Micro martingale with small capital | Page 214 | Forex Factory

Options

Go to
Permalinks
Print Thread

Related Instruments

EUR/USD

Similar Threads

Martingale, Anti-martingale, and Compounding 40 replies

Martingale, Reverse Martingale, Modified Martingale, Maths 1 reply

Martingale Calculation EA (also reverse martingale) 3 replies

How to change this Martingale to Reverse Martingale ? 3 replies

Martingale vs. Non Martingale (Simplified RoR vs Profit) 1 reply

Attachments: Micro martingale with small capital
Exit Attachments

Micro martingale with small capital

  • #4,261
  • Jun 26, 2019 1:33pm Jun 26, 2019 1:33pm
Quoting ohleclaire
Is that the set-File? Parameters==== Default Setting Optimized for Leverage 1:500 === MaxSpread=1.50000000 MaxSpread,F=0 MaxSpread,1=1.50000000 MaxSpread,2=0.00000000 MaxSpread,3=0.00000000 MaxSlipage=4 MaxSlipage,F=0 MaxSlipage,1=4 MaxSlipage,2=0 MaxSlipage,3=0 Magic_Number_=1994 Magic_Number_,F=0 Magic_Number_,1=1994 Magic_Number_,2=0 Magic_Number_,3=0 Note= ................
Setfile cannot be opened with Notepad, unless you rename it with the Dos command to * .Txt.
Just open it from the Strategy tester
margiyono61 gmail com, Telegr @Margiyono
  • #4,262
  • Jun 27, 2019 1:39am Jun 27, 2019 1:39am
Anyone still working on ver9. it stops in gbpusd backtest.
  • #4,263
  • Jun 27, 2019 2:14am Jun 27, 2019 2:14am
the file does not change the settings as it is an optimization file.
so i opened it with my editor.

of course i can open and read the file.
thx
  • #4,264
  • Jun 27, 2019 3:13am Jun 27, 2019 3:13am
Quoting mrgmrg
Guys The following is a setfile example for V1_10_2, with BT period Jan-May 2019 Please make a decision to make it better Test the M1 timeframe {image} {image} {file}
if i only had the balls to run pass 5, but it is true i would only loose 1000$
  • #4,265
  • Jun 27, 2019 8:13pm Jun 27, 2019 8:13pm
Low DD and Low profit
From the default parameter, then change Grid_pause_AutoTrend = true and Double_Order = true.
Works on the M1 timeframe
Attached Image (click to enlarge)
Click to Enlarge Name: Capture143.PNG Size: 52 KB
margiyono61 gmail com, Telegr @Margiyono
  • #4,266
  • Jun 28, 2019 4:07am Jun 28, 2019 4:07am
Quoting mrgmrg
{quote} For normal martingale, with a $ 100 ECN account it might be difficult, but for Cent accounts it's flexible to use several sets of files on pages 208 and 210. But try with the attached Scalper setfile (with short SL) {file}
Hi MRg,
the set file has signal 7.

isn't a level too high for a scalper setting?

Thanks
  • #4,267
  • Jun 28, 2019 4:14am Jun 28, 2019 4:14am
Quoting Ironshirow
{quote} Hi MRg, the set file has signal 7. isn't a level too high for a scalper setting? Thanks
Hi Dv,
Yes Scalper setfile.
for decrease loss, change Max_Open_first order=3 and max open increment=1
margiyono61 gmail com, Telegr @Margiyono
  • #4,268
  • Jun 29, 2019 7:45pm Jun 29, 2019 7:45pm
Guys
With the default parameter and change Grid_pause_AutoTrend = true and Double_Order = true, actually it is already profit and avoid MC.
But the results are small, because it is only able to use a small Margin_Percent.

Only ideas:
I try to add the DD_Pause Release (in percentage) option, to hold the marting transaction but the other transactions still work (eg buy marting is held, but sell is not held)
With that condition, the Margin_Percent can be increased more and the results can change from around 200% to around 800% (in 5 months).

If you have ideas or suggestions, please submit.

Rgds
margiyono61 gmail com, Telegr @Margiyono
  • #4,269
  • Jun 29, 2019 8:40pm Jun 29, 2019 8:40pm
Quoting mrgmrg
Guys With the default parameter and change Grid_pause_AutoTrend = true and Double_Order = true, actually it is already profit and avoid MC. But the results are small, because it is only able to use a small Margin_Percent. Only ideas: I try to add the DD_Pause Release (in percentage) option, to hold the marting transaction but the other transactions still work (eg buy marting is held, but sell is not held) With that condition, the Margin_Percent can be increased more and the results can change from around 200% to around 800% (in 5 months). If you...
Sorry, it turned out that without adding a feature there was a solution to increase growth by changing Grid_Release (default 6, for example changed to 12 or other)
margiyono61 gmail com, Telegr @Margiyono
  • #4,270
  • Jun 30, 2019 8:09am Jun 30, 2019 8:09am
Guys

V1_11 has been released on page 1

Rgds
margiyono61 gmail com, Telegr @Margiyono
  • #4,271
  • Jul 1, 2019 2:04am Jul 1, 2019 2:04am
Quoting mrgmrg
{quote} Hi Dv, Yes Scalper setfile. for decrease loss, change Max_Open_first order=3 and max open increment=1
Ho Mrg,
Sorry but I can't find max open First order

Can you help me?

Thanks
  • #4,272
  • Jul 1, 2019 2:16am Jul 1, 2019 2:16am
Quoting Ironshirow
{quote} Ho Mrg, Sorry but I can't find max open First order Can you help me? Thanks
At top parameters (default 1)
Attached Image
margiyono61 gmail com, Telegr @Margiyono
  • #4,273
  • Jul 1, 2019 2:34am Jul 1, 2019 2:34am
Quoting mrgmrg
{quote} At top parameters (default 1) {image}
i put the new version and the scalper set to the test on my demo......... will update
  • #4,274
  • Jul 1, 2019 2:39am Jul 1, 2019 2:39am
Quoting fabio.g
{quote} i put the new version and the scalper set to the test on my demo......... will update
Note, Setfile attch optimize for GU, maybe for other pair need litle adjusment
margiyono61 gmail com, Telegr @Margiyono
  • #4,275
  • Jul 1, 2019 2:44am Jul 1, 2019 2:44am
Quoting mrgmrg
{quote} Note, Setfile attch optimize for GU, maybe for other pair need litle adjusment
no worries mate, it is on gu m1. btw how do you manage to optimise so quickly
  • #4,276
  • Jul 1, 2019 3:35am Jul 1, 2019 3:35am
Basically to reduce DD, it is done in two ways:
1. Activate Grid_pause_Auto_rend = true and simply use a single grid (eg 9, 15, etc)

2. Disable the Grid_pause_AutoTrend parameter but use Multi Grid with the format naabbccdd (max 4 levels), for example 90930, 9092030, 9092050, 909092050, and many combinations
"909092050" the meaning is
the first 9 digit number shows Multi Grid,
number 09 ==> Grid length in the range 0-30 pips
number 09 ==> Grid length in the range of 30-60 pips
number 20 ==> Grid length in the range 60-90 pips
number 50 ==> Grid length in the range> 90 pips

In the example setfile A01-A08 use option number 1.

Please try with option number 2, with this condition the smaller DD is around 7-25%
margiyono61 gmail com, Telegr @Margiyono
  • #4,277
  • Jul 1, 2019 3:52am Jul 1, 2019 3:52am
About Optimized.
Maybe someone has used it, but if anyone hasn't tried it, it can be seen in the picture below.
Example: Grid optimization from range 5 to 15, the best results are in the Optimization Result

All parameters can be Optimized one by one
Attached Image (click to enlarge)
Click to Enlarge Name: Capture149.PNG Size: 61 KB
margiyono61 gmail com, Telegr @Margiyono
  • #4,278
  • Jul 1, 2019 4:22am Jul 1, 2019 4:22am
Quoting mrgmrg
Basically to reduce DD, it is done in two ways: 1. Activate Grid_pause_Auto_rend = true and simply use a single grid (eg 9, 15, etc) 2. Disable the Grid_pause_AutoTrend parameter but use Multi Grid with the format naabbccdd (max 4 levels), for example 90930, 9092030, 9092050, 909092050, and many combinations "909092050" the meaning is the first 9 digit number shows Multi Grid, number 09 ==> Grid length in the range 0-30 pips number 09 ==> Grid length in the range of 30-60 pips number 20 ==> Grid length in the range 60-90 pips number 50 ==> Grid...
Ok V1_11 I have uploaded it again along with 19 setfiles at Page 1
margiyono61 gmail com, Telegr @Margiyono
  • #4,279
  • Jul 1, 2019 5:45am Jul 1, 2019 5:45am
Quoting mrgmrg
{quote} Ok V1_11 I have uploaded it again along with 19 setfiles at Page 1
Thanks MRG!
  • #4,280
  • Edited 12:22pm Jul 2, 2019 9:52am | Edited 12:22pm
The strength of the setfile type "A02 DO"

By using the parameter functions in the setfile, Grid 5-10 is able to handle any currency pair.
Although growth is relatively small at around 120-300% in 5 months per currency, DD is around 15-40%
Maybe DD can still be reduced by adjusting other parameters.

If anyone tries unsuccessfully, we discuss looking for causes and solutions.
Attached Image (click to enlarge)
Click to Enlarge Name: Capture150.PNG Size: 64 KB
margiyono61 gmail com, Telegr @Margiyono
3 traders viewing now