I will code your EAs and Indicators for no charge | Page 1758 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

I will code your pivot EAs for no charge 28 replies

I will code your scalping EAs for no charge 163 replies

Oanda MT4 - Indicators and EAs not showing 2 replies

EAs and indicators relating to moutaki... 22 replies

InterbankFX has loaded its MT4 platform with custom EAs, indicators and scripts 1 reply

Attachments: I will code your EAs and Indicators for no charge
Exit Attachments

I will code your EAs and Indicators for no charge

  • #35,141
  • May 16, 2020 1:27pm May 16, 2020 1:27pm
Quoting PayTheBid
Can someone please tell me why this indicator appears only on the 5min 15min and 1 hour time frame I tried it on 2 mt5 platforms from 2 different brokers but no luck Thank you {file}
Play/exercise with different provided parameters/attributes
Attached Image (click to enlarge)
Click to Enlarge Name: AUDNZDM1.png Size: 13 KB

Attached Image (click to enlarge)
Click to Enlarge Name: AUDNZDM15.png Size: 16 KB
  • #35,142
  • Edited 10:51pm May 16, 2020 1:43pm | Edited 10:51pm
Quoting Fastersc
Hi guys, May some of you take a look to this usefull tool? When I add it to a chart it it give me this error: "Expert 'zoom-hotkeys' is not custom indicator and will be removed" It has been worked pretty well but now it does not work. Can someone help me to make it work again please? Thanks. {file} {image}
fixed and tested
Attached File(s)
File Type: mq4 zoom-hotkeys_x.mq4   2 KB | 489 downloads

Edit: coded this - note: markets are closed - tested on 4 different terminal and working - had to sort of kick-start on one terminal for some reason - removed from chart/reattach/close terminal/etc - but working.

"Function "; // Hot-Key ------> see Indicator Inputs
---------------------------------------
"OneClickTrading_open/close "; // Q
"DOM_open/"; // W
"Zoom_In "; // Z
"Zoom_Out"; // X
"Chart_Start"; // Home or <
"Chart_End"; // End or >
"AutoTrading_on/off"; // A
"Terminal_open/close"; // T
"Navigator_open/close"; // N
"MarketWatch_open/close"; // M
"Data_open/close"; // D
"Symbol_open"; // U
"Indicators_open"; // I
"Grid_on/off"; // G
"Period_Division_on/off"; // Y
Attached File(s)
File Type: ex4 KB_Chart_Controls_v1.0.ex4   14 KB | 397 downloads

may be of interest - _w: white, _b: black
Attached Image
Attached File(s)
File Type: ex4 Chart_Controls_v1.1.ex4   15 KB | 398 downloads
File Type: ex4 Chart_Controls_v1.1_b.ex4   16 KB | 378 downloads
File Type: ex4 Chart_Controls_v1.1_w.ex4   15 KB | 385 downloads
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
  • #35,143
  • May 16, 2020 1:59pm May 16, 2020 1:59pm
Quoting mntiwana
{quote} Play/exercise with different provided parameters/attributes {image} {image}
I did and tried for over 2 months all kinds of things but the 4 hour is not visible whatever I do....
Did you get to see the indicator on the 4 h chart?(with the standard settings)
Thanks
Those who don't believe in magic will never find it
  • #35,144
  • May 16, 2020 2:23pm May 16, 2020 2:23pm
Quoting PayTheBid
{quote} I did and tried for over 2 months all kinds of things but the 4 hour is not visible whatever I do.... Did you get to see the indicator on the 4 h chart?(with the standard settings) Thanks
Here you go (H4)
Attached Image (click to enlarge)
Click to Enlarge Name: AUDNZDH4.png Size: 21 KB
  • #35,145
  • May 16, 2020 2:47pm May 16, 2020 2:47pm
Hi,

I purchased this one indicator from MQL. Would like to run multiple instances of the indicator on the same chart using different timeframes. Since the indicator does not have Multi-time frame option, would someone be able to guide me towards any other standalone indicator which can point towards the actual indicator (probably using iCustom function) and display it in multi-time frames?
Attached Image (click to enlarge)
Click to Enlarge Name: Scalping Pro.png Size: 29 KB
  • #35,146
  • Edited May 17, 2020 1:37am May 16, 2020 3:00pm | Edited May 17, 2020 1:37am
Quoting jeanlouie
{quote} Here you go, the pic has the original file and the new one with the ma option selected. The chart is the 1hr with a 4hr 20sma, the same setting as the indicator, you can see how the indi filps from green to red when the close is above or below the 4hr 20sma. Price_to_MTF_Open_or_MA - removed tf limit of 4hr - added option to use a mtf ma - period and type choices for the ma {file} {image}

Hi boss.. thanks a lot for your kind help..
You even added xtra functions with better visual..
thanks boss!! May god bless u..

everything is working as it's supposed to.. thank you FF coders..
  • #35,147
  • May 16, 2020 3:06pm May 16, 2020 3:06pm
Does anyone know what is the function in MQL5 that prevents fibonacci levels from being plotted from the beginning like this example here?


There is a part of the code here that maybe you can help me, I wanted to remove this part that makes it be drawn from the beginning, and that it be drawn from the previous bar and be redrawn as it is in most cases.


/---- checking for the sufficiency of the number of bars for the calculation
if(rates_total<min_rates_total || !Init) return(RESET);

//---- declaration of local variables
double iHigh[2],iLow[2];
int limit,bar;
datetime iTime[1];
static uint LastCountBar;

//---- calculations of the necessary amount of data to be copied and
//the starting number limit for the bar recalculation loop
if(prev_calculated>rates_total || prev_calculated<=0)// checking for the first start of the indicator calculation
{
limit=rates_total-min_rates_total-1; // starting index for the calculation of all bars
LastCountBar=rates_total;
}
else limit=int(LastCountBar)+rates_total-prev_calculated; // starting index for the calculation of new bars

//---- indexing elements in arrays as in timeseries
ArraySetAsSeries(time,true);

//---- main cycle of calculation of the indicator
for(bar=limit; bar>=0 && !IsStopped(); bar--)
{
//---- copy new data to the iTime array
if(CopyTime(Symbol_,TimeFrame,time[bar],1,iTime)<=0) return(RESET);

if(time[bar]>=iTime[0] && time[bar+1]<iTime[0])
{
LastCountBar=bar;


Does anyone know what is the function in MQL5 that prevents fibonacci levels from being plotted from the beginning like this example here?
Attached Image (click to enlarge)
Click to Enlarge Name: Fibo Historical 1.gif Size: 46 KB
Andrey Kalinkenko
  • #35,148
  • May 16, 2020 4:26pm May 16, 2020 4:26pm
Quoting subraghu
Try this one {file}

Thank you very much. Can you take off the numbers the Elliot count?
  • #35,149
  • Edited 7:09pm May 16, 2020 4:37pm | Edited 7:09pm
Good Day,

I was wondering if anybody would assist me. I am looking for this indicator in the attached file or someone who can code the exact replica of it if not it.

It tells you when to strike/enter a trade before being bullish or bearish. Your help would be highly appreciated.

I have the code can anybody make it mt4 compatible

#grab the current stock price
current_price = r.stocks.get_latest_price(stock)[0]
#grab the strike prices
strike_list = new_df.strike_price.unique().tolist()
#add the stock price to the list and sort
strike_list_sorted = sorted(strike_list.append(current_price),key=float)
#find the index of the current price in the list
i = strike_list_sorted.index(current_price)
#refer to diagram for strike price, since they are in order they will get the closest price to the strike price
strike_a = strike_list2[i-2] #long put strike price
strike_b = strike_list2[i-1] #short put strike price
strike_c = strike_list2[i+1] #short call strike price
strike_d = strike_list2[i+2] #long call strike price
#grabbing the furthest available expiration date within the 30-45 days
exp_date = sorted(new_df.expiration_date.unique())[-1]


Or you can try with this code

#not the cleanest of code but works ¯\_(ツ)_/¯
#long put
r.orders.order_buy_option_limit(current_price, stock, 1, exp_date, strike_a, optionType='put', timeInForce='gfd')
#short put
r.orders.order_buy_option_limit(current_price, stock, 1, exp_date, strike_b, optionType='put', timeInForce='gfd')
#short call
r.orders.order_buy_option_limit(current_price, stock, 1, exp_date, strike_c, optionType='call', timeInForce='gfd')
#long call
r.orders.order_buy_option_limit(current_price, stock, 1, exp_date, strike_d, optionType='call', timeInForce='gfd')
Attached Image (click to enlarge)
Click to Enlarge Name: short-call-vs-long-call-explained-1.png Size: 35 KB
  • #35,150
  • May 16, 2020 7:38pm May 16, 2020 7:38pm
Can somebody change HISTORY to number of BARS
Thanks
Attached File(s)
File Type: mq4 PriceAction AHA 0_2v2-mod(1).mq4   51 KB | 500 downloads
A good trader follows his rules, but great trader knows when to break them
  • #35,151
  • May 16, 2020 9:31pm May 16, 2020 9:31pm
Quoting interbucks
{quote} Thank you BlueRain, much appreciated. Will try it out soon. I knew these two work well together. Regards PS: It will be nice to be able to change the settings individually of both the indicators within the EA. On some lower timeframes adjusting the amplitude of the Halftrend as well as the length of the FreeScalper, gives much better results than on the default settings.
Since FreeScalperIndicator was not responding to EA call well, I tried to limit one call per bar but tool stops responding after few calls.
Due to that, I did some research and found interesting facts.


* freescalperindicator is histogram version of "bb-stops-v2-indicator" some one has created based on original code.
* "bb-stops-v2-indicator" was created by mladen also, just like halftrend - maybe, that is why it works together well. ( same master coder )

When you set bb-stops-v2-indicator with Deviation 2, it should match exactly as freescalperindicator's histogram.

mladen said: "That is a Bollinger bands stop(deviations set to 2) made as histogram"


I am attaching bb-stops-v2-indicator just in case any one wants.
Attached Image (click to enlarge)
Click to Enlarge Name: bb-stops-and-freescalper.JPG Size: 150 KB
Attached File(s)
File Type: mq4 bb-stops-v2-indicator.mq4   20 KB | 428 downloads
  • #35,152
  • May 16, 2020 10:16pm May 16, 2020 10:16pm
I need an MTF indicator to display trend data on multiple currency pairs using a moving average.
Learn from your mistakes and march on.
  • #35,153
  • May 17, 2020 12:29am May 17, 2020 12:29am
Quoting BlueRain
{quote} Latest changes based on requests: 1. Moved to SubWindow ( Displays bar in Horizontal only ) 2. Added options to change font size, box size, box color, font color 3. Added option to hide pip change 4. Added option to sort by PairName 5. Added option to sort by Pipchange ( means sorted by colors as color is assigned by pipchange ) 6. Changed default refresh to 1 second ( it will load faster initially now ) 7. Changed default Button Box color for up/down to Lime and Orage. {image} {image} {file} {image}
BlueRain,
Thanks for the indicator.
Is it possible to add 1)weekly HL, 2)50%(H-L/2) triggering. One for daily, one for weekly.Meaning pull indi twice to chart. Thanks
  • #35,154
  • May 17, 2020 1:13am May 17, 2020 1:13am
Quoting Phylo
{quote} fixed and tested {file} Edit: coded this - note: markets are closed - tested on 4 different terminal and working - had to sort of kick-start on one terminal for some reason - removed from chart/reattach/close terminal/etc - but working. "Function "; // Hot-Key ------> see Indicator Inputs --------------------------------------- "OneClickTrading_open/close "; // Q "DOM_open/"; // W "Zoom_In "; // Z "Zoom_Out"; // X "Chart_Start"; // Home or < "Chart_End"; // End or > "AutoTrading_on/off"; // A "Terminal_open/close"; // T "Navigator_open/close";...
It works!!! Thank you so much!
  • #35,155
  • May 17, 2020 1:40am May 17, 2020 1:40am
Quoting jeanlouie
{quote} Here you go, the pic has the original file and the new one with the ma option selected. The chart is the 1hr with a 4hr 20sma, the same setting as the indicator, you can see how the indi filps from green to red when the close is above or below the 4hr 20sma. Price_to_MTF_Open_or_MA - removed tf limit of 4hr - added option to use a mtf ma - period and type choices for the ma {file} {image}


1 more request, please..
can you please add 1 more option : ma apply to price ...
thank you for your help! May God Bless You..
  • #35,156
  • May 17, 2020 1:45am May 17, 2020 1:45am
Quoting hasan.tahir
Hi, I purchased this one indicator from MQL. Would like to run multiple instances of the indicator on the same chart using different timeframes. Since the indicator does not have Multi-time frame option, would someone be able to guide me towards any other standalone indicator which can point towards the actual indicator (probably using iCustom function) and display it in multi-time frames? {image}
Hi hasan,

You can use this indicator (Trend Map) as a guideline. I also give you the indicator i have moded (ALL AMA_optimized_final_Slope) for your guidline and comparison.

If you get error when compile. try to use compiler named scite-mql-1.4.2. it is a portable compiler


These are the lines you have to change based on original indicator. if you dont have a source code of original indicator just figure it up based on the output of indicator. for example..if it has 3 arrows...items no 1 til 3 must have also 3 lines each

Item no 4= you put the name of the indicator to be called

All indicator (original and moded) must be in the same "indicator" folder.

1.
#property indicator_color1 Gray
#property indicator_color2 Lime
#property indicator_color3 Magenta
#property indicator_width1 1
#property indicator_width2 1
#property indicator_width3 1

2.
double ExtMapBuffer1[];
double ExtMapBuffer2[];
double ExtMapBuffer3[];

3.
SetIndexStyle(0, DRAW_LINE, 1);
SetIndexBuffer(0,ExtMapBuffer1);

SetIndexStyle(1, DRAW_ARROW,1);
SetIndexBuffer(1,ExtMapBuffer2);
SetIndexArrow(1, 159);
SetIndexEmptyValue(1,0.0);

SetIndexStyle(2, DRAW_ARROW,1);
SetIndexBuffer(2,ExtMapBuffer3);
SetIndexArrow(2, 159);
SetIndexEmptyValue(2,0.0);
( you can change the style of the arrow by putting a code at "SetIndexArrow"-refer to mt4 symbols in google for arrow code)


4.
ExtMapBuffer1[k] = iCustom(Symbol1,periods[p],"AMA_optimized_final_Slope",0,i);
ExtMapBuffer2[k] = iCustom(Symbol1,periods[p],"AMA_optimized_final_Slope",1,i);
ExtMapBuffer3[k] = iCustom(Symbol1,periods[p],"AMA_optimized_final_Slope",2,i);


}
ExtMapBuffer1[k] =EMPTY_VALUE;
ExtMapBuffer2[k] =EMPTY_VALUE;
ExtMapBuffer3[k] =EMPTY_VALUE;

Note : if the indicator cannot be seen in the chart--try to adjust this line. For example some indicators have to change the maximum to 200 so that it can be seen in chart of all JPY pairs
5.
#property indicator_minimum -10.0
#property indicator_maximum 20.0

hope this help.

Note: i am not a coder. just have a very little knowledge
Attached File(s)
File Type: mq4 Trend Map.mq4   13 KB | 453 downloads
File Type: mq4 ALL AMA_optimized_final_Slope.mq4   13 KB | 456 downloads
File Type: ex4 AMA_optimized_final_Slope.ex4   28 KB | 436 downloads
  • #35,157
  • May 17, 2020 1:45am May 17, 2020 1:45am
Quoting Phylo
{quote} fixed and tested {file} Edit: coded this - note: markets are closed - tested on 4 different terminal and working - had to sort of kick-start on one terminal for some reason - removed from chart/reattach/close terminal/etc - but working. "Function "; // Hot-Key ------> see Indicator Inputs --------------------------------------- "OneClickTrading_open/close "; // Q "DOM_open/"; // W "Zoom_In "; // Z "Zoom_Out"; // X "Chart_Start"; // Home or < "Chart_End"; // End or > "AutoTrading_on/off"; // A "Terminal_open/close"; // T "Navigator_open/close";...


thanks boss! nice hotkeys n works fine..

but, is there a way to adjust the size of the hotkey display?
Attached Image
  • #35,158
  • May 17, 2020 1:48am May 17, 2020 1:48am
Quoting ill_be_back
Can somebody change HISTORY to number of BARS Thanks {file}
What does it mean by "change HISTORY to number of BARS "?

currently, History is true/false

extern bool History=true;
  • #35,159
  • May 17, 2020 1:52am May 17, 2020 1:52am
Quoting Da.Blanchot
{quote} thanks boss! nice hotkeys n works fine.. but, is there a way to adjust the size of the hotkey display? {image}
no boss - not at present - will look at in future
TSLA: 30-Dec-22 123.18 // 16-Jun-23 260.54 **111.51%**
  • #35,160
  • May 17, 2020 2:12am May 17, 2020 2:12am
Quoting Phylo
{quote} no boss - not at present - will look at in future
tq boss.. may God bless u!
142 traders viewing now, 2 are registered:
BestTraderEv
,
Samvitiki