I will code your EAs and Indicators for no charge | Page 1776 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #35,501
  • May 25, 2020 5:04pm May 25, 2020 5:04pm
Quoting Retlaw
{quote} No they don't!
Ok. Let me correct myself. Use Similar approach as I don't have all the source codes.
  • #35,502
  • May 25, 2020 7:41pm May 25, 2020 7:41pm
Hello Coders,

Please help if you can.

I need to add push notifications to this indicator attached.

Please if possible make sure it works properly and not buzz a million times and not just alert for one direction but for both directions (sell and buy).

If possible if you can have to alert add which pair (currency) along with the alert.

If you can do this it would be a GREAT HELP sir/madam.
Attached File(s)
File Type: mq4 supertrendprofit5.mq4   13 KB | 661 downloads
  • #35,503
  • May 25, 2020 8:13pm May 25, 2020 8:13pm
Hi Coders
I have found this VWAP indicator on another site and am trying to use it on M1 Gold XAUUSD broker ICMkts and it loads fine however it does not refresh on M1 or other TFs tested, only shows new data when reloaded.
Any assistance to fix would be appreciated.
Cheers
Attached File(s)
File Type: mq4 VWAP.mq4   2 KB | 660 downloads
When you are successful perhaps give a thought to others ... Kiva dot org
  • #35,504
  • May 25, 2020 8:30pm May 25, 2020 8:30pm
Quoting Sohocool
{quote} Hi As the Williams % Range is Stochastic - 100, it is easy to post this MTF Dashboard . https://www.forexfactory.com/showthr...9#post12958929 {image} {file}

thk u so much, its funny but i wasnt even aware of that recent stochastic one u created....
what a coincedence!
  • #35,505
  • May 26, 2020 2:15am May 26, 2020 2:15am
Quoting BlueRain
{quote} It is exactly as same as any pair when you issue orderSend. OrderSend(Symbol(),Cmd,Lots,OpenPrice,Slippage,StopLossPrice,TakeProfitPrice,Cmt,MagicNumber); where cmd is one of operation like OP_BUY, OB_SELL, ....
Hi Blue rain

you didnt get it the expert advisor is attached in to sa different chart say eurousd

and the ordersend has to go to another chart say eurochf
so how has symbol() to be changed ?
pl. advise
  • #35,506
  • May 26, 2020 3:07am May 26, 2020 3:07am
Hello sir
I have created binary options strategy. I need an indicator in ex4 Formate for mt4
Parameters of strategy
Time- 30 seconds candle
1- fractle period 10
2- RSI with period 19, overbought 70 and oversold 30
Buy Rules:
Fractle appears at bottom, RSI should touch or below 30 level. When this condition meat i need notification alert
Sell Rules: Fractle appear at top & RSI touched or above 70. When this condition meat i need notification alert
  • #35,507
  • May 26, 2020 3:57am May 26, 2020 3:57am
Quoting syndicat
Hi guys! Can anyone remove the errors in this indicator? I express my gratitude in advance !!! {file}
I recall you can dl the latest/correct version straight from the source, google the indicator name or here https://www.mql5.com/en/code/9175
  • #35,508
  • May 26, 2020 4:06am May 26, 2020 4:06am
Quoting PayItForward
Hi Coders I have found this VWAP indicator on another site and am trying to use it on M1 Gold XAUUSD broker ICMkts and it loads fine however it does not refresh on M1 or other TFs tested, only shows new data when reloaded. Any assistance to fix would be appreciated. Cheers {file}
Should work now, updates every tick and new bar like normal.
Attached File(s)
File Type: mq4 VWAP_2.mq4   2 KB | 713 downloads
  • #35,509
  • May 26, 2020 4:14am May 26, 2020 4:14am
Quoting Usmanshafeen
Hello sir I have created binary options strategy. I need an indicator in ex4 Formate for mt4 Parameters of strategy Time- 30 seconds candle 1- fractle period 10 2- RSI with period 19, overbought 70 and oversold 30 Buy Rules: Fractle appears at bottom, RSI should touch or below 30 level. When this condition meat i need notification alert Sell Rules: Fractle appear at top & RSI touched or above 70. When this condition meat i need notification alert
Fractal is an misleading indicator
  • #35,510
  • May 26, 2020 4:17am May 26, 2020 4:17am
Quoting BlueRain
{quote} All Currency Strength Meters use very similar approaches and it is lagging indicator. Typically, it works this way 1. Get current Day ratio double bid_ratio = DivZero(curr_bid - day_low, day_high - day_low) for all the pairs ( typically, 40 pairs ) and assign strength based on bid ration 2. take first currency from pair and add strength 3. take 2nd currency from pair and subtract strength 4. Sort based on value Due to this use of curr_bid, it is moving target and short-term oriented. Typical use for it for scalping is to take highest and...
Hi Bluerain,

Yep bid ratio based. I was thinking along the lines of a particular indicator or combination of indicators or High-Low or Highest high- Lowest low. So currency strength index base on ADX only or ATR or combo or HL. So for example what is all the EUR pairs are doing directionally at any given moment with that particular indicator/s or HL.

Cheers.
  • #35,511
  • May 26, 2020 4:19am May 26, 2020 4:19am
Quoting mntiwana
{quote} Fractal is an misleading indicator
Yep arrows always appear after 3 bars at the minimum
  • #35,512
  • May 26, 2020 4:40am May 26, 2020 4:40am
hi traders and programmers,

can someone help me to move this indicator on chart.

It has Y in it but not X. Want to move the Indicator on the Left side of the chart.

Thanks & Regards
Attached File(s)
File Type: mq4 cstime_edit.mq4   7 KB | 528 downloads
  • #35,513
  • May 26, 2020 4:46am May 26, 2020 4:46am
Quoting kubervivek
{quote} Hi Blue rain you didnt get it the expert advisor is attached in to sa different chart say eurousd and the ordersend has to go to another chart say eurochf so how has symbol() to be changed ? pl. advise
Not sure how you handle to find other pairname.

But, you don't have to use other chart to place an order.
You just have to include pairname to orderSend and include that pairname.

make sure you get correct price and symbolname
something like below ( for buy case)

string symbolname = "ENUUSD";
double OpenPrice=NormalizeDouble(MarketInfo(symbolename,MODE_ASK),Digits);

OrderSend(symbolname ,Cmd,Lots,OpenPrice,Slippage,StopLossPrice,TakeProfitPrice,Cmt,MagicNumber)
  • #35,514
  • May 26, 2020 4:47am May 26, 2020 4:47am
The attached non-repainting indicator seems to work as expected with some annoying issues I'd like to see if someone can fix. The best explanation is there are many instances where an arrow prints prior to a candle close but does not disappear when it should have. That is, I should only see non-repainted arrows on those that "stayed" with a particular candle after it had closed, while others that should have disappeared prior to the candle close remain.

To determine if an arrow should remain non-painted or not, I select 1 of them, right-click it and from the menu choose "Delete all arrows". In which case all arrows do in fact get deleted but if/when the chart is refreshed the non-repainted arrows (the ones remaining after a candle close) re-appear. Which this seems great and expected.

Is there anyway to replicate that manual process described above?

Much appreciated!
Attached File(s)
File Type: ex4 SBNR arrows nrp.ex4   33 KB | 755 downloads
  • #35,515
  • May 26, 2020 4:51am May 26, 2020 4:51am
Quoting BlueRain
{quote} Ok. Let me correct myself. Use Similar approach as I don't have all the source codes.
Hi BlueRain .... can this indicator be made so that it is updated every day, not every week
like 5 day pivots ... please
Thank you in advance
Attached File(s)
File Type: mq4 Davits Pivot V3.2 Auto.mq4   25 KB | 696 downloads
  • #35,516
  • May 26, 2020 5:35am May 26, 2020 5:35am
Quoting Retlaw
{quote} No they don't!
If you could elaborate more on using a profitable currency strength meter
Currently
NZDUSD would be a buy
AUDJPY would be a buy
USDCAD would be a sell
NZDPY would be a Buy
Attached Image
  • #35,517
  • May 26, 2020 5:36am May 26, 2020 5:36am
hi everyone, do you all know how write a code to count candle forward and only update the trailing stop loss on every 5th candle close price ?

please direct me to the related thread, thank you.
  • #35,518
  • May 26, 2020 6:03am May 26, 2020 6:03am
Quoting Sohocool
{quote} Hi As the Williams % Range is Stochastic - 100, it is easy to post this MTF Dashboard . https://www.forexfactory.com/showthr...9#post12958929 {image} {file}

What is the information you get from this dashboard, is it used for correlation.
Thank you.
  • #35,519
  • May 26, 2020 6:16am May 26, 2020 6:16am
Quoting ntk
{quote} If you could elaborate more on using a profitable currency strength meter Currently NZDUSD would be a buy AUDJPY would be a buy USDCAD would be a sell NZDPY would be a Buy {image}
Hi ntk,

The idea is find the best pair to trade. So in this scenario looking the currency strength you would trade the strongest against the weakest which would be NZDUSD as per labelled in the bottom. Yes you can trade the others mentioned but they more risk involved.

Cheers.
  • #35,520
  • May 26, 2020 6:27am May 26, 2020 6:27am
Quoting mntiwana
{quote} Fractal is an misleading indicator
Thanks alot for sharing your experience with us sir.
Really appreciated
299 traders viewing now, 2 are registered:
pipgainer
,
Joetraid