMACrossbuy==1) or
(uMACrossSTFilter and macrossSTbuy==1) or (uMACross3xMAFilter and macross3xMAbuy==1)
short = (u3xMATrendFilter and _3xmasell==1) or (uSuperTrendFilter and stsell==1) or (uBothTrendFilters and st3xmasell==1) or
(uOI3xMAFilter and oi3xmasell==1) or (uOISTFilter and oistsell==1) or (uOIMACrossFilter and oiMACrosssell==1) or
(uMACrossSTFilter and macrossSTsell==1) or (uMACross3xMAFilter and macross3xMAsell==1)

plotshape( long ? long : na, title="Long Line Marker",
location=location.belowbar,style=shape.arrowup, color=buyclr,transp=20,size=size.auto, text='▄▄▄▄▄▄▄▄▄▄▄▄',textcolor=buyclr)
plotshape( short ? short : na, title="Short Line Marker",
location=location.abovebar,style=shape.arrowdown, color=#f44336,transp=20,size=size.auto, text='▄▄▄▄▄▄▄▄▄▄▄▄',textcolor=sellclr)

hbuy = 0
hsell = 0
hbuy := clrdirection == 1 ? nz(hbuy[1])+1 : 0
hsell := clrdirection ==-1 ? nz(hsell[1])+1 : 0
macrossbuy = 0
macrosssell = 0
macrossbuy := crossover(ma_fast,ma_coloured)? nz(macrossbuy[1])+1 : 0
macrosssell := crossunder(ma_fast,ma_coloured)? nz(macrosssell[1])+1 : 0
//
along = (disableAllFilters and hbuy==1) or (uMACrossFilter and macrossbuy==1)
ashort = (disableAllFilters and hsell==1) or (uMACrossFilter and macrosssell==1)
plotarrow( along ? 1 : ashort? -1 : na, title="ColouredMA or MACross Arrow", colorup=buyColour, colordown=sellColour, maxheight=100, minheight=50, transp=20)
long := long or along
short := short or ashort
alertcondition(long or short, title="Signal Alert",message="Sniper enter")
//EOF

I see, thank you very much for the assistance. The error was most probably due to my crude modification, as the script was originally only supposed to display current daily high-low, I modified it to show previous day. I will try it out.
Hope you have a wonderful day and Thank you once again, TicTak!

Edit: It worked like a charm, I tried to reread the code, but its a bit too cryptic for me as a layman to understand the changes you have made to make it much more efficient but, I truly appreciate the help, especially since you give it an "enum Timeframe" allowing for customization of the period in the MT4 itself. It's really helpful, since last time I actually did it manually and ended up with 3 different script, all three of which performed really slowly.

hi, try this one
https://www.forexfactory.com/thread/...0#post14638460

I am looking for someone who can create an expert advisor for my simple and profitable strategy (for free)

Hello, can you please help me?
I want an indicator that scans the hidden divergence and regular divergence of the MACD with the following instructions and shows it to me.

-It should check "hidden divergence" with the default MACD(12,26,9) - From the current candle to a maximum of 60 candles befor it.
-and then check for the "regular divergence" with MACD(6,13,4) between "hidden divergence" - From the current candle to a maximum of 30 candles befor it.

can anyone code this indicator for me?

this indicator not fixed. please try again

thanks

I just checked in tester and I see exactly the same arrows as on realtime chart.
Live chart:

Tester chart: