EA31337 released for free

Thanks kenorb .

I actually come across the name 'EA31337' by accident when searching for EA builder long while ago. I remembered it because, it did appears that many discussion about this EA has been extremely positive. I was trying to understand how the EA works but there was little details, however, there are plenty websites out there trying to sell EA with this name. Then I start prowling the FF forum.....there you are..

Never bought anything but certainly 31337 left a good mark. There were other ones, again only numbers. Thank you again for sharing this out and explanation. I'll test the EA and report back. I think backtesting EA only gives as much, but forward testing is the real confidence building session.

Subscribed!

Thanks for EA. Probably stupid suggestion, but I tried it manually and it had some sense...Just I do not like to sit and watch my monitor all day long. I think it could be 10 min job for a good coder... Take v. 1072 EA and code it to open trades only in direction of 30 min TF half-trend indicator or any other reliable trend indi. Close trades when indi changes direction. Add only this one thing and leave all others as they are. Something like that.

You don't need coding, EA got parameterized condition-action system, so you can setup action to close trades on the direction change. But I don't think many people tried that. Many people suggest something without realizing it's already there.
So basically using actions, you can setup closure of the trades (such as all, only the one with the trend, or against the trend, or losing once, or profitable, or whatever group you choose), on the indicator change value such as Moving Average Fast is going opposite direction to Slow one, or any other market event condition (on a buy or sell signal of any supported indicator such as RSI, or 28+ of other).
Please test and let me know if this is what you're looking for.

Thanks for reply. Closure of the trades is only a part of the question. Probably this is my fault, because I could not find how to change the main trend detection setting. It should be more sensitive. Under the main trend I mean the one that is shown on the chart. I have noticed that it continues to show previous trend direction and EA opens new countertrend orders even hours after the trend has changed. And this causes terrible losses. That is why I came with simple solution to use half-trend M30 as trend indi. It reacts almost perfect to trend change.
I have read about the EA settings, but could not find an answer about how to change the main trend settings. And again, sorry, probably this is my fault.

For changing trend detection sensitivity, you need to optimize TrendMethod param for v1.072, or TrendPeriod in v1.075 (based on RSI). Related posts #178-#180, #189, #197 (2nd part).
In v1.072, when optimizing TrendMethod param, you're basically changing the sensitivity on the timeframe basis, so you're basically telling EA which timeframe should get the higher priority to tell about the main trend (check GetTrend() in Trend class for logic).
In v1.075, the trend is based on the RSI and uses params such as: TrendPeriod (the main param), RSI_Period and RSI_Applied_Price (uses some values from RSI strategy) to calculate the trend strength between -0.5 and 0.5 where range between -0.1 and 0.1 is considered the neutral trend (no trades), and value below or above 0.3 is considered as the strong trend, so you're in full control how sensitive is the trend detection.

Ok, I will try, thanks.

Ok Guys I will start will a real Account with 200$ in the XM Broker in July. I'm doing this for a gain for 5% - 10% monthly. I read all the thread and I will go with the last version. I will give a feedback weekly to see how to tune and see how is working with a Real Account! For last thanks for this EA.

hey chrisdk2017

any updates on this demo?

thanks, blam

Thanks @Kenorb for the Ea, i had a few questions that you might be able help on.

I understand that the EA learns the longer it has been active on the pair , so presumably if i wanted to switch it on or off when i perceived the market to be in the most optimum place (ie trending), presumably stopping and starting would only mess up all the settings?

what about if i reached a point like 20% increase in equity halfway through the month and i wanted to stop trading , could i use the account condition "suspend all strategies" , and would it then mess up the settings (what the EA has learned) when i revert to "UNsuspend all stategies " (presumably all other params are set to "none" )

Have you ever tested this on either Range or Renko bars?

I have tried V1.072 with great results over the last few days in a trending market closing basket manually,interested to see its performance in consolidation. (also tried V.1073 but it didnt make any trades in 3 days.

It only opens 0.01 orders and always at a loss.

The version v1.072 was optimized very long time ago, and market conditions changes every year, and further versions I've confirmed them broken.

However, finally I've manage to release the new version v1.076 which you can find at https://github.com/EA31337/EA31337/releases

Also attached here: .

I didn't have time to test it on demo, my main focus was to produce good optimization results for 2018, so I've no idea how it performs on demo accounts. What I know, it generates a lot of trades, so please use it with caution.

Note: Use this version only against EURUSD pair with accounts with spread lower than 10, as this is what it was optimized for. If you've account with higher spreads, try on the demo first, but it's better to wait for further releases which can improve support for higher spreads, otherwise you can try to disable some lower-timeframe strategies. It was also tested with deposit of 10k USD, if you've lower deposit, please also test it on demo first for couple of weeks if it can adjust to your market conditions and current account balance.

Suggested run:
- Timeframe M30 or M15, but it really shouldn't make any difference.
- EURUSD with spread 10 or lower.
- Default settings.

Here are the results for EURUSD 2018 with spread 10:



Note: The reason why it's not curved to the end is, because it was only optimized for the first 6 months due to huge amount of computation involved while optimizing parameters, so dealing with the unknown data on the 2nd half of the year which was never optimized for is actually pretty well in my opinion.

I've created EA Tester scripts which you can easily backtest EA with a single command.

After installing Docker (should work for Windows, macOS and Linux), you can run the following command in your operating system command-line terminal:


Here is the recorded terminal demo how the backtesting using Docker is performed: https://asciinema.org/a/233268 (press play button after clicking).

I haven't tested it for 2019, so please let me know. For any bugs you find, please report them at GitHub. We've also group at Telegram IM at https://t.me/EA31337 if you need any quicker response, as I'm not very active on this forum. I'm usually replying the private messages here after couple of months later as the interface is not very intuitive, sorry Also, to let you know, I don't look for any work or projects to work on (other indicators or EAs), as I've received couple of messages like that.

If you'd like to compile the project or read more about it, please check the following wiki pages.

I'm planning to release further improved versions soon which can definitely beat the above results.

Hello, I do not drag on the chart writes
2019.03.12 21:20:19.385 'EA31337-Lite-v1.076' is not expert and cannot be executed help solve the problem

What platform version you're using? Do you use the latest MT4?

Anybody else got similar issue?

yes last mt4

me too

I think it's a MT4 platform bug, as it works when backtesting, the problem is when attaching to the chart. Somebody should report it as a bug to MT4 support (they've removed my accounts for no reason, so I can't). It was compiled using MetaEditor 5.0.0.1966.

Anyway, I've recompiled it again, and this version should work: https://github.com/EA31337/EA31337/r...ite-v1.076.ex4

Thanks, this works

Hi Kenorb,

Do you have a set file or setting you used in back test or do we suppose to just run it on default ?

Regards,

Singh

Hi Buddy
I can't find Telegram group, it doesn't exist!
Also i'm going to try Docker! i don't know what it is! hope i can cope it.

Thanks
Green Pips

The backtest is using default settings, so please use the default one.