I will code your EAs and Indicators for no charge

You have to post the source code.

Oh, i dont have it.

Good day all coders

I'm reaching out to anyone kindly willing to help me on this project. I just need the code modified of the attached indicator to the following specs. I feel it could be a very powerful trading tool for binary options

The attached indicator works by printing a signal upon crossing of adx lines. Basically the main goal is adding an option such as print a signal(up or down arrow) on the chart with other option of varying sensitivities along with the period input.

1) Once the indicator is attached on the chart, it just seems like the signal appears on the break of the high or low of the previous candle. So here just add an option at a specified period input percentage to print an arrow. Like at either 90%/ 80%/ 88% /93% before the lines almost cross. Just whatever percentage specified in a parameter

This can be achieved by simply getting the signal when the 2 adx lines come close to each other by less than value of X.
So essentially we use certain values of X, X being the point of a touch/cross, at variances of the value of X.XXX(up to 3 decimal points) to determine the probability of a cross/touch if the specified percentage is less than 100%
<shown on 1st attached chart>

2) And a timer for specified percentages stating how close the specified percentage is to being complete and alerting the user to when thy can expect the signal. The timer can oscillate back forth, increasing or decreasing in value as the lines come closer to crossing or moving away. it just remains on the chart. And it can match the the value of specified x.xxx. Example specified value of x=99.3% when the lines come 99.3% close to cross/touch timer turns red and prints a signal, or it can just back away and timer percentage value decreases as the lines spread out because specified value of 99.3% was not reached
<shown on 2nd attached chart>

3) A collaborated data window also will be a huge help in saving hundreds of hours of manual back testing.
For the data window, to determine all the specified values, the indicator can check the high/low of the bar the signal was printed on<preferably the same bar> in relation to the bar before it to determine whether it was on a bull bar or bear bar and if it was correspondingly a bad or good signal
<shown in 3rd attached chart>

4) And what are the chances of the indicator being able to determine the probability of a true signal based on either how fast or slow the distance between the lines reached to a point of cross, and the position of them relative to each other? To increase those chances, Something like micro levels, up to 3 decimal points as well, and the probability of a true signal determined on where the lines are based on each micro-level. So the probability of the lines crossing when they enter between two levels is quite high. The micro-levels can come into play as a filter(option to turn filter on/off) to determine the position of the lines if too narrow, parallel, upward sloping, downward sloping and all that. For the filter am thinking may be the position of the lines themselves in correlation to each other too. If they're are too deviated before a touch= high chances of a bad signal, or if they were 50-60% between 2 micro-levels more than the previous levels at the specified percentage value of X= higher chances of a true signal

If the filter cannot function that way then it can be scrapped
<shown in 4th attached chart>

5) Add a message and sound notification function

And to make sure in any case the indicator DOES NOT REPAINT, RETRACE OR THE SIGNAL DISAPPEAR if the platform is restarted. That is an integral part of this project. If the indicator fails to do either of these functions like it retraces or repaints then the data window is absolutely useless. It should function the same when it is loaded on to a chart on any time frame so manual back testing will be easier and accurate and I dont have to wait to let it run for hours after loading it onto a chart to collect the data

I would greatly appreciate anyone's help on this. Thank you
<credit to ferrufx>

i want ea which add lot on loss breaceven x pips ema cross

Can you help me code this indicator?

It's a decompiled code so i doubt anyone will help you on this.

.

Can anyone help me to fix up problems. During back test this EA takes entries for first time condition met. When market runs it does not make any new trades for new conditions. Thank you very much.

Hello fellow traders and coders.

Can someone please assist in coding this indicator (attached image), multichart indicator.

Kindly ignore the rectangle boxes. I am only interested in the multichart display that shows the same currency pair on one screen with different time frames (Monthly, Weekly, Daily... etc) or (3MN, 6MN and 1Y).

Thanks in advance.

Can someone code an EA based on the logic of this indicator?

That version of adx repaints.

ps) this version won't repaint

i am gratefull to master coder cyber for his great help.....my humble request to all master coder please look in to this post( a lot of old days forex factory friends are also showed great interest too..) and create one Ea still i am looking for it to test and i am doing always manually with great success with order block (you can check my post ) .if any master coder interested than can ask any questions.

i post and discuses a lot with cyber master coder ..please check attached link for clear understand nuts and blot...

https://www.forexfactory.com/showthr...80#post8896680

EA BUY SELL RULES /CONDITIONS TO FOLLOW(IGNORE ALL OLD POST IMAGE /RULES)
SELL TRADE RULES:
BUY TRADE RULES /EXAMPLE:

no mq4 file? we cant do it man. need source code file my friend.

Please help out with the indicator attached. It is the one that prints the purple arrow in the picture attached. It only prints the arrow when the time frame is changed or when it is loaded onto the chart. Can it be coded to refresh automatically without having to change the time-frame.

Coded like in kindergarden...as a results that the trade conditions are ok we get about 20% 130 errors...i m not convinced of this ea but you can try out the best settings...in my view the sl tp is too near..

And only buys....the coder changed the original settings...I corrected it...

It looks like this indicator is repainting.Is signalling based on high-low?But I am not sure. Any comments?

Hi Master,

I am newbie in mq4 program. please advice me how to use icustom for fibonnaci_all_tf.mq4 to get the actual price of each Fibo level base on number of Bars.

or please give me sample EA to get the actual price of each fibo level base on number of Bars.



BR,

Thank you mrtools, much appreciated kind sir... am guessing it works the same way by printing a signal on the bar which breaks the high or low of the previous bar?

And may i ask if you may be willing to help me with my request?

Firstly, I want to show my gratitude for replying to my post. Actually I m not a genuine coder. I try to code only my strategy into ea to trade with small capital. This EA suitable for only several pairs. And using customized setting(Min Range) this ea will filter those trades of small TP and SL. This EA takes counter trades so it fails for small SL TP. However, if you provide me the mql4 file, I will make more effort to learn solid coding as well as I will be able to develop this EA more perfect. I am egerly waiting for your kind response.