I will code your EAs and Indicators for no charge

- thanks for confidence
- I have an iron rule not to contribute or participate with regards to automated EAs due to time constraints of testing

Please repost universally

Goodmorning everyone.
Is there anyone who can develop this system with these rules?
-Only Buy or only sell
-Buy or Sell when opening each new bar
- Multiplier xx percentage (for example 1.1.5, 2 or more) of the last entry price (for example: if multiplier 2, the first trade is 0.01 the second trade is 0.02 the third trade is 0.04 and so on.
-Profit target in currency 2/100 euro for all open trades)
-Stop loss for each trade open in currency (20/100 euro)
-If it reaches the profit target or stop loss, it closes all the trades and starts again from the next bar.
It seems simple enough, and I thank anyone who can develop it.
Best regards.

Thank you for your reply Phylo.

Dear Coders,

Need your help please if anyone can help!

I am not a coder. I do not have an IT qualification or experience. I can manage very minor changes though.

I would like to automate buy sell signals of this indicator.

Woud you please provide iCustom syntax and Buy Sell Signal syntax for this please.

Ex:

double HL_Act_Up = iCustom(NULL,PERIOD_M5,"HiLo_Activator_Profi_x",3,"Aqua","Magenta",5,15,0,0);
double HL_Act_Dn = iCustom(NULL,PERIOD_M5,"HiLo_Activator_Profi_x",3,"Aqua","Magenta",5,15,1,0);
(HL_Act_Up != EMPTY_VALUE) Order = SIGNAL_BUY;
(HL_Act_Dn != EMPTY_VALUE) Order = SIGNAL_SELL;

The above is not working for me. The Expert Advisor either does not put any order (I have tried many combinations) or if the Advisor does put any order, it only sell order every time even when there is a buy signal.

Your help is much appreciated!

Thanking you in advance for your time and consideration.

Cheers!
Sameer

Hello Master Code BlueRain,

Sir could you place simple mobile push notification on this attached indicator (MACD Alert). Where it shows the pair name and time with the alert?

Thank you kind sir for your expert help.

Better to avoid such trapping stuff but you can carry on,as i saw mostly users (if not all) dont like listen truth

Decompiled code

Dear Mntiwana,

Thank you for your reply and also respect your feedback about the indicator per se.

However, I would still like to learn / know what mistake I am making in forming iCustom & Order Syntax.

Would you be willing to help me with that? If not, May be some other Coder would like to help me with the right way of iCustom & Order Syntax in such cases.

With Respect,
Sameer

As far as iCustom, it seems syntax is correct.
However, you have to make sure buffer value filled by indicator correctly before you are checking as signal.

And, there might be other conditions which EA doesn't handle correctly which prevent entering trade like slippage etc.

"MACD 2.01 alerts + arrows"
Here is Mrtools extended ver regarding alerts and dual arrowing
Main line slope coloring
full alerting package
including push notification and onfirstbar option
full package dual arrowing - on zero cross,on signal cross
Unique ID for multiple instances if and when applied
example pic the lowest SW (sub window) - upper sw your one

Hi, I hope it’s an appropriate place to post.

I want to do some research. I found an EA online which does what I want it to (opens a trade at a set time, in the direction of your choice, and includes a trailing stop). The only issue is that it stops after one trade. I would massively appreciate it if someone could edit the code so that it continues to open trades during back-testing. Or could point me in the right direction. Thanks.

in the code, there is variable that sets variable to false so it won't trade any more.

if you want more, remove this lines

Place_Buy=false;
Place_Sell=false;

As is now, this will block any future trading.

However, if you remove, this will activate buy / sell order on every tick.
Once buy/sell, You will need to change your times for next trade.

Thank you for your reply. Is there a way to stop it from opening a trade on every tick? (I don't follow what you mean 'change times for next trade')

Please help me fix the indicator

I've been trying to add alerts to a Keltner Channel (also called an ATR channel) indicator in MT5. I haven't found one with alerts anywhere. Can someone help me out or show me how to do it. File attached.

And here's the code:
//+------------------------------------------------------------------+
//| KC.mq5 |
//| Copyright 2011, Nikolay Kositsin |
//| Khabarovsk, [email protected] |
//+------------------------------------------------------------------+
#property copyright "Copyright 2011, Nikolay Kositsin"
#property link "[email protected]"
#property description "ATR channel"
//---- indicator version
#property version "1.00"
//---- drawing the indicator in the main window
#property indicator_chart_window
//---- number of indicator buffers 3
#property indicator_buffers 3
//---- 3 plots are used
#property indicator_plots 3
//+--------------------------------------------+
//| Declaration of constants |
//+--------------------------------------------+
#define RESET 0 // the constant for getting the command for the indicator recalculation back to the terminal
//+--------------------------------------------+
//| Indicator drawing parameters |
//+--------------------------------------------+
//---- drawing the indicator as a line
#property indicator_type1 DRAW_LINE
//---- use BlueViolet color for the indicator line
#property indicator_color1 BlueViolet
//---- the indicator line is a dash-dotted curve
#property indicator_style1 STYLE_DASHDOTDOT
//---- indicator line width is equal to 1
#property indicator_width1 1
//---- displaying the indicator label
#property indicator_label1 "MA"
//+--------------------------------------------+
//| Channel drawing parameters |
//+--------------------------------------------+
//---- drawing the levels as lines
#property indicator_type2 DRAW_LINE
#property indicator_type3 DRAW_LINE
//---- selection of levels colors
#property indicator_color2 Red
#property indicator_color3 Red
//---- Bollinger Bands are dott-dash curves
#property indicator_style2 STYLE_DASHDOTDOT
#property indicator_style3 STYLE_DASHDOTDOT
//---- levels width is equal to 1
#property indicator_width2 1
#property indicator_width3 1
//---- display levels labels
#property indicator_label2 "+ATR"
#property indicator_label3 "-ATR"
//+-----------------------------------+
//| Indicator input parameters |
//+-----------------------------------+
input ENUM_MA_METHOD MA_Method=MODE_SMA; // MA smoothing method
input uint MA_Period=20; // MA period
input uint ATR_Period=20; // ATR period
input double Factor=1.5; // Number of deviations
input ENUM_APPLIED_PRICE IPC=PRICE_CLOSE;// Applied price
input int Shift=0; // Horizontal shift of the indicator in bars
input int TriggerCandle = 1;
input bool EnableNativeAlerts = true;
input bool EnableSoundAlerts = true;
input bool EnableEmailAlerts = true;
input bool EnablePushAlerts = true;
input string AlertEmailSubject = "";
input string AlertText = "";
input string SoundFileName = "alert.wav";

datetime LastAlertTime = D'01.01.1970';
int LastAlertDirection = 0;
//+-----------------------------------+
//---- declaration of dynamic arrays that
//---- will be used as indicator buffers
double MA_Buffer[],UpATRBuffer[],DnATRBuffer[];
//---- declaration of integer variables for the indicators handles
int MA_Handle,ATR_Handle;
//---- declaration of the integer variables for the start of data calculation
int min_rates_total;
//+------------------------------------------------------------------+
//| Custom indicator initialization function |
//+------------------------------------------------------------------+
void OnInit()
{
//---- initialization of variables of the start of data calculation
min_rates_total=int(MathMax(MA_Period,ATR_Period));

//---- getting handle of the MA indicator
MA_Handle=iMA(NULL,0,MA_Period,0,MA_Method,IPC);
if(MA_Handle==INVALID_HANDLE) Print(" Failed to get handle of the MA indicator");

//---- getting handle of the ATR indicator
ATR_Handle=iATR(NULL,0,ATR_Period);
if(ATR_Handle==INVALID_HANDLE) Print(" Failed to get handle of the ATR indicator");

//---- set MA_Buffer[] dynamic array as an indicator buffer
SetIndexBuffer(0,MA_Buffer,INDICATOR_DATA);
//---- moving the indicator 1 horizontally
PlotIndexSetInteger(0,PLOT_SHIFT,Shift);
//---- performing the shift of the beginning of the indicator drawing
PlotIndexSetInteger(0,PLOT_DRAW_BEGIN,min_rates_total);
//---- setting the indicator values that won't be visible on a chart
PlotIndexSetDouble(0,PLOT_EMPTY_VALUE,0);
//---- indexing the elements in the buffer as timeseries
ArraySetAsSeries(MA_Buffer,true);

//---- set UpATRBuffer[] and DnATRBuffer[] dynamic arrays into indicator buffers
SetIndexBuffer(1,UpATRBuffer,INDICATOR_DATA);
SetIndexBuffer(2,DnATRBuffer,INDICATOR_DATA);
//---- horizontal shift of the indicators
PlotIndexSetInteger(1,PLOT_SHIFT,Shift);
PlotIndexSetInteger(2,PLOT_SHIFT,Shift);
//---- set the position, from which the indicators drawing starts
PlotIndexSetInteger(1,PLOT_DRAW_BEGIN,min_rates_total);
PlotIndexSetInteger(2,PLOT_DRAW_BEGIN,min_rates_total);
//---- restriction to draw empty values for the indicator
PlotIndexSetDouble(1,PLOT_EMPTY_VALUE,EMPTY_VALUE);
PlotIndexSetDouble(2,PLOT_EMPTY_VALUE,EMPTY_VALUE);
//---- indexing the elements in the buffer as timeseries
ArraySetAsSeries(UpATRBuffer,true);
ArraySetAsSeries(DnATRBuffer,true);

//--- creation of the name to be displayed in a separate sub-window and in a tooltip
IndicatorSetString(INDICATOR_SHORTNAME,"ATR channel");

//---- determination of accuracy of displaying the indicator values
IndicatorSetInteger(INDICATOR_DIGITS,_Digits+1);
//---- initialization end
}
//+------------------------------------------------------------------+
//| Custom iteration function |
//+------------------------------------------------------------------+
int OnCalculate(const int rates_total, // number of bars in history at the current tick
const int prev_calculated,// number of bars calculated at previous call
const datetime &time[],
const double &open[],
const double &high[],
const double &low[],
const double &close[],
const long &tick_volume[],
const long &volume[],
const int &spread[])
{
//---- checking the number of bars to be enough for the calculation
if(BarsCalculated(MA_Handle)<rates_total
|| BarsCalculated(ATR_Handle)<rates_total
|| rates_total<min_rates_total) return(RESET);

//---- declarations of local variables
int limit,to_copy;
double ATR[],atr;

//---- indexing elements in arrays as time series
ArraySetAsSeries(ATR,true);

//---- calculation of the 'first' starting index for the bars recalculation loop
if(prev_calculated>rates_total || prev_calculated<=0) // checking for the first start of the indicator calculation
{
limit=rates_total-min_rates_total-1; // starting index for calculation of all bars
}
else limit=rates_total-prev_calculated; // starting index for calculation of new bars

to_copy=limit+1;

//--- copy newly appeared data in the array
if(CopyBuffer(ATR_Handle,0,0,to_copy,ATR)<=0) return(RESET);
if(CopyBuffer(MA_Handle,0,0,to_copy,MA_Buffer)<=0) return(RESET);

//---- main indicator calculation loop
for(int bar=limit; bar>=0 && !IsStopped(); bar--)
{
atr=Factor*ATR[bar];
UpATRBuffer[bar]=MA_Buffer[bar]+atr;
DnATRBuffer[bar]=MA_Buffer[bar]-atr;
}
//----
return(rates_total);
}
//+------------------------------------------------------------------+

//+------------------------------------------------------------------+
double FindTP(double entry,int direction)
{
double tp,min;
if(direction == UP)
{
min = 10000;
for(int i = ObjectsTotal()-1;i>=0;i--)
{
if(ObjectType(ObjectName(i)) == OBJ_HLINE && StringFind(ObjectName(i),"Red") != -1)
{
if(ObjectGet(ObjectName(i),1) > entry+150*Point && ObjectGet(ObjectName(i),1) < min)
min = ObjectGet(ObjectName(i),1);
}
}
}
if(direction == DOWN)
{
min = 0;
for(int ii = ObjectsTotal()-1;ii>=0;ii--)
{
if(ObjectType(ObjectName(ii)) == OBJ_HLINE && StringFind(ObjectName(ii),"Green") != -1)
{
if(ObjectGet(ObjectName(ii),1) < entry-150*Point && ObjectGet(ObjectName(ii),1) > min)
min = ObjectGet(ObjectName(ii),1);
}
}
}

Hey all, to make it easier to read your code post please place code inside tags: [ ], without the “” quotes like this:

Opening tag: [“code]
...your code...
closing tag: [/“code”]

Updated:
- option to select day-week-month as the previous candle or current
- option to select which/combo of day-week-month candles to show
- cleaned up input page a bit
- works in strategy tester/visual
- another ex4 with a cleaner default to save changing a bunch of stuff if you want a clearer chart

Basically, EA works this way..

When there is price change, it is called tick and it will run Start() function every time.
Since there is no flag to block trade, it will open new trade every time.

Not sure how you want to open/close your order but you need to add that condition/logic to prevent wrong order.

Thank you very much sir. Hopefully the push notifications will work.

this script has this condition:
Hour()==Hour_For_Long_Entry && Minute()>=Minute_For_Long_Entry

so, if Hour is match and Minute is larger than Minute_For_Long_Entry, it will execute buy order.
and set Place_buy to false so it won't buy any more.

if you disable, every min of new tick ( new price change ) will meet this condition and place buy order.

if you don't want to execute this on all tick, you might want to add some condition to check

1) after buy, you should disable "Place_Buy" to false ( that is current conditon )
You might save time to some variable like


2) add some condition/check so it can reset "Place_Buy=true"

Since I don't know what is conditon/check, I can't help.

You might want to check if current bar time is 1hr apart or maybe 1 day apart etc.