Casino EA Trader | Page 177 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

$4 Trillion Gambling/Casino Everyday 1 reply

Doubling up method or playing casino 24 replies

casino journal 3 replies

Casino Forex 4 replies

Welcome To Casino ! 3 replies

Attachments: Casino EA Trader
Exit Attachments

Casino EA Trader

  • #3,521
  • Edited 3:54pm Feb 7, 2019 3:43pm | Edited 3:54pm
Here is that M30 Market Basket with the M30 HM filter, it is still running. You can see it had that same big pull back as the H1 did but took a bigger dollar hit in DD than the H1 did that I showed previously.

I just added a manual TSL to the chart as I feel it is pulling back.

Attached Image (click to enlarge)
Click to Enlarge Name: Example_1.gif Size: 62 KB
  • #3,522
  • Feb 7, 2019 3:47pm Feb 7, 2019 3:47pm
Here is one I just entered a short trade in manually with the HM H1 filter active in the DB.

I took it because of the way the chart looks, there is no auto signal present at this time.

I also put on a manual TP and SL on the chart.

By leaving the "Sell All" button turned on it keeps short arrows live in the DB so if any more HM Filter trades appear that agree with the arrows they will be taken.

Attached Image (click to enlarge)
Click to Enlarge Name: Save_2.gif Size: 137 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Save_1.gif Size: 61 KB
  • #3,523
  • Feb 7, 2019 4:16pm Feb 7, 2019 4:16pm
A quick update on my basket setup.
Just letting it run and see where it takes me but I am starting to lose track of the baskets and trade direction.
If you look at the actual chart it seems easy picking but in all honesty I have no idea where trades have been placed.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot 2019-02-07 16.47.52.png Size: 93 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot 2019-02-07 16.49.00.png Size: 110 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot 2019-02-07 16.49.32.png Size: 65 KB
  • #3,524
  • Edited Feb 8, 2019 1:32pm Feb 7, 2019 7:15pm | Edited Feb 8, 2019 1:32pm
Dear Eugene and Traders.
It is the result of the trade yesterday.
On the other hand, I was surprised.
Eugene is doing basket trading with F60 filter, HAS, SWING, SEMA and trend line.
I use the F60 filter on the 30 minute chart but I only use Swing and SEMA signals.
If you look at the chart, it looks like a davit trade.
My one of strategy is pivot lines and trends and I like the sema signal.
Assuming that there is support and resistance near the pivot line
Where do I get the swing and sema signals.
So I avoid the signal coming from the space between the support and the resistance.
If there is a trend and I would like to give a signal near the pivot line.
I think it would be understandable if the swing and the sema are repainting near the pivot line because it is natural to go for support and resistance.
What do you think?
Best regards.


Attachment g
Attachment g
Attached Image(s) (click to enlarge)
Click to Enlarge Name: GBP shot dashboard.jpg Size: 455 KB
Click to Enlarge Name: GBP shot GBPAUD end.jpg Size: 461 KB
  • #3,525
  • Edited 9:13am Feb 8, 2019 7:51am | Edited 9:13am
Quoting seller9
It may be a while before the next version comes out as I am trying different ideas to make it better and eliminating things that don't pan out. So if you have any ideas I am all eyes and ears that will make us some money. LOL
Hi Gene, would it be sensible or possible to add an additional/optional parameter to the DB settings ( let's say value of 0-100) which refers to current snapshot % gap between the sell/buy market condition to act as a filter for entering trade ie only execute on TS signal so long as current % gap between buy & sell %s exceeds the parameter value? Thanks
  • #3,526
  • Feb 8, 2019 9:31am Feb 8, 2019 9:31am
Quoting JustUncleL
Here is the GBP pairs Basket Yesterday using HAS+HAS2+BO, in an attempt to trade the Pullback recoveries with the main trends: {image} {image} Nearly picked up a bigger run, but the EL gap was not wide enough to capture it.
Hi JustUncleL as I'm also running couple of HAS/HAS2/BO tests on parallel to HSS could I just check with you the below settings (which performed very well in terms of EQ and DD) also matches your recent setups? Thanks a lot
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 10 HAS HAS2 BO AUD H1 EL51 2.gif Size: 229 KB
Click to Enlarge Name: 10 HAS HAS2 BO AUD H1 EL51.gif Size: 147 KB
  • #3,527
  • Feb 8, 2019 12:53pm Feb 8, 2019 12:53pm
Quoting seller9
Here is one I just entered a short trade in manually with the HM H1 filter active in the DB. I took it because of the way the chart looks, there is no auto signal present at this time. I also put on a manual TP and SL on the chart. By leaving the "Sell All" button turned on it keeps short arrows live in the DB so if any more HM Filter trades appear that agree with the arrows they will be taken. {image} {image}
Hi Gene, sorry another one for you. Not sure why this potential short did not trigger today; guess it was related to Semafor not forming? Thanks
Attached Image (click to enlarge)
Click to Enlarge Name: MARKT28H12.gif Size: 104 KB
  • #3,528
  • Feb 8, 2019 1:25pm Feb 8, 2019 1:25pm
Quoting JimmyPark
Dear Eugene and Traders. It is the result of the trade yesterday. On the other hand, I was surprised. Eugene is doing basket trading with F60 filter, HAS, SWING, SEMA and trend line. I use the F60 filter on the 30 minute chart but I only use Swing and SEMA signals. If you look at the chart, it looks like a davit trade. My one of strategy is pivot lines and trends and I like the sema signal. Assuming that there is support and resistance near the pivot line Where do I get the swing and sema signals. So I avoid the signal coming from the space between...
Hello Gene and traders.
Here is the result of the trade.
I have let him do automatic trading so far, but I do not like to pass the week, so I manually closed the last trade.
I have been testing from casino to S9_v7 but it was the most satisfactory result.
I hope it will be included in the next version.
It is considered possible to use up to TP by using the area that overlaps the pivot line plus RND Num as the signal zone.
Thank you for your effort Gene.
Best regards.
Attached Image (click to enlarge)
Click to Enlarge Name: dashboard 1.jpg Size: 396 KB
  • #3,529
  • Feb 8, 2019 5:05pm Feb 8, 2019 5:05pm
Quoting JimmyPark
{quote} Hello Gene and traders. Here is the result of the trade. I have let him do automatic trading so far, but I do not like to pass the week, so I manually closed the last trade. I have been testing from casino to S9_v7 but it was the most satisfactory result. I hope it will be included in the next version. It is considered possible to use up to TP by using the area that overlaps the pivot line plus RND Num as the signal zone. Thank you for your effort Gene. Best regards. {image}
Can you spell it out to me in pictures and words as to just what you are doing.

I have a thick head and it takes a big hammer to get through at times.

The TS needs to know exactly what to do if it is to be automated and specific numbers where areas of interest are.

Also, would it be fully auto or some of both?

Thanks
  • #3,530
  • Feb 8, 2019 6:23pm Feb 8, 2019 6:23pm
Quoting fairtraderuk
{quote} Hi JustUncleL as I'm also running couple of HAS/HAS2/BO tests on parallel to HSS could I just check with you the below settings (which performed very well in terms of EQ and DD) also matches your recent setups? Thanks a lot {image} {image}
Yes that is basically what I setup, the only difference is I change the HAS1 settings a bit sometimes to give a slightly smoother HAS curve. Currently I'm trially HAS(3,2,2,3), but that is up to you.
  • #3,531
  • Feb 8, 2019 6:28pm Feb 8, 2019 6:28pm
Quoting JustUncleL
{quote} Yes that is basically what I setup, the only difference is I change the HAS1 settings a bit sometimes to give a slightly smoother HAS curve. Currently I'm trially HAS(3,2,2,3), but that is up to you.
Ok thanks will take that into account Cheers
  • #3,532
  • Feb 8, 2019 7:24pm Feb 8, 2019 7:24pm
WOW! What a week! So Monday night I was playing around with some "what if that would be fun" settings when my wife started having early contractions. So I left everything mid toying around to go have a fantastic experience. From time to time I was able to check MT4 on my phone to wonder about my different setups but did not bring any work or other trading tools with me so was unable to change any settings, some things are more important. Here is what I came back to, and thoughts.

Oh! Healthy Boy by the way

Open Asia start trading session; close trading session NY open; HASe c3232 SWGex4 All 28 individuals Stop after 1 hit a positive 120 pips.
- Each day I checked this one I wished I knew how to make this set up
A. Close all at a chosen time of day (for this setup would be NY open)
B. Restart a new "stop after 1" with all same settings at chosen time of day (Asia Open). Sort of like Go at profit but you could tell it when to fire back up for the next Stop after 1.

Other two I abandoned on Monday evening.

15 Min All 28 individual I left open.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot3.png Size: 220 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot4.png Size: 133 KB


5 min using heat map I left open.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot5.png Size: 234 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot6.png Size: 113 KB


I am usually a 4hr+ time frame sort of person and was having fun with these little guys before my unexpected departure. Both got me wishing I turned on opposite trades with go at profit and an EL

So far my testing with using heat map as a filter has not worked as much as I would like.

I think a better option would be having a moving average filter you could fiddle with. If such filter were to be applied in the TS I would use 5 EMA shift +2 smoothed applied to close and maybe an angle of attack on how steep the line is to determine direction. However those settings would surly change over time.
  • #3,533
  • Feb 8, 2019 8:01pm Feb 8, 2019 8:01pm
Quoting seller9
It may be a while before the next version comes out as I am trying different ideas to make it better and eliminating things that don't pan out. So if you have any ideas I am all eyes and ears that will make us some money. LOL
Yes Please

First of all thanks for all of your creativity, programming skills, and your positive attitude towards building an informational forum for learning and sharing, unfortunately this is seldom found anywhere.

I originally found this thread due to a rabbit hole I fell down reading the original BigE TMS forum. Really love his positive personality and his system. After success using his broken down TDI indicator on the 4hr (London)/1hr(NY) I started looking into automating it. This lead me to the attached EA/TS I believe you created a while back. I have attempted to make it work with your new 28 dashboard however (as expected) could not get it to work.

My idea for the addition to the next basket trader TS is not really my idea at all, just a reincorporation of an old idea that has been around for a while. Would love to see the settings from V12 or later for TDI included onto the next basket TS. I think the trouble would be there are so many settings in V19 it would overwhelm the basket TS setting. V12 has everything we really need and could maybe be slimmed down a bit.

Anyhow just food for thought, if you already have this somewhere that works with the 28 basket toolbox I would love to use it. Thanks again for everything you do.

Attached File(s)
File Type: zip S9 TMS.zip   6.2 MB | 367 downloads
  • #3,534
  • Edited 9:20am Feb 9, 2019 8:29am | Edited 9:20am
Quoting seller9
{quote} Can you spell it out to me in pictures and words as to just what you are doing. I have a thick head and it takes a big hammer to get through at times. The TS needs to know exactly what to do if it is to be automated and specific numbers where areas of interest are. Also, would it be fully auto or some of both? Thanks
Dear Eugene.
First of all, I apologize.
I thought that because you created the program, it would be understandable to post pictures and explanations about the chart.
I am not good at my English skills, so there is a limit to explain pictures and words, but if you give me time, I will post it as soon as possible.
It was fully automatic.
but there was some shortage, I hoped to make it an improved TS.
I attached template file and please read my prior post.
The Dashboard and Ts version are v6x and use F60 Hm filter.
Dashboard was 15m and Each pair chart 30m. only use Swingex and Semaex.
My concern is making pivot zone. I have not a indicator.
Make a zone with an RND NUM near the pivot line so that we can only enter the zone if a swing or a sema signals.
I would like to ignore the swing or sema signals coming from the space between the pivot line because I don't know where the direction will go.
The Ts given signal continuously at the between pivot line space. It spended time to make profit.
And I would like to have the option to enter or TP only near the pivot line or zone.
Thank you for your concern.
Best Regards.
Attached File(s)
File Type: tpl default.tpl   15 KB | 162 downloads
  • #3,535
  • Feb 9, 2019 3:07pm Feb 9, 2019 3:07pm
Quoting alula
{quote} Yes Please First of all thanks for all of your creativity, programming skills, and your positive attitude towards building an informational forum for learning and sharing, unfortunately this is seldom found anywhere. I originally found this thread due to a rabbit hole I fell down reading the original BigE TMS forum. Really love his positive personality and his system. After success using his broken down TDI indicator on the 4hr (London)/1hr(NY) I started looking into automating it. This lead me to the attached EA/TS I believe you...
TMS_v10 EA is not mine.
  • #3,536
  • Feb 9, 2019 5:06pm Feb 9, 2019 5:06pm
Quoting alula
WOW! What a week! So Monday night I was playing around with some "what if that would be fun" settings when my wife started having early contractions. So I left everything mid toying around to go have a fantastic experience. From time to time I was able to check MT4 on my phone to wonder about my different setups but did not bring any work or other trading tools with me so was unable to change any settings, some things are more important. Here is what I came back to, and thoughts. Oh! Healthy Boy by the way Open Asia start trading session;...
By the way congratulations alula and thanks for sharing all the best
  • #3,537
  • Feb 9, 2019 5:25pm Feb 9, 2019 5:25pm
Dear Gene and traders.
I attached the description with pictures because of the time I have to go to work.
I hope this helps.
Thank you.
Best regards.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: 1. trade area.jpg Size: 356 KB
Click to Enlarge Name: 2. suggest.jpg Size: 359 KB
  • #3,538
  • Edited 1:55am Feb 10, 2019 1:41am | Edited 1:55am
Dear Gene.
Here is setting pic. With use dashboard F60 filter.
Please tell me if you need anything more.
Best Regards.

Attached Image (click to enlarge)
Click to Enlarge Name: dashboard setting.jpg Size: 335 KB
Attached Image (click to enlarge)
Click to Enlarge Name: chart setting.jpg Size: 344 KB
  • #3,539
  • Feb 10, 2019 9:10am Feb 10, 2019 9:10am
Quoting JimmyPark
Dear Gene and traders. I attached the description with pictures because of the time I have to go to work. I hope this helps. Thank you. Best regards. {image} {image}
What are the rules?

1)
2)
3)
4)
5)
etc
  • #3,540
  • Edited 5:46pm Feb 10, 2019 4:59pm | Edited 5:46pm
Quoting seller9
{quote} What are the rules? 1) 2) 3) 4) 5) etc
Dear gene.
Rules can be surprisingly simple.
Use the F60 filter in dashboard and I think that the trading conditions are already set in the dashboard and TS, so we only need to get the benchmark point in the pivot line area.

Piont is how to catch the benchmark point.(Something like sup dem area)
1. We need to enter in the space that overlaps the RND NUM with the pivot line according to the signal given by the swing and the sema.
(We can either use an ATR multiplier based on the pivot line. and pivot zone should be visual.)
I don't want to get trade in between the pivot lines space.
2. TP is based on a signal from a swing exit or a sema exit or when approaching a pivot line.(The pivot line at entry should be excluded from the TP.)

I am sorry to have difficulty in expressing in English and lack of ability.
Please tell me if you need anything more.
Best Regards.
0 traders viewing now