I will code your EAs and Indicators for no charge

Quoting lazamoro

Disliked

Buenos dias..!! En primer lugar, disculpe, es una traducción de Google. Le pediría por favor si alguien es tan amable de decirme, si conocen al propietario de este indicador adjunto en ex. Me gustaría hablar con él. O si el autor es desconocido, ¿cómo puedo convertirlo para ponerlo en un cuadro separado? {file}Muchas gracias y un cordial saludo.

Ignored

Quoting jblanked

Disliked

{quote} Isn't this already showing divergences?

Ignored

Quoting kette

Disliked

{quote} this is a macd with the same functions not for Slingshots1 {file} {image} {image}

Ignored

Quoting Slingshots1

Disliked

{quote} Hi GeorgeB and other expert coders please can you help in converting the attached to an ea based on 15minutes chart?.... ema 21 cross 55ema ... candle close then next open candle after is ENTRY .....based on 5digits broker (500PIPS) ....STOP IS 500PIPS LAST LOW FOR UPTREND OR LAST HIGH FOR DOWNTREND.......TAKE-PROFIT IS 500PIPS. SIMPLIFIED.....NZDJPY 15MINUTES{image}{image}{file}..TODAY.BUY....STOP LOSS.....81.9270......ENTRY.....82.4270.....TAKE PROFIT.....82.9270.

Ignored

Quoting euroswiss

Disliked

{quote} Hi George, Thank you. Yes, I put the files in the sound folder. Although here I noticed an anomaly, there is no Sound folder in the MQL folder, and I created it. Here I think is the "problem". It doesn't work anyway. I'm trying to find another solution.

Ignored

Quoting Georgebaker

Disliked

{quote} Yes you are correct, if MT4 has not made an sound folder when you installed it that's the problem. You need to make a new installation and make sure that the sound folder is created during the installation. FerruFX says it here: {image}

Ignored

Quoting jblanked

Disliked

{quote} Here you go! Adjust to your liking {file}

Ignored

Quoting cja

Disliked

{quote} Correct me if I am wrong but didn't I already supply you with a script that does this?? Here is an updated version plus a Delete script that removes only the objects that the "Drag and Drop OHLC v1" script puts on the chart. {file} {file} I had a bit more of a thought about the scripts and have added the Delete option into the OHLC script inputs. This allows a single script to load the levels or remove all the OHLC levels if required. {file} {image}

Ignored

Quoting classy

Disliked

{quote} again superb script , i really apreciate your selfless creation.May God bless you.CJA I JOINED FORExactory in 2012 and you always listen my al stupid idea and created a lo i mean alot indicators ,script for me . you know i follow smart money and i belive it is almost impossible to spot accurately their tricks/traps/deceive/manipulation /liquidity etc but your creation always help me as a tool/weapons. i always pray for you and your family and salute your selfless mind. yes your ohlc script is my main tool to spot smc activites but i need...

Ignored

//+------------------------------------------------------------------+
//|                                               Highest Lowest.mq5 |
//|                              Copyright :copyright: 2018, Vladimir Karputov |
//|                                           http://wmua.ru/slesar/ |
//+------------------------------------------------------------------+
#property copyright "Copyright :copyright: 2018, Vladimir Karputov"
#property link      "http://wmua.ru/slesar/"
#property version   "1.000"
#property indicator_chart_window
#property indicator_buffers 2 
#property indicator_plots   2 
//--- plot Arrows 
#property indicator_label1  "Highest" 
#property indicator_type1   DRAW_ARROW 
#property indicator_color1  clrBlue 
#property indicator_width2  1 
#property indicator_label2  "Lowest" 
#property indicator_type2   DRAW_ARROW 
#property indicator_color2  clrRed 
#property indicator_width2  1 
//--- input parameters 
input ushort   InpHighestCode = 159;      // Symbol code to draw Highest
input ushort   InpLowestCode  = 159;      // Symbol code to draw Lowest
//--- An indicator buffers for the plot 
double         HighestBuffer[];
double         LowestBuffer[];
//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
  {
//--- indicator buffers mapping 
   SetIndexBuffer(0,HighestBuffer,INDICATOR_DATA);
   SetIndexBuffer(1,LowestBuffer,INDICATOR_DATA);
//--- Define the symbol code for drawing in PLOT_ARROW 
   PlotIndexSetInteger(0,PLOT_ARROW,InpHighestCode);
   PlotIndexSetInteger(1,PLOT_ARROW,InpLowestCode);
//--- Set the vertical shift of arrows in pixels 
   PlotIndexSetInteger(0,PLOT_ARROW_SHIFT,-5);
   PlotIndexSetInteger(1,PLOT_ARROW_SHIFT,5);
//--- Set as an empty value 0 
   PlotIndexSetDouble(0,PLOT_EMPTY_VALUE,EMPTY_VALUE);
   PlotIndexSetDouble(1,PLOT_EMPTY_VALUE,EMPTY_VALUE);
//---
   return(INIT_SUCCEEDED);
  }
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
  {
//---
/*
   int bar_0=0;
   int bar_rates_total_minus_1=rates_total-1;
   Comment("prev_calculated=",prev_calculated,"\n",
           "time[",bar_0,"]=",time[bar_0],"\n",
           "time[",bar_rates_total_minus_1,"]=",time[bar_rates_total_minus_1]);
*/
//---
   if(rates_total<10)
      return(0);
//---
   int limit=prev_calculated-2;
   if(prev_calculated==0)
     {
      ArrayInitialize(HighestBuffer,EMPTY_VALUE);
      ArrayInitialize(LowestBuffer,EMPTY_VALUE);
      limit=1;
     }
   if(rates_total!=prev_calculated)
      int d=0;
//---
   for(int i=limit;i<rates_total-1;i++)
     {
      if(high[i-1]<high[i] && high[i]>high[i+1])
        {
         int d=0;
         HighestBuffer[i]=high[i];
        }
      else
         HighestBuffer[i]=EMPTY_VALUE;
      //---
      if(low[i-1]>low[i] && low[i]<low[i+1])
        {
         int d=0;
         LowestBuffer[i]=low[i];
        }
      else
         LowestBuffer[i]=EMPTY_VALUE;
     }
//--- return value of prev_calculated for next call
   return(rates_total);
  }
//+------------------------------------------------------------------+

//+------------------------------------------------------------------+
//|                                               Highest Lowest.mq5 |
//|                              Copyright :copyright: 2018, Vladimir Karputov |
//|                                           http://wmua.ru/slesar/ |
//+------------------------------------------------------------------+
#property copyright "Copyright :copyright: 2018, Vladimir Karputov"
#property link      "http://wmua.ru/slesar/"
#property version   "1.000"
#property indicator_chart_window
#property indicator_buffers 2 
#property indicator_plots   2 
//--- plot Arrows 
#property indicator_label1  "Highest" 
#property indicator_type1   DRAW_ARROW 
#property indicator_color1  clrRed 
#property indicator_width2  1 
#property indicator_label2  "Lowest" 
#property indicator_type2   DRAW_ARROW 
#property indicator_color2  clrBlue 
#property indicator_width2  1 
//--- input parameters 
input ushort   InpHighestCode = 159;      // Symbol code to draw Highest
input ushort   InpLowestCode  = 159;      // Symbol code to draw Lowest
//--- An indicator buffers for the plot 
double         HighestBuffer[];
double         LowestBuffer[];
//+------------------------------------------------------------------+
//| Custom indicator initialization function                         |
//+------------------------------------------------------------------+
int OnInit()
  {
//--- indicator buffers mapping 
   SetIndexBuffer(0,HighestBuffer,INDICATOR_DATA);
   SetIndexBuffer(1,LowestBuffer,INDICATOR_DATA);
//--- Define the symbol code for drawing in PLOT_ARROW 
   PlotIndexSetInteger(0,PLOT_ARROW,InpHighestCode);
   PlotIndexSetInteger(1,PLOT_ARROW,InpLowestCode);
//--- Set the vertical shift of arrows in pixels 
   PlotIndexSetInteger(0,PLOT_ARROW_SHIFT,-5);
   PlotIndexSetInteger(1,PLOT_ARROW_SHIFT,5);
//--- Set as an empty value 0 
   PlotIndexSetDouble(0,PLOT_EMPTY_VALUE,EMPTY_VALUE);
   PlotIndexSetDouble(1,PLOT_EMPTY_VALUE,EMPTY_VALUE);
//---
   return(INIT_SUCCEEDED);
  }
//+------------------------------------------------------------------+
//| Custom indicator iteration function                              |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total,
                const int prev_calculated,
                const datetime &time[],
                const double &open[],
                const double &high[],
                const double &low[],
                const double &close[],
                const long &tick_volume[],
                const long &volume[],
                const int &spread[])
  {
//---
 /*  int bar_0=0;
   int bar_rates_total_minus_1=rates_total-1;
   Comment("prev_calculated=",prev_calculated,"\n",
           "time[",bar_0,"]=",time[bar_0],"\n",
           "time[",bar_rates_total_minus_1,"]=",time[bar_rates_total_minus_1]);
*/
//---
   if(rates_total<10)
      return(0);
//---
   int limit=prev_calculated-2;
   if(prev_calculated==0)
     {
      ArrayInitialize(HighestBuffer,EMPTY_VALUE);
      ArrayInitialize(LowestBuffer,EMPTY_VALUE);
      limit=1;
     }
   if(rates_total!=prev_calculated)
      int d=0;
//---
   for(int i=limit;i<rates_total-1;i++)
     {
      if(open[i+1]<close[i+1] && (close[i+1]-open[i+1])>(open[i+1]-low[i+1]) && open[i]<close[i] && (close[i]-open[i])>(open[i]-low[i]) && high[i]>high[i+1] && high[i]>high[i-1] && (close[i]-open[i])>(close[i-1]-open[i-1]) && close[i-1]>close[i] && close[i-1]>(high[i]-((high[i]-low[i])/2)))
        {
         int d=0;
         HighestBuffer[i]=high[i];
        }
      else
         HighestBuffer[i]=EMPTY_VALUE;
      //---
      if(open[i+1]>close[i+1] && (open[i+1]-close[i+1])>(high[i+1]-open[i+1]) && open[i]>close[i] && (open[i]-close[i])>(high[i]-open[i]) &&low[i]<low[i+1] && low[i]<low[i-1] && (open[i]-close[i])>(open[i-1]-close[i-1]) && close[i-1]<close[i] && close[i-1]<(low[i]+((high[i]-low[i])/2))) 
        {
         int d=0;
         LowestBuffer[i]=low[i];
        }
      else
         LowestBuffer[i]=EMPTY_VALUE;
     }
//--- return value of prev_calculated for next call
   return(rates_total);
  }
//+------------------------------------------------------------------+

Quoting rocktheedge

Disliked

its mql5 code i tried to convert it mql4 copy buffer issue is appearing tried alot couldnt resolve can someone please resolve this issue {file}

Ignored

Quoting jeanlouie

Disliked

{quote} {quote} Whats wrong with objectgetdouble(price1&2)? {quote} If you don't mean end points, and you want the price at some candle location within a trendline, then decide the candle index you want from the current bar. Experiment with indexes of 0 and the indexes of the 2 trendline anchor points, and some index in between the anchor points.

Ignored

Quoting frodo77

Disliked

This indicator has an alert when arrow prints, but no pop up window. Would it be possible to add this please? Thank you so much. {file}

Ignored

Quoting frodo77

Disliked

You get a sound alert, but no window pop up to say which pair.

Ignored

Quoting frodo77

Disliked

This indicator has an alert when arrow prints, but no pop up window. Would it be possible to add this please? Thank you so much. {file}

Ignored