I will code your EAs and Indicators for no charge

Quoting emmy4

Disliked

...combining the MT4 Accelerator oscillator and the Awesome oscillator; when their combined histogram matches, i need an arrow to appear on chart on current/closed candle with pop up alerts...only appear on the first match...

Ignored

Quoting Alesamo

Disliked

Hello, I would like to try a simple strategy (TF 5 min.) with an EA that trades as follows: Go long when * 20 SMA > 50 SMA and * Stoch (5,3) is 25 or less and * Signal candle is bullish (i.e., hammer, doji, piercing, etc.) and * The close of the signal candle is less than the high of the previous candle. SL/TP: * SL (1x ATR) – low of entry bar * Target exit: (2 x ATR) + entry price or market price at close of trading (for that it would be great if it’s possible to specify start and end time of trading), whatever comes first * ATR-rule: if SL = 2x...

Ignored

Quoting elghina

Disliked

...Horizontal EMA indicator...Time frame can be changed...Period...method...Apply to...

Ignored

Quoting cja

Disliked

{quote} Apologies to those 40 people who downloaded the previous indicator, the code was not updating the past levels in real time when the inputs were set to "Extend lines to current price = true". I never tested the indicator for real time updating as I wrongly assumed that the original code would update but have since found and deleted 2 lines of the original code that was preventing the real time update. {file} {image} {image} {image}

Ignored

   // input variables
   int mnBUY=10; // Magic Number for BUY Trades
   int mnSEL=20; // Magic Number for SELL Trades
 
   datetime bOpTm=0, sOpTm=0;
   double bOpPx=0, sOpPx=0;
 
   for(int i=OrdersTotal()-1; i>=0; i--) {
   if(OrderSelect(i,SELECT_BY_POS) && OrderSymbol()==symbol)
      {
      bOpTm=OrderOpenTime();
      bOpPx=OrderOpenPrice();
      if(OrderMagicNumber()==mnBUY) {i=bOpTm; i=bOpPx;}}
 
      {
      sOpTm=OrderOpenTime();
      sOpPx=OrderOpenPrice();
      if(OrderMagicNumber()==mnSEL) {i=sOpTm; i=sOpPx;}}
   }

Quoting Erebus

Disliked

{quote} With all the criteria so well defined, I'm sure ChatGPT could whip that up in, oh, 5-seconds, try it and see

Ignored

Quoting AquaMan12345

Disliked

anyone have this indicator mq4 file.. can someone share.. or create new indicator similar to like this but with mq4 file {file}

Ignored

Quoting AquaMan12345

Disliked

anyone have this indicator mq4 file.. can someone share.. or create new indicator similar to like this but with mq4 file {file}

Ignored

//+------------------------------------------------------------------+
//|                                           Heikin_Ashi_ZigZag.mq4 |
//|                                                    Naguisa Unada |
//|                                                             None |
//+------------------------------------------------------------------+
#property copyright "Naguisa Unada"
#property link      "https://www.mql5.com/en/users/unadajapon/news"
#property version   "1.00"
#property strict
#property indicator_chart_window
#property indicator_buffers 5
#property indicator_plots   5
#define _mtfCall(_buff, _y) iCustom(NULL, TimeFrame, IndicatorFileName, PERIOD_CURRENT, _buff, _y)
#define _interpolate(buff) buff[i + k] = buff[i] + (buff[i + n] - buff[i]) * k / n
//--- plot Hige1_
#property indicator_label1  "Hige1_"
#property indicator_type1   DRAW_HISTOGRAM
#property indicator_color1  clrRed
#property indicator_style1  STYLE_SOLID
#property indicator_width1  1
//--- plot Hige2_
#property indicator_label2  "Hige2_"
#property indicator_type2   DRAW_HISTOGRAM
#property indicator_color2  clrLimeGreen
#property indicator_style2  STYLE_SOLID
#property indicator_width2  1
//--- plot Body1_
#property indicator_label3  "Body1_"
#property indicator_type3   DRAW_HISTOGRAM
#property indicator_color3  clrRed
#property indicator_style3  STYLE_SOLID
#property indicator_width3  3
//--- plot Body2_
#property indicator_label4  "Body2_"
#property indicator_type4   DRAW_HISTOGRAM
#property indicator_color4  clrLimeGreen
#property indicator_style4  STYLE_SOLID
#property indicator_width4  3
//--- plot ZigZag
#property indicator_label5  "ZigZag_"
#property indicator_type5   DRAW_SECTION
#property indicator_color5  clrSilver
#property indicator_style5  STYLE_SOLID
#property indicator_width5  1
//--- input parameters
input ENUM_TIMEFRAMES    TimeFrame             = PERIOD_CURRENT;                // Time Frame
input bool                    Interpolate         = true;                            // Interpolate
input bool                 Show_ZigZag            = true;                            // Show ZigZag
input bool                   alert_ON            = true;                            // Alert switch
input bool                   alert_Current        = false;                            // Alert on Current bar
input bool                   alert_Message       = true;                            // Alert Message
input bool                   alert_Sound         = true;                            // Alert Sound
input bool                   alert_Email         = false;                            // Send E-mail
input bool                    alert_Notify         = false;                      // Send Push nortification
input string                 Soundfile           = "alert2.wav";                // Alert sound file
//--- indicator buffers
double         Hige1_Buffer[];
double         Hige2_Buffer[];
double         Body1_Buffer[];
double         Body2_Buffer[];
double            ZigZag_Buffer[];
string             IndicatorFileName, short_name;
int                 tFrame;
//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
{
    //--- indicator buffers mapping
    SetIndexBuffer(0, Hige1_Buffer);
    SetIndexBuffer(1, Hige2_Buffer);
    SetIndexBuffer(2, Body1_Buffer);
    SetIndexBuffer(3, Body2_Buffer);
    if (Show_ZigZag)
        SetIndexBuffer(4, ZigZag_Buffer);
    
    if (TimeFrame < Period()) 
       tFrame = Period();
   else
       tFrame = TimeFrame;
       
   string TimeFrameStr = GetTimeFrameString(tFrame); 
   short_name = "HeikinAshi_ZigZag-" + TimeFrameStr;
   IndicatorShortName(short_name);
   IndicatorFileName = WindowExpertName();
    //---
    return(INIT_SUCCEEDED);
}
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
{
    //---
    int i, y, n, k, limit, pos;
    datetime ctime;
    double haOpen, haHigh, haLow, haClose;
    
    if (rates_total < 10)
        return(-1);
    if (prev_calculated < 0) 
        return(-1);
    if (prev_calculated == 0)
        limit = rates_total - 5;
    else
        limit = rates_total - prev_calculated + 1;
    if (tFrame == Period())
    {
        for (i = limit; i >= 0; i--)
        {
            haOpen  = (Body1_Buffer[i + 1] + Body2_Buffer[i + 1]) / 2;
            haClose = (open[i + 3] + high[i + 3] + low[i + 3] + close[i + 3] + open[i + 2] + high[i + 2] + low[i + 2] + close[i + 2] +
                                open[i + 1] + high[i + 1] + low[i + 1] + close[i + 1] + open[i] + high[i] + low[i] + close[i] * 3) / 18;
                                
            haHigh  = MathMax(high[i], MathMax(haOpen, haClose));
          haLow   = MathMin(low[i],  MathMin(haOpen, haClose));
          
          if (haOpen < haClose)
          {
              Hige1_Buffer[i] = haLow;
             Hige2_Buffer[i] = haHigh;
          }
          else
          {
              Hige1_Buffer[i] = haHigh;
             Hige2_Buffer[i] = haLow;
          }
    
          Body1_Buffer[i] = haOpen;
          Body2_Buffer[i] = haClose;
        }
        
        if (Show_ZigZag)
        {
            for (i = limit; i >= 0; i--)
            {
                ZigZag_Buffer[i + 1] = EMPTY_VALUE;
                
                if (Body1_Buffer[i] < Body2_Buffer[i] && Body1_Buffer[i + 1] > Body2_Buffer[i + 1])
                    ZigZag_Buffer[i + 1] = Hige2_Buffer[i + 1];
                    
                if (Body1_Buffer[i] > Body2_Buffer[i] && Body1_Buffer[i + 1] < Body2_Buffer[i + 1])
                    ZigZag_Buffer[i + 1] = Hige2_Buffer[i + 1];
            }
        }
    }
    else
    {
        limit = (int)MathMax(limit, MathMin(rates_total - 5, (limit + 1) * tFrame / Period()));
        
        for (i = limit; i >= 0; i--)
        {
            y = iBarShift(NULL, tFrame, time[i]);
            Hige1_Buffer[i] = _mtfCall(0, y);
            Hige2_Buffer[i] = _mtfCall(1, y);
            Body1_Buffer[i] = _mtfCall(2, y);
            Body2_Buffer[i] = _mtfCall(3, y);
            if (Show_ZigZag)
                ZigZag_Buffer[i] = _mtfCall(4, y);
            
            if (!Interpolate || (i > 0 && y == iBarShift(NULL, tFrame, time[i - 1])))
                continue;
            ctime = iTime(NULL, tFrame, y);
            
            for (n = 1; (i + n) < rates_total && time[i + n] >= ctime; n++)
                continue;
                
            for (k = 1; k < n && (i + n) < rates_total && (i + k) < rates_total; k++)
            {
                _interpolate(Hige1_Buffer);
                _interpolate(Hige2_Buffer);
                _interpolate(Body1_Buffer);
                _interpolate(Body2_Buffer);
                if (Show_ZigZag)
                    _interpolate(ZigZag_Buffer);
            }
        }
    }
    
    if (alert_ON && Show_ZigZag)
    {
        if (alert_Current)
            pos = 0;
        else     
            pos = 1;
        if (ZigZag_Buffer[pos + 1] != EMPTY_VALUE && Body1_Buffer[pos] < Body2_Buffer[pos])
            Do_Alert(" Up Trend");
        else if (ZigZag_Buffer[pos + 1] != EMPTY_VALUE && Body1_Buffer[pos] > Body2_Buffer[pos])
            Do_Alert(" Down Trend");
    }
    //--- return value of prev_calculated for next call
    return(rates_total);
}
//+------------------------------------------------------------------+
string GetTimeFrameString(int timeFrame)
{
    string TimeFrameStr;
    
    switch(timeFrame)
   {
      case PERIOD_M1 :     TimeFrameStr = "Period_M1";     break;
      case PERIOD_M5 :     TimeFrameStr = "Period_M5";     break;
      case PERIOD_M15 : TimeFrameStr = "Period_M15";     break;
      case PERIOD_M30 : TimeFrameStr = "Period_M30";     break;
      case PERIOD_H1 :     TimeFrameStr = "Period_H1";     break;
      case PERIOD_H4 :     TimeFrameStr = "Period_H4";     break;
      case PERIOD_D1 :     TimeFrameStr = "Period_D1";     break;
      case PERIOD_W1 :     TimeFrameStr = "Period_W1";     break;
      case PERIOD_MN1 : TimeFrameStr = "Period_MN1";     break;
      default : TimeFrameStr = "Current TF";
   }
   
   return(TimeFrameStr);
}
//+------------------------------------------------------------------+
void Do_Alert(string doWhat)
{
    static string   prev_alert = "nothing";
    static datetime prev_time;
    string message;
    if (prev_alert != doWhat || prev_time != Time[0]) 
    {
        prev_alert = doWhat;
        prev_time  = Time[0];
        message    = StringConcatenate(Symbol(), " at ", TimeToStr(TimeLocal(), TIME_SECONDS), " ", short_name, doWhat);
        
        if (alert_Message) 
            Alert(message);
            
        if (alert_Email)   
            SendMail(StringConcatenate(Symbol(), " ", short_name), message);
            
        if (alert_Notify)  
            SendNotification(message);
            
        if (alert_Sound)   
            PlaySound(Soundfile);
    }
}
//+------------------------------------------------------------------+

Quoting Zygimantas

Disliked

Hello guys. Is there any availibility to create EA from this pine script? I found this strategy on TradingView. //@version=4 //Time Frame: H1 strategy("Pin Bar Magic v1", overlay=true) // User Input usr_risk = input(title="Equity Risk (%)",type=input.integer,minval=1,maxval=100,step=1,defval=3,confirm=false) atr_mult = input(title="Stop Loss (x*ATR, Float)",type=input.float,minval=0.1,maxval=100,step=0.1,defval=0.5,confirm=false) slPoints = input(title="Stop Loss Trail Points (Pips)",type=input.integer,minval=1,maxval=1000,step=1,defval=1,confirm=false)...

Ignored

Quoting chimoong

Disliked

Hi coders, I'm a beginner, please help as I do not know the correct way to code. I would like to get below Open Trades info from a loop :- 1) OrderOpenTime() of BUY open order, i.e. bOpTm 2) OrderOpenTime() of SELL open order, i.e. sOpTm 3) OrderOpenPrice() of BUY open order, i.e. bOpPx 4) OrderOpenPrice() of SELL open order, i.e. sOpPx You may have a question what if there are 3 BUY open trades and 5 SELL open trades for a symbol, but no worry about the number of BUY and SELL trades as I have set to maximum number of BUY trades=1 and maximum number...

Ignored

// input variables
   int mnBUY=10; // Magic Number for BUY Trades
   int mnSEL=20; // Magic Number for SELL Trades
 
   datetime bOpTm=0, sOpTm=0;
   double bOpPx=0, sOpPx=0;
   string symbol=_Symbol;
 
   for(int i=OrdersTotal()-1; i>=0; i--) 
    {
   if(OrderSelect(i,SELECT_BY_POS) && OrderSymbol()==symbol)
    {
      if(OrderMagicNumber()==mnBUY) 
       {
       bOpTm=OrderOpenTime();
       bOpPx=OrderOpenPrice();
       }
      if(OrderMagicNumber()==mnSEL)
       { 
       sOpTm=OrderOpenTime();
       sOpPx=OrderOpenPrice();
       }
    }
   }

Quoting BestTraderEv

Disliked

{quote} // input variables int mnBUY=10; // Magic Number for BUY Trades int mnSEL=20; // Magic Number for SELL Trades datetime bOpTm=0, sOpTm=0; double bOpPx=0, sOpPx=0; string symbol=_Symbol; for(int i=OrdersTotal()-1; i>=0; i--) { if(OrderSelect(i,SELECT_BY_POS) && OrderSymbol()==symbol) { if(OrderMagicNumber()==mnBUY) { bOpTm=OrderOpenTime(); bOpPx=OrderOpenPrice(); } if(OrderMagicNumber()==mnSEL) { sOpTm=OrderOpenTime(); sOpPx=OrderOpenPrice(); } } }

Ignored

Quoting jblanked

Disliked

{quote} I added the magic number for you; it can already be tested on different time frames, just make sure to change the time frame in the strategy tester to the one that you want. {file}

Ignored