BBMA Dashboard

BUY NOW
current ver 22.1 - be care about scammers in the web, currently dashboard is selling only on telegram @amirtrader

note that only versions above 8 make reliable signals.
**here is our discussion about my personal method using BBMA**
https://www.forexfactory.com/showthr...&goto=lastpost

This is a Multi pair and Multi time frame dashboard. it is looking for 29 Essential Types of "BBMA System" Setups and Signals (founder of the system is Mr. Oma ally):

*Reentry Dashboard (touching WMA5)
*Reentry Cluster - it is a special powerfull type of Reentry, it will specify Reentry when there is a Reentry on all MA5-MA10 and MidBB at a same time
*Reentry After CSM - it is a special type of Reentry, it will specify Reentry, only if there was a CSM before.
*Reentry After CSAK - and it will specify Reentry, only if there was a CSAK before.
*Reentry_MA50Break Confirm - showing those Reentrys that have a breakout of EMA50 in their lower timeframe (tf#3) as a trigger
*Reentry After Reentry - show only those Reentrys that they had a bigger Reentry with a same direction before, at their higher timeframe
*Reentry_ZZL_Dashboard - it shows those Reentrys which they have confirmation from trend direction by midBB and EMA50
*Reentry_EMA50_Dashboard - it show those Reentrys which they have a Rejection of EMA50 on their middle timeframe
*Reentry_HTF_CSM - this is a special Reentry which have confirmation from CSM in both 2 higher timeframes, for example if there is a sell Reentry in M15, there is a sell CSM in both H1 and H4 before.
*Diamond_Setup_Dashboard - it is a famous setup, where all MA50, midBB and WMA5 get close to each other and then price touch these cluster
*CSM Dashboard (closing candle out of Bollinger Band) - you can filter it based on MA50 with a switch on/off, also you can filter it based on a lower timeframe CSM as a trigger
*CSAK Dashboard (closing candle beyond Middle Bollinger Band) - you can filter it based on CSM in lower timeframe with a switch on/off
*CSAK_AfterExtreme_Dashboard - it shows those CSAKs that happen after an Extreme
*Extreme Dashboard (WMA5 out side the Bollinger Band) - with a switch on/off, you can filter it based on lots filter like engulfing pattern, Stochastic OB/OS, check distance to opposite WMA and etc. even you can use some trigger filters like CSAK or CSA in lower timeframes
*Extreme_MA50Touch - this powerfull setup, show only those Extremes which they have a confirmation from EMA50 touch as well. this method have a switch on/off filter too, that you can choose EMA50 must be outside of the band or not. also you can choose to filter if there is a Reentry in higher timeframe or not.
*MagicExtreme_Dashboard - it show when both MA5 and MA10 be outside the band
*RE Dashboard (Reentry > Extreme) - it check 2 consecutive timeframe higher timeframe must be on Reentry, lower timeframe must be Extreme, there is a filter that you can choose Extreme be a simple Extreme or be a Magic Extreme
*RM Dashboard (Reentry > MHV)
*REE Dashboard (Reentry > Extreme > Extreme) - it check 3 consecutive timeframe higher timeframe must be on Reentry, middle timeframe Extreme and lower timeframe must be Extreme.
*EEE Dashboard (Extreme > Extreme > Extreme) - it check 3 consecutive timeframe if all of them have Extreme, it will show.
*EE Dashboard (Extreme > Extreme) - it check 2 consecutive timeframe, if there is an Extreme (MA5 outside the Band) in both timeframe, it will show.
*MHV_Dashboard
*BB Squeeze_Dashboard - showing on which pair Bollinger Squeezed and bands get tight
*BBTouch_Dashboard - showing touch of Bollinger Bands
*BB Squeeze Breakout_Dashboard - showing on which pair after a Bollinger Squeeze, now there is a breakout
*BBMA Full Map - show a summery of 5 essential setup in 4 different timeframes(see screenshots)
*Auto Trading (new feature added on ver 16.5)

each setup come with multiple awesome filters, which make them more powerful and more accurate. anyone can find his/her personal setup using these filters. (check newer posts)


How It Work?
each setup or signal have it's own principles for example as a "Reentry Dashboard", it automatically calculate the slope of the moving average and when price comes near the MA it will show by color and alarm (when MA touch, it will show a red box as a sell side). or as an " Extreme" Finder Dashboard, it automatically check the WMA5 and Bollinger Band position on previous closed bar or current realtime bar. or an example for "REE Dashboard": if you see a red color on H1, it means there is a reentry sell in H4, Extreme in H1, Extreme in M15. if there is no opportunity the color would be Gray.
for more details, there is a demo version, available for download in channel, try it.

Features:
*All the boxes are clickable so you can simply go to your intended pair or time frame with only one click
*All possible types of alerts (Telegram-popup-Phone notifications-email)
*You can choose your pairs list to automatically use Market Watch or from manual created list
*All dashboard features are adjustable. (such as: the Y distance of the entire dashboard, text font size, the height of boxes and the Y distance between boxes, box colors)
*You can show or hide the time frames that you want.
*you can limit the number of pairs in dashboard (suitable for slow PCs)
*Auto trading and profit/loss Management
*Never miss a Setup or Signal of the BBMA System again - "MultiPair and MultiTimeFrame Alert Scanner"

some key Inputs:
Pip_distance: the acceptable distance between Moving Average and price to show sell or buy opportunity.
CandleID: you can choose the bar number that you want to recognize the setup in, 0- means current open candle 1- means previous closed candle, so if you want to be alerting on touch set this parameter to 0.
you can see the full input parameters in the screenshot.

BUY NOW

Disclaimer: this is not a signal provider tool, its only a reference scanner tool with alarm, which reduce screening time for a fully analytic system called BBMA, so first you need to learn BBMA method.
contact me on telegram or join the channel for downloading a demo: @amirbbma
https://t.me/amirbbma
Telgram channel: @amirbbma (Amir BBMA Dashboard)

Affiliate Program - lookig for consistent income?
you can join to our partnership program and enjoy an easy 100% profit from selling this dashboard.
if you have an active channel or page, or have good friendship of traders, this can be an awesome opportunity for you to make a really good income by marketing and selling this tool. for more information contact me on @amirtrader

check product reviews here:

guys we have some good updates:
Reentry Cluster (MA5-MA10-MidBB) Method added:

and great filters for Extreme_Dashboard, like Stochastick OverBought/OverSold or engulfing CandleStick pattern:

if turn on the Engulf pattern filter, it will show only those extreme that they have an Engulfing Pattern as a trigger like it:


if turn on Stoch filter, it will show only those Extremes that have confirmation from stock OB/OS:

*in the last update: the FullMap method also have Alarm!
Enjoy it guys.

on update ver 10.1 we have 2 new methods:
*BB Squeeze_Dashboard - showing on which pair Bollinger Squeezed and bands get tight
*BB Squeeze Breakout_Dashboard - showing on which pair after a Bollinger Squeeze, now there is a breakout.
after a Squeeze breakout always there ase strong and big moves.
both of them are with Alarm

guys we have another awesome update - welcome to the ver 13.2
at this version we have 3 powerful new methods:

**Reentry_ZZL_Dashboard - it shows those Reentrys which they have confirmation from trend direction by midBB and EMA50
**Reentry_EMA50_Dashboard - it show those Reentrys which they have a Rejection of EMA50 on their middle timeframe
**MagicExtreme_Dashboard - it show when both MA5 and MA10 be outside the band

update ver 14.6
we have a new method
**CSAK_AfterExtreme_Dashboard - it shows those CSAKs that happen after an Extreme


in multi timeframe Extreme related setups, now you can choose to use MA5 out of band or use touch of band

various reported bugs fixed.

---- update ver 15.4 ---- what's new?


*add a new filter to "CSAK Dashboard"
it will check "Tpwajib" in higher timeframe.
dashboard will show only those signals that they still have some room to opposite WMA5 in higher timeframe
this room is adjustable by "pip_distance" parameter

*add MA_filter to RRE-REE-RE-RM methods
it means if you set MA_filter on EMA50 and set it = True, then higher timeframe Reentry, must be above EMA50 for buy and below EMA50 for sell
so you can check ZZL in these methods as well.
(previously this filter was working for only single time frames Reentry dashboards, that its now appliable for all multi timeframe setups as well)

----Update ver 15.9 ---- what's new?

Add EMA50 Rejection in middle TF and CSAK trigger in lower TF to "Reentry_ZZL_Dashboard"
these are adjustable switch on/off filters. if turn on MA50 Rejection, it will show those ZZL Reentrys which they have a Rejection of EMA50 in middle timeframe.
the CSAK trigger also check in tf #3, if turn on this filter, and dashboard show a buy Reentry signal in H4, it means there is a CSAK in M15 for this ZZL Reentry.

Add a filter for "ReentryAfterCSM Dashboard" that check if this Reentry was a CSAK in higher timeframe or not
if turn on this filter, it will show only those type of ReentryAfterCSM that they were a CSAK in higher tf as well.

Add a CSA and CSAK trigger in lower timeframe to "Extreme Dashboard"
if turn on this filter, it will show only those Extreme which they have a CSA in lower timframe as a trigger


Solved some bugs about new filters added to CSAK Dashboard

Attached Image (click to enlarge)

***new update- ver 16.5

guys now we have "Auto trading" in dashboard...!
if you have a personal profitable strategy, using BBMA dashboard, now you can simply let it to take trades for you.
just sit and enjoy your coffee, Dashboard will do all thing for you.

***New update - ver 16.9

*New method Added, "Diamond Setup"
this setup also added with 2 great filters for TF2

*Auto closing Added to trade section
now you can let dashboard to close your trades in adjusted profit or loss percent of balance. no matter your trade opened manually or opened by EA

*Checking higher TF CSM, added to ReentryAfterCSM Dashboard

Attached Image (click to enlarge)

*Add RSI and CCI filter to BB Touch Dashboard

Attached Image (click to enlarge)

Enjoy it

***New Update- Ver 17.4

*Telegram Alert Added
to use it, you need a ChatID. by sending a PM to @BBMA_Dashboard_Bot i will give your personal ChatID number to you.
actually it is your unic ChatID that you must put it to dashboard inputs, then let dashboard to be running on your VPS, so you will recieve alers from this Bot in Telegram.

we can even add this bot to any channel as a message sender, and every channel also have its own special ChatID
also dont forget to add telegram to valid URLs in Mt4 setting: https://api.telegram.org



*Space check to opposite WMA, Added in Extreme Dashboard
it can help when you use some confirmation like CSAK in lower timeframe for your Extreme setup. so you can check how much space left.

*Add CSA trigger to REE_Dashboard
with this filter you will get alert only for those REE which have a CSA in TF#3

***New Update Ver 18.1

*New methods Added

-Extreme_MA50Touch
this powerful setup, show only those Extremes which they have a confirmation from EMA50 touch as well. this method have a switch on/off filter too, that you can choose EMA50 must be outside of the band or not.

-Reentry_HTF_CSM
this is a special Reentry which it have confirmation from CSM in both 2 higher timeframes, for example if there is a sell Reentry in M15, there is a sell CSM in both H1 and H4 before.


*Add multi timeframe CSM check filter to CSM dashboard - if you turn on this filter then it show only those CSM that they are CSM in lower timeframes too. (both tf#2 and tf#3)

*Add CSAK trigger in lower timeframe to Extreme dashboard - by using this filter you would have only those Extremes which they have a CSAK in lower timeframe (tf#2)

*Add CSAK trigger in lower timeframe to ReentryAfterCSM dashboard - if you have a ReentryAfterCSM in higher timeframe, it will show that if there is a CSAK in tf#3 as a trigger.

*Add candle open and close outside the band filer to BB touch Dashboard

Attached Image (click to enlarge)

i wish you all have nice profit in this new year, Enjoy it

***New Update - ver 19.1
now dashboard cover almost all of your possible personal strategys on Reentry.
(if your personal strategy not included in these filters, just let me know, i can add your desired filter for Reentry too.)



*also we have a new filter for ZZL dashboard, which can check higher timeframe to be a ZZL too

***New Update - Ver 20.1

*new filters added to "BB touch Dashboard"
now dashboard can recognize touch of Flat bands.
it is working based on Pip Distance input (by points), if the difference of TopBB or LowBB, betwin current candle and previous candle be lower than this input, then dashboard assume it as a Flat band. so adjust this input based on your working timeframe and pairs.



you can use all other filters simultaneously too. for example get a touch of Flat band while there is an Extreme on the band.

*new filters added to "Reentry Dashboard"
-it can check if a Reentry was after an Extreme or not, for example there is a Reentry sell, it search on previous candles to check if there is an Extreme sell too or not.
you can also adjust it to how far it must go back to find an Extreme (how many candles)

-check magic Extreme in lower timeframes. eater TF2 or TF3

-check being ZZL in Reentry timeframe or in one higher timeframe than Reentry
-you can choose it show Reentrys after CSM or CSAK or after Both


-multiple bugs fixed

Hi guys,
as you know, you can set dashboard to show signals based on any BBMA strategy that you want.
let explain it by some examples from applying different strategy by dashboard.
strategy 1 - a Reentry that have Extreme in lower TF (TF#2) and at a same time, EMA50 is out of band too.
for this combination, you need to enable these switches:





strategy 2 - a Reentry after CSM , which have a CSM or CSAK in higher TF previously.

----Update ver 20.8 ---- what's new?
we have some new filters in "Extreme Dashboard" and also "BB Touch Dashboard"
at this update, most of CSAK and CSA triggers integrated to "Extreme Dashboard" too.
before this, these filters were available for "Reentry Dashboard" only
Enjoy it

----Update ver 21.2 ---- what's new?
on this update i added some features to auto trading section, like TP and SL based on ATR
check full list here:

also some confirmations filters now available on CSM Dashboard as well: