I will code your EAs and Indicators for no charge

Hello mntiwana ;

https://www.forexfactory.com/attachm...4&d=1538583887

Where can I get this indicator?

I think it's because your narrative is not clear enough, or coder don't think it's profitable.

master ... i own my trading on your works ... and i must say a big thanks for that,

however i will love if you can help me with this very last request


I need an indicator that shows the candlestick with the largest range in the last 2 days
i.e 1 bar per each day

range = (high - low)

timeframe is 30MINS ONLY

Hi,
I wondered if anyone could suggest why this EA doesn't seem to be working.
It's a simple RSI 10 Triggering a Sell Limit/Buy Stop when it's above 80/below20 but waits to enter the trade until it passes beyond the previous hi or lo of the previous candle.
Relatively simple.
That's the theory except the EA doesn't seem to trigger and I'm not sure why.
Thank you in advance.


void OnTick()
{
double RSIvalue = iRSI (_Symbol,_Period,10,PRICE_CLOSE,1); //RSI set to period of 10, trade will be entered based on RSI on previous candle

double LowOfCandleBeforeRSITrigger = iLow (_Symbol,_Period,2); //This is the low of the candle prior to the RSI candle, used for sell orders

double HighOfCandleBeforeRSITrigger = iHigh (_Symbol,_Period,2);//This is the high of the candle prior to the RSI candle, used for buy orders

double StopLossForBuy = Low[iLowest (_Symbol,_Period,MODE_LOW,4,1)]; //This is the stop loss price for the buy. It's based on the lowest of the previous 4 candles relative to the trade candle

double StopLossForSell = High[iHighest (_Symbol,_Period,MODE_HIGH,4,1)]; //This is the stop loss price for the sell. It's based on the highest of the previous 4 candles relative to the trade candle

double TakeProfitForSell = Bid - ((StopLossForSell - Bid)*2); //This is the take profit price for the sell. It aims to give a 3:1 profit ratio based on the stop loss used.

double TakeProfitForBuy = Ask + ((Ask - StopLossForBuy)*2); //This is the take profit price for the buy. It aims to give a 3:1 profit ratio based on the stop loss used.

if(RSIvalue > 80 && OrdersTotal() == 0 && Bid == LowOfCandleBeforeRSITrigger)
{
OrderSend(_Symbol,OP_SELL,1,Bid,5,StopLossForSell,TakeProfitForSell,NULL,0,0,Red);

}
else if(RSIvalue < 20 && OrdersTotal() == 0 && Bid == HighOfCandleBeforeRSITrigger)
{
OrderSend(_Symbol, OP_BUY,1,Ask,5,StopLossForBuy,TakeProfitForBuy,NULL,0,0,Green);

}


}
//+------------------------------------------------------------------+

dear Bluerain can you make ea with this indicator please..iam waiting for your reply.

Thank you lghr.
Just reading the code again - I'm thinking that after the RSI has hit 80 or 20, it will have probably have moved off these levels on the next bar (i.e. less than 80 and more than 20) - so the code effectively wants to look back (for example) four bars to acknowledge that the RSI was greater or less than 80 /20. I wondered if any code came to mind as I'm drawing a blank !
Thanks in advance.

I would appreciate it if someone would modify this indicator to only display the current Daily Open (not previous Daily open) as a horizontal line going across the chart. Also, please do the same for the Weekly open. And finally, please place settings to allow users to choose their own colors, styles, and width for these lines. Thank you!

Hello all,
Just wondering, can anyone help me with a simple RSI indicator with the arrow with the alert (and mobile notification).
like in the example below. so, There will be arrow(s) as long as the the RSI cross to overbought or oversould zone. it should be in closed price. and maybe i can modify the RSI Period ? thankyou

Better yet, make an analog of this indicator.

I am looking for an alert when color changes on this indicator. Current TF is good, option to choose other TF is good also. An arrow or symbol above the color change would be great if possible. The current arrows are MTF and are for 13/50 ema cross. Be great if I didn't have to use MTF and MArsi provided an alert and visual signal. Alert should be immediate upon new candle open with MArsi showing different color.

Attached Image (click to enlarge)
https://www.forexfactory.com/attachm...1&d=1592399726


Thanks
Peter

Hi ccokaca
Welcome at FF as it is your first post -
Kardes,I already read your post somewhere but was unable to response properly,sorry
it needs some more informations to pinpoint the exact indicator,because so many indicators of Mladen can be displayed close to,same way and or alike way,if you could possibly provide few more hints i can help you find and provide the required one of course as i have every single indicator of Mladen and that list goes to thousands of every type,variations and styles
it looks like close to this i think

Attachment g

--------------------------------------------------------

"Corrected average 2.5"

I think it is Corrected Averages ver of Mladen Rakic that you asking/looking for
The ver in topic is an better choice and or alternative to crossing averages (2 MAs cross)
the most important feature "number of deviations" that represent its correction up to users desired level
exercising different parameters and methods are advised to bring it at users required level

it support some 37 possible averaging methods
22 prices
DS (double smooth the average)
2 state color change - change on slope or average cross
first average line for priceline (the faster one) can be show or not
custom TFs possibility
2 state interpolation possibility when mtf mode applied
--------------------------------------------------------------
37 Averaging methods and 22 prices that can be enjoyed

pr_close, // Close
pr_open, // Open
pr_high, // High
pr_low, // Low
pr_median, // Median
pr_typical, // Typical
pr_weighted, // Weighted
pr_average, // Average (high+low+open+close)/4
pr_medianb, // Average median body (open+close)/2
pr_tbiased, // Trend biased price
pr_tbiased2, // Trend biased (extreme) price
pr_haclose, // Heiken ashi close
pr_haopen , // Heiken ashi open
pr_hahigh, // Heiken ashi high
pr_halow, // Heiken ashi low
pr_hamedian, // Heiken ashi median
pr_hatypical, // Heiken ashi typical
pr_haweighted, // Heiken ashi weighted
pr_haaverage, // Heiken ashi average
pr_hamedianb, // Heiken ashi median body
pr_hatbiased, // Heiken ashi trend biased price
pr_hatbiased2 // Heiken ashi trend biased (extreme) price
};

enum enMaTypes
{
ma_adxvma, // Adxvma
ma_ahr, // Ahrens moving average
ma_alxma, // Alexander moving average - ALXMA
ma_dema, // Double exponential moving average - DEMA
ma_dsema, // Double smoothed exponential moving average - DSEMA
ma_emas, // Ema derivative - EMAD
ma_ema, // Exponential moving average - EMA
ma_hull, // Hull moving average - HMA
ma_ie2, // IE/2
ma_ilinr, // Integral of linear regression slope
ma_itl, // Instantaneous trendline
ma_lagg, // Laguerre filter
ma_lead, // Leader exponential moving average
ma_linr, // Linear regression value - LSMA
ma_lwma, // Linear weighted moving average - LWMA
ma_mcg, // McGinley Dynamic
ma_mcma, // McNicholl ema
ma_nlma, // Non lag moving average
ma_pwma, // Parabolic weighted moving average - PWMA
ma_rmta, // Recursive moving trendline - RMTA
ma_sma, // Simple moving average - SMA
ma_sid, // Simple decycler - SDEC
ma_sine, // Sine weighted moving average
ma_smma, // Smoothed moving average - SMMA
ma_smoo, // Smoother
ma_ssm, // Super smoother
ma_b3p, // Three pole Ehlers Butterworth
ma_s3p, // Three pole Ehlers smoother
ma_tma, // Triangular moving average - TMA
ma_tema, // Tripple exponential moving average - TEMA
ma_b2p, // Two pole Ehlers Butterworth
ma_s2p, // Two pole Ehlers smoother
ma_vema, // Volume weighted ema - VEMA
ma_vwma, // Volume weighted moving average - VWMA
ma_zldema, // Zero lag dema
ma_zlma, // Zero lag moving average
ma_zltema // Zero lag tema
};

Anyone can code for me ? Thank you very much

Hi.. this is the 2nd time i post since i got no feedback from anyone.. hope somebody can put alert notification so that it will notify me on my android mt4, thanks..

Very impressive indicator!

It is -
and this is what Mladen do always

can anyone plz make a pop up alert function to this indicator
now it gives only sound alert
i want pop up alert

thanks in advance

You can create custom functions。

How did you get sound alert? It doesn't have any sound alert in the code at all.

anyway, I have added Alert including popup, push etc etc when trend changes.

You can use iCustom to get the value from indicator.

extern string TimeFrame = "Current";
extern int TMAPeriod = 45;
extern int Price = PRICE_MEDIAN;
extern double ATRMultiplier = 1.272;
extern int ATRPeriod = 100;
extern double TrendThreshold = 0.5;
extern bool ShowCenterLine = true;


double TMAUpperBand = iCustom(Symbol(),0,"TMA-Channel",TimeFrame,TMAPeriod,Price,ATRMultiplier,ATRPeriod,1,0);
double TMALowerBand = iCustom(Symbol(),0,"TMA-Channel",TimeFrame,TMAPeriod,Price,ATRMultiplier,ATRPeriod,2,0);

then, you can compare price if price is below or above those band.