I will code your EAs and Indicators for no charge

Quoting cja

Disliked

{quote} Try this. NOTE : The name cannot be changed as the indicator will stop working. {file}{image}{image}{image} This version is intended for greater accuracy if only selecting a single Bar/Candle {file}

Ignored

 
 
   /////////// ntk
   if (debug_on)
   {
   string direction = DOWN;
   thetp = FindTP(hc,DOWN);
   direction = UP;
   thenext = FindTP(hc,UP);
   Print ("test ==============  627 hard coded to see if program can find RnS lines : ") ;  
   }
 
....
 
  if(direction == DOWN)
   {
      min = 0;
      for(int ii = ObjectsTotal()-1;ii>=0;ii--)
      {
         if(ObjectType(ObjectName(ii)) == OBJ_HLINE && StringFind(ObjectName(ii),"Green") != -1)
         {
            if(ObjectGet(ObjectName(ii),1) < entry-150*Point && ObjectGet(ObjectName(ii),1) > min)
            min = ObjectGet(ObjectName(ii),1);
         }
         //ntk
         if( debug_on)
         Print ("720 what found: "+StringFind(ObjectName(ii),"Green"+ " delive to "+ min) );      
      }
   }

2021.11.01 21:30:20.318    Candle_Time_End_And_Spread NZDCAD,H1: uninit reason 3
2021.11.01 21:30:20.318    RectangleReader NZDCAD,H1: uninit reason 3
2021.11.01 21:29:55.240    metaneural_dashboard indi debug SRR NZDCAD,H1: test ==============  627 hard coded to see if program can find RnS lines :
2021.11.01 21:29:55.240    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
......
2021.11.01 21:29:55.240    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
2021.11.01 21:29:40.291    metaneural_dashboard indi debug SRR NZDCAD,H1: test ==============  627 hard coded to see if program can find RnS lines :
2021.11.01 21:29:40.291    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
2021.11.01 21:29:40.291    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
....
2021.11.01 21:29:40.291    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
2021.11.01 21:26:36.532    metaneural_dashboard indi debug SRR NZDCAD,H1: test ==============  627 hard coded to see if program can find RnS lines :
2021.11.01 21:26:36.532    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
2021.11.01 21:26:36.532    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
2021.11.01 21:26:36.532    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
....
 
2021.11.01 21:26:36.532    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1
2021.11.01 21:26:36.532    metaneural_dashboard indi debug SRR NZDCAD,H1: 707 what found: -1

Quoting meladsamir

Disliked

{quote} i cant do this ??

Ignored

Quoting RodrigoBRJ

Disliked

{quote} Hi, Tintep. You could add in this setting of the indicator, on the left side of the line, a number that shows how many times the chart has touched the line and the candle has closed leaving a wick, in this case how many times has the candle closed without breaking the line? If you prefer, could you just do the lines on the M15, please? I made this example below, the number of touches will appear on the left side of the line (i selected these lines in yellow to use as an example), I marked in yellow the touches that will be counted by the...

Ignored

Quoting tintep

Disliked

{quote} Hi , RodrigoBRJ. This you want It seems that the code needs to be rewritten. It use long time. I can't do that . I am sorry. but if you like your HL_Objects indicator. you can use with this. It old code . It can use but not perfect. I fix warning and made button. if you use with Crypto setting "UseZigZagForHL = false ". {image} {file}

Ignored

Quoting RodrigoBRJ

Disliked

{quote} Okay friend, no problems, thanks anyway for all the help. Could you send me the .mq4 of HL-Objects you please? And I will test the fibonacci indicator, thank you very much for the indication.

Ignored

Quoting tintep

Disliked

{quote} Hi meladsamir . You can change " period , id and button x " if you want same picture.

Ignored

Quoting Alesiosc

Disliked

@jeanlouie hello jean. could i trouble you to adjust this indicator for me please. if you could add corner and x,y axis positioning and colour change. and remove bar time and just leave server and local date and time. i would be very gratefull. thanks {file} also the server and local time and date are off. dont know whats going on there {image} its 18:02 local time at time of posting the image above. ive just checked and my server time is the same as above so will probably change when the market opens

Ignored

Quoting Samalin

Disliked

{quote} Good day Sir, thanks for all your efforts and supports, please kindly help to make your indicator session Hilo Range Bars possible to add more than once on chart

Ignored

Quoting cja

Disliked

{quote} I have updated both versions for multi sessions and I have also changed the Comments code so the user can load separate Comments for each session. Use the shift inputs to shift the Comments and make sure to use a new Unique ID number for each new session. NOTE : You cannot change the name in any way because the indicator will not work. {file} {image} {file} {image}

Ignored

Quoting Alesiosc

Disliked

@jeanlouie hello jean. could i trouble you to adjust this indicator for me please. if you could add corner and x,y axis positioning and colour change. and remove bar time and just leave server and local date and time. i would be very gratefull. thanks { copyrighted attachment deleted by staff } also the server and local time and date are off. dont know whats going on there {image} its 18:02 local time at time of posting the image above. ive just checked and my server time is the same as above so will probably change when the market opens

Ignored

Quoting TooSlow

Disliked

{quote} Why are you posting code when the coder ask that his code not be posted ? You even changed the name!!

Ignored

{
//----
   datetime t;
   string name;
   for(int i=0;i<Bars;i++)
   {
          t=Time[i];
          name = "NDS_" + t;
          if(ObjectFind(name) >= 0) ObjectDelete(name);
          name = "Suppl_" + t;
          if(ObjectFind(name) >= 0) ObjectDelete(name);
   }
//----
ObjectsDeleteAll(0,OBJ_LABEL);
//----
return(0);
}

//+------------------------------------------------------------------+
//| AvgVolume                                                        |
//+------------------------------------------------------------------+
int AVGVolume()
{
   double tempv;
   int limit;
   int counted_bars=IndicatorCounted();
//---- last counted bar will be recounted
   if(counted_bars>0) counted_bars--;
   if ( NumberOfBars == 0 )
      NumberOfBars = Bars-counted_bars;
   limit=NumberOfBars; //Bars-counted_bars;
   
      
   for(int i=0; i<limit; i++)   
      {
      tempv=0;
       
         
   for( int n=i;n<i+MA_Length;n++ )
      {
      tempv= Volume[n] + tempv;
      }
      v4[i] = NormalizeDouble(tempv/MA_Length,0);                         // AVERAGE VOLUME
      Vol[i]= iVolume(NULL, 0, i);                                        // CURRENT VOLUME
      
double MIDDLEOFBAR   = (High[i+1]+Low[i+1])/2;                             // EXACT MIDDLE
double UPOFBAR       = (High[i+1]+Low[i+1])/2 + (High[i+1]-Low[i+1])/3.6;  // UP CLOSE    
double DOWNOFBAR     = (High[i+1]+Low[i+1])/2 - (High[i+1]-Low[i+1])/3.6;  // DOWN CLOSE  
 
// MIDDLECLOSE    if ( Close[i+1] > DOWNOFBAR2  && Close[i+1] < UPOFBAR2 )
// UP BAR         Close[i+1] > Close[i+2]  
// DOWN BAR       Close[i+1] < Close[i+2]
// WIDE SPREAD    SPREADHL[i+1] > AvgSpread[i+1]*1.8
// NARROW SPREAD  SPREADHL[i+1] < AvgSpread[i+1]*0.8
 
if (High[i+1]>High[i+2] && SPREADHL[i+1] > AvgSpread[i+1]*1.8 && Close[i+1] < DOWNOFBAR && Vol[i+1] > Vol[i+2] && Vol[i+1] > v4[i+1] && Vol[i+1] > v4[i+1])
   {TextOutput(i, High[i+1]+shDS,1, i+1);  if(displayAlert == true)DisplayAlert("SM marked up the prices indicating strong bullishness. Get ready for MarkDown. ",Symbol());}  //REGULAR UPTHRUST / Weakness  
         
if (High[i+1]>High[i+2] && SPREADHL[i+1] > AvgSpread[i+1]*1.8 && Close[i+1] < DOWNOFBAR && Vol[i+1] > Vol[i+2] && Vol[i+1] > v4[i+1]*2)
   {TextOutput(i, High[i+1]+shDS,2, i+1);  if(displayAlert == true)DisplayAlert("SM marked up the prices indicating strong bullishness. Get ready for MarkDown. ",Symbol());}  //HighVol UPTHRUST / Weakness     
   
if (High[i+1]>High[i+2] && SPREADHL[i+1] > AvgSpread[i+1]*1.8 && Close[i+1] > DOWNOFBAR  && Close[i+1] < UPOFBAR && Vol[i+1] > Vol[i+2] && Vol[i+1] > v4[i+1])
   {TextOutput(i, High[i+1]+shDS,3, i+1);  if(displayAlert == true)DisplayAlert("SM was not successful in marking the price down. There was too much demand. ",Symbol());}  //Unsucessfull UPTHRUST / Demand stronger
    
if (High[i+1]>High[i+2] && SPREADHL[i+1] < AvgSpread[i+1] && Close[i+1] < DOWNOFBAR && Vol[i+1] > Vol[i+2] && Vol[i+1] < v4[i+1])
   {TextOutput(i, High[i+1]+shDS,4, i+1);  if(displayAlert == true)DisplayAlert("Upthrusts with low volume. Sign of weakness  ",Symbol());}  //PSEUDO UPTHRUST / Weakness    
    
if (Close[i+1] > Close[i+2] && Close[i+1] < MIDDLEOFBAR && SPREADHL[i+1] < AvgSpread[i+1]*0.8 && Vol[i+1] < v4[i+1])
   {TextOutput(i, High[i+1]+shDS,5, i+1);  if(displayAlert == true)DisplayAlert("No support from the SM. The SM is not interested in higher prices.  ",Symbol());}  //NO DEMAND / Weakness    
    
if (Close[i+1] > Close[i+2] && Close[i+1] > UPOFBAR && SPREADHL[i+1] > AvgSpread[i+1]*1.5 && Vol[i+1] > Vol[i+2])
   {TextOutput(i, High[i+1]+shDS,6, i+1);  if(displayAlert == true)DisplayAlert("Effort to move up. SM will test the market for supply before trying to move up further. ",Symbol());}  //MARK UP / Weakness      
    
if (Close[i+1] > Close[i+2] && Close[i+1] < MIDDLEOFBAR && SPREADHL[i+1] > AvgSpread[i+1]*1.5 && Vol[i+1] > Vol[i+2] && Vol[i+1] > v4[i+1])
   {TextOutput(i, Low[i+1]-shDS,7, i+1);  if(displayAlert == true)DisplayAlert("Effort to move up. SM will test the market for supply before trying to move up further.  ",Symbol());}  //FAILED MARK UP / Strenght  
if (Close[i+1] < Close[i+2] && Close[i+1] > UPOFBAR && Vol[i+1] < Vol[i+2] && Vol[i+1] < v4[i+1])
   {TextOutput(i, Low[i+1]-shDS,8, i+1);  if(displayAlert == true)DisplayAlert("Marking down the price. Low volume or less trading activity indicates a successful test. ",Symbol());}  //TESTING FOR SUPPLY / Strenght  
if (Close[i+1] < Close[i+2] && Close[i+1] > MIDDLEOFBAR && Vol[i+1] > v4[i+1])
   {TextOutput(i, Low[i+1]-shDS,9, i+1);  if(displayAlert == true)DisplayAlert("SM is absorbing the price. SM has decided to stop the down tide and start accumulating. ",Symbol());}  //STOPPING VOLUME / Strenght
if (Close[i+1] > Close[i+2] && Close[i+1] > MIDDLEOFBAR && Low[i+1] < Low[i+2] && Low[i+2] < Low[i+3] && SPREADHL[i+1] > AvgSpread[i+1]*1.5 && Vol[i+1] > v4[i+1])
   {TextOutput(i, Low[i+1]-shDS,10, i+1);  if(displayAlert == true)DisplayAlert("This is a good sign of strength returning and you find the trend reversing almost immediately. ",Symbol());}  //REVERSE UPTHRUST / Strenght
     
if (Close[i+1] < Close[i+2] && Close[i+1] < MIDDLEOFBAR && SPREADHL[i+1] < AvgSpread[i+1]*0.8 && Vol[1] < v4[1])
   {TextOutput(i, Low[i+1]-shDS,11, i+1);  if(displayAlert == true)DisplayAlert("In up trend are indications of continued trend. Strength, especially if they appear before/after test bars. ",Symbol());}  //NO SUPPLY / Strenght  
 
 
//+--------------
if (ObjectFind("001Vol") == -1 )
{
ObjectCreate("001Vol", OBJ_LABEL, 0, 0, 0);
ObjectSet("001Vol", OBJPROP_COLOR, Red);
ObjectSet("001Vol", OBJPROP_CORNER, Corner);
ObjectSet("001Vol", OBJPROP_XDISTANCE, 5);
ObjectSet("001Vol", OBJPROP_YDISTANCE, 15);}
ObjectSetText("001Vol","VOLUME: PENDING...", 10,"Tahoma Bold",White);
if (Vol[1] < v4[1]/2)                         { ObjectSetText("001Vol","VOLUME: VERY LOW ", 10,"Tahoma Bold",Red);}
if (Vol[1] < v4[1] && Vol[1] > v4[1]/2)       { ObjectSetText("001Vol","VOLUME: LOW ", 10,"Tahoma Bold",Red);}
if (Vol[1] > v4[1]*2)                         { ObjectSetText("001Vol","VOLUME: VERY HIGH", 10,"Tahoma Bold",Lime);}
if (Vol[1] > v4[1] && Vol[1] < v4[1]*2)       { ObjectSetText("001Vol","VOLUME: HIGH", 10,"Tahoma Bold",Lime);}

//+--------------  
if (ObjectFind("002") == -1 )
{
ObjectCreate("002", OBJ_LABEL, 0, 0, 0);
ObjectSet("002", OBJPROP_COLOR, Red);
ObjectSet("002", OBJPROP_CORNER, Corner);
ObjectSet("002", OBJPROP_XDISTANCE, 160);
ObjectSet("002", OBJPROP_YDISTANCE, 15);}
ObjectSetText("002","SPREAD: NORMAL", 10,"Tahoma Bold",White);
     
if (SPREADHL[1] > AvgSpread[1]*1.8)   {ObjectSetText("002","SPREAD: WIDE", 10,"Tahoma Bold",Lime);}
if (SPREADHL[1] < AvgSpread[1]*0.8)   {ObjectSetText("002","SPREAD: NARROW", 10,"Tahoma Bold",Red);}
//+--------------
if (ObjectFind("003") == -1 )
{
ObjectCreate("003", OBJ_LABEL, 0, 0, 0);
ObjectSet("003", OBJPROP_COLOR, Red);
ObjectSet("003", OBJPROP_CORNER, Corner);
ObjectSet("003", OBJPROP_XDISTANCE, 310);
ObjectSet("003", OBJPROP_YDISTANCE, 15);}
ObjectSetText("003","BAR POS:PENDING..", 10,"Tahoma Bold",White);
 
if (Close[1] > Close[2]){ ObjectSetText("003","BAR POS: UP BAR", 10,"Tahoma Bold",Lime);}
if (Close[1] < Close[2]){ ObjectSetText("003","BAR POS: DOWN BAR", 10,"Tahoma Bold",Red);}

//+--------------   
double UPOFBARTXT       = (High[1]+Low[1])/2 + (High[1]-Low[1])/3.6;  // UP CLOSE    
double DOWNOFBARTXT     = (High[1]+Low[1])/2 - (High[1]-Low[1])/3.6;  // DOWN CLOSE
if (ObjectFind("004") == -1 )
{
ObjectCreate("004", OBJ_LABEL, 0, 0, 0);
ObjectSet("004", OBJPROP_COLOR, Red);
ObjectSet("004", OBJPROP_CORNER, Corner);
ObjectSet("004", OBJPROP_XDISTANCE, 470);
ObjectSet("004", OBJPROP_YDISTANCE, 15);}
ObjectSetText("004","BAR CLOSE: MIDCLOSE", 10,"Tahoma Bold",White);
 
if (Close[1] > UPOFBARTXT)    { ObjectSetText("004","BAR CLOSE: UP CLOSE", 10,"Tahoma Bold",Lime);}
if (Close[1] < DOWNOFBARTXT)  { ObjectSetText("004","BAR CLOSE: DOWN CLOSE", 10,"Tahoma Bold",Red);}
//+--------------  
  }
//----
   return(0);
  }
//+------------------------------------------------------------------+

Quoting Slingshots1

Disliked

Pls coders kindly help i need a script that can meet the attached 4hrs pending order strategy found here at FF.Thanks{image}{image}{image}

Ignored

Quoting Rovieno

Disliked

Please I need help understanding fundamental analysis, I get confused about when to go short or long when the news are released. Help please

Ignored

Quoting Wan.Rizal

Disliked

Hi can u make this indicator buy setup candlestick make bull bull bear bull bull create something like a box at the middle candle (bear ) sell setup bear bear bull bear bear create something like a box at the middle candle (bull ) at any timeframe sorry, im not good at english Thanks {image} {image} {image}

Ignored

Quoting cja

Disliked

{quote} I have updated both versions for multi sessions and I have also changed the Comments code so the user can load separate Comments for each session. Use the shift inputs to shift the Comments and make sure to use a new Unique ID number for each new session. NOTE : You cannot change the name in any way because the indicator will not work. {file} {image} {file} {image}

Ignored

Quoting Arobin

Disliked

Dear Coders, Could you please add button to the indicator attached? Thank you & regards, Robin {file}

Ignored