I will code your EAs and Indicators for no charge | Page 1857 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #37,121
  • Jul 2, 2020 1:49am Jul 2, 2020 1:49am
Quoting mntiwana
{quote} Thanks to BlueRain for adding alerts - Though the ver is hard coded (keeping atr per 10,atr multiplier 5) with candles For those do not know much about the "XTrend3" indi in topic,it is renamed from "xSuper Trend" indicator and a little more all xSupertrend indicators derived from Supertrend indicator,"X" came in the name by "Xaphod" about in 2011 who was trying add additional feature/s - original idea/source came from "PROREALTIME" code by HKlisse in about 2008 (as per Sohocool saying) More additional description it is kind of ATR...
Thanks for deep insight.
You are the living librarian and treasure in this FF.
  • #37,122
  • Jul 2, 2020 2:23am Jul 2, 2020 2:23am
Quoting mntiwana
{quote} thanks to bluerain for adding alerts - Though the ver is hard coded (keeping atr per 10,atr multiplier 5) with candles for those do not know much about the "xtrend3" indi in topic,it is renamed from "xsuper trend" indicator and a little more all xsupertrend indicators derived from supertrend indicator,"x" came in the name by "xaphod" about in 2011 who was trying add additional feature/s - original idea/source came from "prorealtime" code by hklisse in about 2008 (as per sohocool saying) more additional description it is kind of atr...

thanks mntiwana sir

god bless you
  • #37,123
  • Jul 2, 2020 2:31am Jul 2, 2020 2:31am
Quoting BlueRain
{quote} Let's be clear.. 1. Total profit goal is reached 2. Close all positions with profit if it it matches MagicNumber. changed: if ( My_Money_Profit_Target > 0 && AccountEquity() >= AccountBalance() + My_Money_Profit_Target) Added: if ( OrderProfit() <= 0 ) continue; {file}
Hi BlueRain,

Umm. EA did not close at profit target.

'Let's be clear..
1. Total profit goal is reached
2. Close all positions with profit if it it matches MagicNumber.'

Yep this what I'm after. What I noticed is that EURUSD went pass the Profit Target but did not close and USDJPY did not reach the Profit Target. I think EA is not separating the currency pairs? thanks again.

Cheers.
  • #37,124
  • Jul 2, 2020 2:32am Jul 2, 2020 2:32am
Quoting BlueRain
{quote} Thanks for deep insight. You are the living librarian and treasure in this FF.
Thanks for your kind words though i do not deserve,all credits to experts continuously teaching us learners -
brother if possible for you to add 2 extern/inputs for ATR per and ATR multiplier as more help to users,so that they can possibly adjust it according to their needs
regards
  • #37,125
  • Jul 2, 2020 2:56am Jul 2, 2020 2:56am
Quoting BlueRain
{quote} Here you have it. Today and Week line - you can turn on/off. if turn off today, it will shows original lines. You can change linestyle, color, width for both also. {image} {file}
Thank you!
Learn from your mistakes and march on.
  • #37,126
  • Jul 2, 2020 2:59am Jul 2, 2020 2:59am
Quoting claypot
{quote} Hi BlueRain, Umm. EA did not close at profit target. 'Let's be clear.. 1. Total profit goal is reached 2. Close all positions with profit if it it matches MagicNumber.' Yep this what I'm after. What I noticed is that EURUSD went pass the Profit Target but did not close and USDJPY did not reach the Profit Target. I think EA is not separating the currency pairs? thanks again. Cheers.
No. I thought this was "Bucket" Equity protector.

This EA is basically "Equity Protector" where
* You have gained total profit as whole
* You want to close those positions with profit.

it doesn't close any specific position - specific position should have its own SL/TP.

this EA just monitor if there is profit as whole - then, close any open position with profit - means it is positive.
It won't close position with loss or if MagicNumber is not matching.

if this is not what you wanted, please list what you want.
  • #37,127
  • Jul 2, 2020 3:21am Jul 2, 2020 3:21am
Quoting mntiwana
{quote} Thanks for your kind words though i do not deserve,all credits to experts continuously teaching us learners - brother if possible for you to add 2 extern/inputs for ATR per and ATR multiplier as more help to users,so that they can possibly adjust it according to their needs regards
You mean to this Xtrend? I thought you said this is not original.
Anyway, change was just exposing to extern - those two param were there already.

Here is updated version with Option to change ATRPeriod and ATRMultiplier.

Default is as same as original value.

extern int ATRMultiplier = 5;
extern int ATRPeriod = 10;
Attached File(s)
File Type: mq4 XTrend3-Alert.mq4   62 KB | 471 downloads
  • #37,128
  • Jul 2, 2020 3:36am Jul 2, 2020 3:36am
Quoting BlueRain
{quote} You mean to this Xtrend? I thought you said this is not original. If that is fine with you, I can add those two ATR period and ATR multiplier.
No,i dont means it is original or not,all indicators altered/extended with the time if source code is there (according to users requirement and experts kindness for managing time)
i was feeling users will be have an extra choice to adjust it according to their strategy when parameters are there,as hard coded versions are limited in usage - personally i dont intend to use it,thanks for your timely consideration
and it is your greatness for extending it more -
regards
  • #37,129
  • Jul 2, 2020 3:36am Jul 2, 2020 3:36am
Quoting BlueRain
{quote} Here you have it. Today and Week line - you can turn on/off. if turn off today, it will shows original lines. You can change linestyle, color, width for both also. {image} {file}
I just noticed the numbers are slightly off because this displays lines according to 4 digit broker. Could you adjust it to display lines for 5 digit brokers?
Learn from your mistakes and march on.
  • #37,130
  • Jul 2, 2020 3:53am Jul 2, 2020 3:53am
Quoting here2there
{quote} I just noticed the numbers are slightly off because this displays lines according to 4 digit broker. Could you adjust it to display lines for 5 digit brokers?
Not sure how I can fix it.
it has nothing to do with digits when it gets open price.

if you look at the code, it just get open price of daily and weekly, and fill the daily and weekly buffer.

TodayOpenBuffer[i] = iOpen(Symbol(),PERIOD_D1,0); //this will get open price of today's candle.

WeeklyOpenBuffer[i] = iOpen(Symbol(),PERIOD_W1,0); //this will get open price of this week's candle.

maybe, your broker has different open price for daily and weekly.
  • #37,131
  • Jul 2, 2020 4:01am Jul 2, 2020 4:01am
Quoting BlueRain
{quote} ...maybe, your broker has different open price for daily and weekly.
Yes. My broker (Oanda) is a five digit broker.

For example, on GBPUSD, the open on the Daily is actually 1.24681, but the indicator shows 1.2468
And for the Weekly, the open is actually 1.23331, but the indicator shows 1.2333
Learn from your mistakes and march on.
  • #37,132
  • Jul 2, 2020 4:15am Jul 2, 2020 4:15am
Quoting here2there
{quote} Yes. My broker (Oanda) is a five digit broker. For example, on GBPUSD, the open on the Daily is actually 1.24681, but the indicator shows 1.2468 And for the Weekly, the open is actually 1.23331, but the indicator shows 1.2333
Ok. I added extra line to increase indicator digit.
IndicatorDigits(Digits);

it is MT4 default to show 4 digits and now you should have extra digit display.
Attached File(s)
File Type: mq4 daily_open_line.mq4   4 KB | 446 downloads
  • #37,133
  • Jul 2, 2020 4:50am Jul 2, 2020 4:50am
Quoting BlueRain
{quote} Ok. I added extra line to increase indicator digit. IndicatorDigits(Digits); it is MT4 default to show 4 digits and now you should have extra digit display. {file}
Thanks again!
Learn from your mistakes and march on.
  • #37,134
  • Jul 2, 2020 5:05am Jul 2, 2020 5:05am
Quoting BlueRain
{quote} No. I thought this was "Bucket" Equity protector. This EA is basically "Equity Protector" where * You have gained total profit as whole * You want to close those positions with profit. it doesn't close any specific position - specific position should have its own SL/TP. this EA just monitor if there is profit as whole - then, close any open position with profit - means it is positive. It won't close position with loss or if MagicNumber is not matching. if this is not what you wanted, please list what you want.
Hi BlueRain,

My bad. Let's start from scratch. I would like an Trade EA that managers all open trades. So requirements would be.

1. EA will close all open positive positions with specified profit if it it matches MagicNumber. Let say I run an EA that has 1 or multiple (basket) open EURUSD orders and they have same MajicNumber and they reach my specified profit $3.00 then the Trade EA close those baskets orders
2. EA StopLoss optional. This will close loss positon/s.
3. EA to work without MajicNumber as well. Can close all open positons.

Cheers.
  • #37,135
  • Jul 2, 2020 5:15am Jul 2, 2020 5:15am
Hello fxdaytrader_
I search for an EA that will repeat any closed trade either by sl or tp. I like to use it as a solution to what I could not found an Ea for, and that I have explained in post 36987
https://www.forexfactory.com/showthr...5#post13031825
and post 36955
https://www.forexfactory.com/showthr...9#post13030429

I found a little EA you have posted back in 2014 in this thred in post 4107
https://www.forexfactory.com/showthr...76#post7385176

I just wanted to ask you if this useful EA do repeating for all trades or just the first one?
If it do for all trade it could be a solution for me since I can either write all the pending stop and limit orders manually or using any script to do that for, then use your EA to reopening them when they hit either tp or sl.
  • #37,136
  • Edited 6:36am Jul 2, 2020 6:14am | Edited 6:36am
Hi!! I have a very nice indicator TMA Macd and its working fine, the only problem is if i put it on more than 3 chart it slows down and stutters my whole mt4! Can somebody help what can i do?? Thank you
Time is your friend; impulse is your enemy! - John Bogle
  • #37,137
  • Jul 2, 2020 6:18am Jul 2, 2020 6:18am
Quoting BlueRain
{quote} Not sure why you need this but here you have it. it works in any time frame. Update 1: Cleaned and removed some variables. Pip size cal was wrong. Fixed index. {image} {file}

the widest range bar in the last 2 day is the ebb of the order flow and the violation of the wrb is the invalidation of the current trend/orderflow.

Thanks .... kindly help remove pip count and reduce the zone from 10 to 5 also help enable the choice of color to use.


Thanks
  • #37,138
  • Jul 2, 2020 8:51am Jul 2, 2020 8:51am
Good Morning

I'm looking for a simple EA to help me while I'm not at the PC and for the less volatile hours of the day. If anyone can help me, I appreciate it.

The rules are:

If the Standard Deviation indicator is below an X level and is a positive bar - sell

If the Standard Deviation indicator is below an X level and is a negative bar - buy

Stop Loss and Trailing Stop are not required.

Thanks in advance!
  • #37,139
  • Edited Jul 3, 2020 3:47am Jul 2, 2020 9:18am | Edited Jul 3, 2020 3:47am
Quoting Jozec
...possible for this indicator to have three instances as one, e.g i have above 1440,5,1. 240,5,1 and 60,5,1....
- that indicator you posted is decompiled, so can't do anything with it, but I can see how it would work and have made one from scratch, took a lot longer than I care to admit
- there was quite a rabbit hole with this stochastic stuff, there's a discrepancy with how mql4 calculates some stochastic values, espcially in mtf mode, the difference is tiny, probably inconsequential too, but it's there
- the specific indicator you want is the third one that has x3, for 3 instances

Primer on Stochastic and MT4's version:
- 100 x (Ci - Lx)/(Hx-Lx)
- Ci=current close Lx=Lowest of last x bars Hx=Highest of last x bars
- The above formula gives the K fast value/line
- MT4's default stochastic displays the main(kslow) and signal(dslow) lines of the stochastic actually as moving averages of the stochastic formula above
- K fast is the formula above, the K slow is a ma of the k fast, the d slow is a ma of the k slow.
- ie with the inbuilt stochastic indicator, if the stochastic K period is 1, it will be equal to the k fast

In-built Indicator Discrepancy with manual check:
Attached Image (click to enlarge)
Click to Enlarge Name: stochastic query pic1.png Size: 118 KB

Attached Image (click to enlarge)
Click to Enlarge Name: stochastic query mtf case pic2.png Size: 99 KB


MTF nrp note:
Attached Image (click to enlarge)
Click to Enlarge Name: stochastic all mtf nrp thing pic1.png Size: 67 KB


Attached Indicators:
Stochastic_All_iSto_MTF
- displays all 3 stochastic lines, kfast, kslow and dslow
- uses inbuilt iStochastic to get values of inbuilt stochastic indicator

Stochastic_All_Correct_MTF_nrp
- displays all 3 stochastic lines, kfast, kslow and dslow
- calcualtes the 3 lines internally
- nrp option
- with the x3 version, I got 9 bufferes in there, I don't seem to have any problem, if you do have a problem let me know and I'll remove some unused lines.
Attached Image (click to enlarge)
Click to Enlarge Name: stochastic all isto mtf pic1.png Size: 63 KB

Attached Image (click to enlarge)
Click to Enlarge Name: stochastic all correct mtf nrp pic 1.png Size: 103 KB


Attached File(s)
File Type: ex4 Stochastic_All_iSto_MTF.ex4   29 KB | 471 downloads

Attached File(s)
File Type: ex4 Stochastic_All_Correct_MTF_nrp.ex4   33 KB | 432 downloads

Attached File(s)
File Type: ex4 Stochastic_All_Correct_MTF_nrp_x3.ex4   77 KB | 476 downloads
  • #37,140
  • Jul 2, 2020 10:49am Jul 2, 2020 10:49am
Quoting BlueRain
{quote} You mean to this Xtrend? I thought you said this is not original. Anyway, change was just exposing to extern - those two param were there already. Here is updated version with Option to change ATRPeriod and ATRMultiplier. Default is as same as original value. extern int ATRMultiplier = 5; extern int ATRPeriod = 10; {file}
dear sir but still there is no pop up alert/arrow alert/sound alert

and plz if possible for you
can you add rsi and ema option
instead of this atr period and multiplier
please

thanks in advance
411 traders viewing now, 1 is registered:
DashEABot