Trading FRAMA Ribbon only | Page 8 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Strategy behind 1 EA (buy only) and 1 EA (sell only) 2 replies

Script to change EA to long only/ short only at a price level? 1 reply

Looking for a MACD Ribbon? 6 replies

Kino- T3MA ribbon filled is not appearing on my chart 11 replies

Ribbon dance 273 replies

Attachments: Trading FRAMA Ribbon only
Exit Attachments

Trading FRAMA Ribbon only

  • #141
  • Nov 12, 2019 7:38am Nov 12, 2019 7:38am
Quoting JoeeF
{quote} It's interesting to see how people are trying different ways of trading. Anyway, please be careful. As I said I never tested my EA on Renko charts.
Sorry, looks like JFHullMA_EA doesn't really work on Renko charts.

A theory :
I have different EA (Margin Trader) running in separate charts for same pairs as the Renko pairs.
JFHullMA (Mode A) on Renko charts looks like it was operating from the M1 feed and ignored the Renko M3.
All the BUY trades were with the JFHullMA magic number.
Here is the interesting thing... the first JFHullMA signal seems to have triggered the Margin Trader EA.
Margin Trader EA seems to have taken over, trading in one direction, and kept using JFHullMA to open more trades as margin freed up.
Lucky coincidence I looked at the GU chart right as the price spike occurred.
But, more interesting, the same thing happened again with EJ trades. JFHullMA triggered Margin Trader and Margin Trader kept opening trades using JFHullMA.
It too would have been very profitable - only I wasn't awake when the 172 pips jump happened.
It could have been another large profit with 172 pips on approximately 220 trades of 0.1 lots.
Currently, EJ is in drawdown. Waiting to see if goes into profit.

Don't know if this is even possible for one EA to open trades using another EA.
Thanks Joe for a very interesting set of EAs.
Perfidious Pips
  • #142
  • Nov 12, 2019 7:45am Nov 12, 2019 7:45am
Quoting northwind
Sorry, looks like JFHullMA_EA doesn't really work on Renko charts.
No problem. That EA haven't been developed for Renko charts or tested on them.
And you will leave pain to take care of itself.
  • #143
  • Nov 12, 2019 7:53am Nov 12, 2019 7:53am
Quoting JoeeF
{quote} No problem. That EA haven't been developed for Renko charts or tested on them.
By the way. Every my EA is strictly checking magic number. Never will touch of the position or order that doesn't belong to it.
And you will leave pain to take care of itself.
  • #144
  • Nov 12, 2019 8:16am Nov 12, 2019 8:16am
Quoting JoeeF
{quote} By the way. Every my EA is strictly checking magic number. Never will touch of the position or order that doesn't belong to it.
Here is a section of the log file for JFHullMA_GU_M3 at the time it started trading 0.10 lots.
Magic number on trades 444014 but EA log shows errors.
If the JFHullMA EA didn't open the trades a different EA had taken over and opened BUY trades using bogus magic number.
Attached Image (click to enlarge)
Click to Enlarge Name: Image1.png Size: 88 KB
Perfidious Pips
  • #145
  • Nov 12, 2019 8:19am Nov 12, 2019 8:19am
Same thing with different pair EJ.
JFHullMA EA has over 220 BUY trades made with its magic number.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Image1.png Size: 89 KB
Click to Enlarge Name: Image2.png Size: 83 KB
Perfidious Pips
  • #146
  • Nov 12, 2019 9:27am Nov 12, 2019 9:27am
Quoting northwind
{quote} Here is a section of the log file for JFHullMA_GU_M3 at the time it started trading 0.10 lots. Magic number on trades 444014 but EA log shows errors. If the JFHullMA EA didn't open the trades a different EA had taken over and opened BUY trades using bogus magic number. {image}
Quoting northwind
Same thing with different pair EJ. JFHullMA EA has over 220 BUY trades made with its magic number. {image} {image}
Dear John,
I think it would be better not using my EA on Renko charts. At least for now. My framework haven't been developed or tested for Renko charts. At least for now.

And for now I haven't energy and time to support Renko charts.
And you will leave pain to take care of itself.
  • #147
  • Nov 12, 2019 10:35am Nov 12, 2019 10:35am
Quoting JoeeF
{quote} {quote} Dear John, I think it would be better not using my EA on Renko charts. At least for now. My framework haven't been developed or tested for Renko charts. At least for now. And for now I haven't energy and time to support Renko charts.
Fully agree.
Already removed EA and closed all Renko charts.
Now focused on JF4XTRADER testing.
Perfidious Pips
  • #148
  • Feb 23, 2020 12:01pm Feb 23, 2020 12:01pm
First let me say great work and thank you for this great work.
I downloaded the file and went through the user guide. i might be doing something wrong but the pictures below are the things i observed.
1. There was no typo between the xlm file and the config file from the expert ea

2. I put the files in the proper folders

3. i downloaded the fama ribbon and put it in the indicators folder

yet i am still experiencing error.

Simply put, the troubleshooting is not working for me.

Also there was no mention on how to use the Hull moving average
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Screenshot_2.png Size: 10 KB
Click to Enlarge Name: Screenshot_3.png Size: 34 KB
Click to Enlarge Name: Screenshot_7.png Size: 54 KB
Attached Image
  • #149
  • Feb 23, 2020 9:08pm Feb 23, 2020 9:08pm
Quoting Vickson64
First let me say great work and thank you for this great work. I downloaded the file and went through the user guide. i might be doing something wrong but the pictures below are the things i observed. 1. There was no typo between the xlm file and the config file from the expert ea 2. I put the files in the proper folders 3. i downloaded the fama ribbon and put it in the indicators folder yet i am still experiencing error. Simply put, the troubleshooting is not working for me. Also there was no mention on how to use the Hull moving average {image}...
Hi Vickson,

Joe has provided two separate EAs in this thread.
Are you trying to run the FRAMA_EA or the HULLMA_EA?

FRAMA EA:
Installation:
1) Put indicator (frama ribbon 1.1 (arrows).ex4) in indicators folder: \MQL4\Indicators
2) Put EA (JFFramaRibbon.ex4) in experts folder: \MQL4\Experts
3) Put XML config (JFFramaRibbon.xml) in common files folder: \MetaQuotes\Terminal\Common\Files
(If someone isn't able to locate common files folder please look here.)


HULLMA EA:
Installation:
1) Put indicator (Hull moving average.ex4) in indicators folder: \MQL4\Indicators
2) Put EA (JFHullMA.ex4) in experts folder: \MQL4\Experts
3) Put XML config (JFHullMA.xml) in common files folder: \MetaQuotes\Terminal\Common\Files
(If someone isn't able to locate common files folder please look here.)

That's it.

NW
Perfidious Pips
  • #150
  • Feb 23, 2020 11:22pm Feb 23, 2020 11:22pm
Quoting northwind
{quote} Hi Vickson, Joe has provided two separate EAs in this thread. Are you trying to run the FRAMA_EA or the HULLMA_EA? FRAMA EA: Installation: 1) Put indicator (frama ribbon 1.1 (arrows).ex4) in indicators folder: \MQL4\Indicators 2) Put EA (JFFramaRibbon.ex4) in experts folder: \MQL4\Experts 3) Put XML config (JFFramaRibbon.xml) in common files folder: \MetaQuotes\Terminal\Common\Files (If someone isn't able to locate common files folder please...
Thanks for your reply. I have removed the frama in the indicators folder and replaced it wil Hull yet the errors still occur as above. I went through the troubleshooting process again and everything seems to be where they ought to be but still not working. Any other suggestions?
  • #151
  • Feb 25, 2020 6:55am Feb 25, 2020 6:55am
Quoting Vickson64
{quote} Thanks for your reply. I have removed the frama in the indicators folder and replaced it wil Hull yet the errors still occur as above. I went through the troubleshooting process again and everything seems to be where they ought to be but still not working. Any other suggestions?
cfudge has a thread which has the latest FRAMA EA and trading enhancements.
Please check here:
www.forexfactory.com/showthread.php?t=950665
All the best,
NW
Perfidious Pips
  • #152
  • Feb 25, 2020 3:10pm Feb 25, 2020 3:10pm
Quoting JoeeF
{quote} No problem. That EA haven't been developed for Renko charts or tested on them.
Hi
Is it possible to get the code for the FRAMA EA?
I want to try something
  • #153
  • Mar 14, 2020 5:07am Mar 14, 2020 5:07am
Quoting mgesh
{quote} Hi Is it possible to get the code for the FRAMA EA? I want to try something
I'm not sharing source codes. I'm sorry. There is no reason to do it especially here on FF.

Regards
And you will leave pain to take care of itself.
  • #154
  • Mar 14, 2020 5:11am Mar 14, 2020 5:11am
Quoting northwind
{quote} Hi Vickson, Joe has provided two separate EAs in this thread. Are you trying to run the FRAMA_EA or the HULLMA_EA? FRAMA EA: Installation: 1) Put indicator (frama ribbon 1.1 (arrows).ex4) in indicators folder: \MQL4\Indicators 2) Put EA (JFFramaRibbon.ex4) in experts folder: \MQL4\Experts 3) Put XML config (JFFramaRibbon.xml) in common files folder: \MetaQuotes\Terminal\Common\Files (If someone isn't able to locate common files folder please...
Thank you for helping me ...

Regards
And you will leave pain to take care of itself.
  • #155
  • Mar 14, 2020 5:14am Mar 14, 2020 5:14am
Quoting Vickson64
First let me say great work and thank you for this great work. I downloaded the file and went through the user guide. i might be doing something wrong but the pictures below are the things i observed. 1. There was no typo between the xlm file and the config file from the expert ea 2. I put the files in the proper folders 3. i downloaded the fama ribbon and put it in the indicators folder yet i am still experiencing error. Simply put, the troubleshooting is not working for me. Also there was no mention on how to use the Hull moving average {image}...
Simply follow steps John has shown you ...

Regards
And you will leave pain to take care of itself.
  • #156
  • Mar 14, 2020 5:21am Mar 14, 2020 5:21am
Quoting JoeeF
{quote} Simply follow steps John has shown you ... Regards
well I tried to - on a Linux machine - never got your EA to work.
I'd be very interested in the strategy - but without a sensible working EA it simply takes up too much time to do the backtesting.
I find it pretty arrogant that you complain about the unreliability of FF-users but are unwilling to provide a straightforward EA that can simply be used like the x-thousand other EAs in circulation.
But that's only me, I'm sure.
You and Northwind will start other "projects", make a fuss, abandon them a week later - and continue complaining about the "losers" who can't get your brilliant output to work.
  • #157
  • Mar 14, 2020 5:31am Mar 14, 2020 5:31am
Quoting josi
{quote} well I tried to - on a Linux machine - never got your EA to work. I'd be very interested in the strategy - but without a sensible working EA it simply takes up too much time to do the backtesting. I find it pretty arrogant that you complain about the unreliability of FF-users but are unwilling to provide a straightforward EA that can simply be used like the x-thousand other EAs in circulation. But that's only me, I'm sure. You and Northwind will start other "projects", make a fuss, abandon them a week later - and continue complaining about the "losers" who can't get your brilliant output to work.
It's so easy. Take it or let it be ...

And yes, in spare time I can clean the floor in your house ... LOL
And you will leave pain to take care of itself.
  • #158
  • Mar 14, 2020 5:53am Mar 14, 2020 5:53am
Quoting JoeeF
{quote} It's so easy. Take it or let it be ... And yes, in spare time I can clean the floor in your house ... LOL

You criticize others but can't tolerate criticism.
What a cretinous move to put me on the ignore list....
  • #159
  • Mar 16, 2020 4:32am Mar 16, 2020 4:32am
Quoting JoeeF
{quote} I'm not sharing source codes. I'm sorry. There is no reason to do it especially here on FF. Regards
Okay.
Is it possible to interchange sell stops with a buy limit, sell limits with buy stops, buy limit with sell stops, and buy stops with sell limit?
I was backtesting GBPUSD and I noticed, if the EA took the opposite position from what it has been coded to do, it might be profitable.
  • #160
  • Jul 17, 2020 3:47am Jul 17, 2020 3:47am
Hi..
Brilliant EA..

I have been trading with TDI for some time with god profit on the higher time Frame. Is it possible to implement TDI to this EA. Buy when signal Line is crossing 45 degrees or more and vice versa for sell.. And only in over bought and sell territory..
If possible you Will have a winner especialy 1H and 4H time Frame..

cheers James
0 traders viewing now