Most Famous Blessing 3.9.6 EA and Setfiles

Quoting Mike9977

Disliked

{quote} Take a look at some the many videos on YouTube regarding this topic. Be aware that the optimisation process is as much of an art as a science. Once you dive in and start using the stratergy tester, you will start to notice things such as how different settings effect different aspects of your EA's performance. Learn as you go and don't hesistate to experiment with 'what/if' or similar senarios. The genetic algorithm in the tester enables you to test large numbers of possibilities in a relatively short time, particularly if you use the 'open...

Ignored

     66 enum tFrame {
     67     current = 0,                // Current
     68     m1 = 1,                     // M1
     69     m5 = 2,                     // M5
     70     m15 = 3,                    // M15
     71     m30 = 4,                    // M30
     72     h1 = 5,                     // H1
     73     h4 = 6,                     // H4
     74     d1 = 7,                     // Daily
     75     w1 = 8,                     // Weekly
     76     mn1 = 9                     // Monthly
     77 };

    136 input tFrame ATRTF = 0;;        // TimeFrame for ATR calculation

    210 input tFrame MACD_TF = 0;;      // Time frame for MACD calculation

    219 input tFrame RSI_TF = 3;;       // Timeframe for RSI calculation (should be lower than chart TF)

    342 int Digit[, 2], TF[10] = { 0, 1, 5, 15, 30, 60, 240, 1440, 10080, 43200 };

 1437             double GridATR = iATR(NULL, TF[ATRTF], ATRPeriods, 0) / Pip[b];[/b]

   2121         //+----------------------------------------------------------------+
   2122         //| CCI of 5M, 15M, 30M, 1H for Market Condition and Order Entry      |
   2123         //+----------------------------------------------------------------+
   2124         if (CCIEntry_ > 0) {
   2125             cci_01 = iCCI(Symbol(), PERIOD_M5, CCIPeriod, PRICE_CLOSE, 0);
   2126             cci_02 = iCCI(Symbol(), PERIOD_M15, CCIPeriod, PRICE_CLOSE, 0);
   2127             cci_03 = iCCI(Symbol(), PERIOD_M30, CCIPeriod, PRICE_CLOSE, 0);
   2128             cci_04 = iCCI(Symbol(), PERIOD_H1, CCIPeriod, PRICE_CLOSE, 0);
   2129             cci_11 = iCCI(Symbol(), PERIOD_M5, CCIPeriod, PRICE_CLOSE, 1);
   2130             cci_12 = iCCI(Symbol(), PERIOD_M15, CCIPeriod, PRICE_CLOSE, 1);
   2131             cci_13 = iCCI(Symbol(), PERIOD_M30, CCIPeriod, PRICE_CLOSE, 1);
   2132             cci_14 = iCCI(Symbol(), PERIOD_H1, CCIPeriod, PRICE_CLOSE, 1);
   2133         }

   2307             double MACDm = iMACD(NULL, TF[MACD_TF], FastPeriod, SlowPeriod, SignalPeriod, MACDPr   2307 ice, 0, 0);
   2308             double MACDs = iMACD(NULL, TF[MACD_TF], FastPeriod, SlowPeriod, SignalPeriod, MACDPr   2308 ice, 1, 0);

   2453                 if (RSI[1] != iRSI(NULL, TF[RSI_TF], RSI_Period, RSI_Price, 1)) {
   2454                     for (int Index = 0; Index < RSI_Period + RSI_MA_Period; Index++)
   2455                         RSI[Index] = iRSI(NULL, TF[RSI_TF], RSI_Period, RSI_Price, Index);
   2456                 } else
   2457                     RSI[0] = iRSI(NULL, TF[RSI_TF], RSI_Period, RSI_Price, 0);

Quoting squarty

Disliked

{quote} Thank you for the link to PDF, may I ask you which are the parameters to select for optimization ? Thank you

Ignored

Quoting Mike9977

Disliked

{quote} All and every variable can be tested by checking the box on the left hand side. Variables are of two types, either numeric or of the true/false type. If you are starting from scratch, then all of the variables should be tested and optimised. If you are just tuning up a previous optimisation, say for your broker(s), then it is arguably only the following settings that need re-optimising:- a) The grid parameters (ATRTF, period, GAF, delay and offset). b) Profit maximising parameters ( profit set, move TP, total moves). c) If the set uses the...

Ignored

Quoting richard96816

Disliked

To post a Strategy Tester report print it to a pdf file. That way nothing gets left out.

Ignored

Quoting crev

Disliked

{quote} sir how to create that pdf? i only see html

Ignored

Quoting squarty

Disliked

{quote} i'm trying something, thank you for your tricks! {image}

Ignored

Quoting squarty

Disliked

guys is there a way to create automatically a preset file from the results of optimizations ?

Ignored

      //+-----------------------------------------------------------------+
      //| Calculation of Trend Direction                                  |
      //+-----------------------------------------------------------------+
      double ima_0 = iMA(TradePairs[i]+suffix, 0, MAPeriod, 0, MODE_EMA, PRICE_CLOSE, 0);
         if(pairinfo[i].BID > ima_0 + pairinfo[i].MADistance_)
            pairinfo[i].Trend = 0;
         else
            if(pairinfo[i].ASK < ima_0 - pairinfo[i].MADistance_)
               pairinfo[i].Trend = 1;
            else
               pairinfo[i].Trend = 2;

         //+-----------------------------------------------------------------+  << This must be the first Entry check.
         //| Moving Average Indicator for Order Entry                        |  << Add your own Indicator Entry checks
         //+-----------------------------------------------------------------+  << after the Moving Average Entry.
         if(MAEntry_ > 0 && pairinfo[i].CbT == 0 && pairinfo[i].CpT < 2)
           {
            if(pairinfo[i].BID > ima_0 + pairinfo[i].MADistance_ && (!B3Traditional || (B3Traditional && pairinfo[i].Trend != 2)))
              {
               if(MAEntry_ == 1)
                 {
                  if(UseAnyEntry || pairinfo[i].IndEntry == 0 || (!UseAnyEntry && pairinfo[i].IndEntry > 0 && pairinfo[i].BuyMe))
                     pairinfo[i].BuyMe = true;
                  else
                     pairinfo[i].BuyMe = false;
                  if(!UseAnyEntry && pairinfo[i].IndEntry > 0 && pairinfo[i].SellMe && (!B3Traditional || (B3Traditional && pairinfo[i].Trend != 2)))
                     pairinfo[i].SellMe = false;
                 }
               else
                  if(MAEntry_ == 2)
                    {
                     if(UseAnyEntry || pairinfo[i].IndEntry == 0 || (!UseAnyEntry && pairinfo[i].IndEntry > 0 && pairinfo[i].SellMe))
                        pairinfo[i].SellMe = true;
                     else
                        pairinfo[i].SellMe = false;
                     if(!UseAnyEntry && pairinfo[i].IndEntry > 0 && pairinfo[i].BuyMe && (!B3Traditional || (B3Traditional && pairinfo[i].Trend != 2)))
                        pairinfo[i].BuyMe = false;
                    }
              }