MMOSC EA | Forex Factory

Options

Go to
Permalinks
Print Thread
Attachments: MMOSC EA
Exit Attachments

MMOSC EA

  • #1
  • First Post: Edited Sep 25, 2018 12:14pm Aug 11, 2018 11:08am | Edited Sep 25, 2018 12:14pm
06/09/2018:

  1. Multi-Pair and MMOSC removed.
  2. The 300 smart FF members who downloaded the multi-pair have an EA that is going to make them a vast sum of money assuming conservative money management.
  3. More EAs to follow.
  4. In total there has been over 1200 downloads so that is a lot of positive Karma points!!


------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

The latest EA is the Illiad - EURUSD - 1 HOUR - GMT+2 - Optimisable Parameter = DPERIOD1: -1 to 1 step: 0.01 - copy Pivot to the indicator folder:

PLEASE PERFORM YOUR OWN TESTS AND OPTIMISATIONS - YOU'LL STRAIGHTEN THE EQUITY CURVE VIA PERIODIC OPTS.

Entry conditions:
LONG: Short Term Stochastic(20, 1, 3) < 50
SHORT: Short Term Stochastic(20, 1, 3) > 50

BUY STOP:
PIVOT R3

SELL STOP
PIVOT R3

Stop Loss: (7.97 * ATR(87)) pips
Move Stop Loss to Entry price when in profit at least 237 pips
Profit Trailing by (4.86 * ATR(39)) pips

Stop Trailing Long: Move Stop to (HighestInRange(11, 0, 19, 0)
Stop Trailing Short: Move Stop to (LowestInRange(11, 0, 19, 0)



-----------------------------------------------------------------------------------------------------------------
FIBO-GRID IS ONE EA FROM A GRID PORTFOLIO I AM DESIGNING. IT REQUIRES THE INDICATOR JJN-FIBO (ATTACHED). It is an intraday EA and has no SL and no PT as it is a component of a grid.

Attached Image (click to enlarge)
Click to Enlarge Name: EQUITY CURVE.png Size: 63 KB
Attached File(s)
File Type: ex4 Illiad.ex4   125 KB | 1,190 downloads | Uploaded Sep 10, 2018 4:32am
File Type: ex4 Pivots.ex4   18 KB | 1,297 downloads | Uploaded Sep 10, 2018 4:33am
File Type: ex4 FIBO GRID.ex4   123 KB | 992 downloads | Uploaded Sep 23, 2018 9:19am
File Type: ex4 JJN-Fibo.ex4   15 KB | 927 downloads | Uploaded Sep 23, 2018 9:19am
  • #2
  • Aug 12, 2018 1:22pm Aug 12, 2018 1:22pm
With regular reoptimization the following has good edge:

EURUSD long only 15min:

Open long stop when HeikenAshiClose(17) crosses or is above HeikenAshiOpen(2)

at yesterday's high with a SL of 37 pips and PT of 223.

Use Pivot Support 3 to trail .
  • #3
  • Aug 13, 2018 1:10pm Aug 13, 2018 1:10pm
Quoting mbrown
With regular reoptimization the following has good edge: EURUSD long only 15min: Open long stop when HeikenAshiClose(17) crosses or is above HeikenAshiOpen(2) at yesterday's high with a SL of 37 pips and PT of 223. Use Pivot Support 3 to trail .
Hi mbrown! Could you please add a magic number input to the EA (and to the Tesla EA as well)? Thanks a lot!
  • #4
  • Aug 13, 2018 2:26pm Aug 13, 2018 2:26pm
Quoting SputnikX
{quote} Hi mbrown! Could you please add a magic number input to the EA (and to the Tesla EA as well)? Thanks a lot!
I've changed it to an external variable and updated the OP,

Thanks for letting me know.
  • #5
  • Edited 6:32am Aug 14, 2018 6:09am | Edited 6:32am
https://www.forexfactory.com/showthread.php?p=11255561#post11255561
Attached File(s)
File Type: mq4 Pivots.mq4   16 KB | 707 downloads
File Type: ex4 BITCH_BETTER_HAVE_MY_MONEY1..ex4   128 KB | 800 downloads
  • #6
  • Aug 14, 2018 8:47am Aug 14, 2018 8:47am
BAT ATR TRAILING STOP.

Set magic number to zero (0) to trail stop manual trades. BTR ATR parameters available for fine tuning.
Attached Image (click to enlarge)
Click to Enlarge Name: BAT ATR.jpg Size: 121 KB
Attached File(s)
File Type: ex4 Donwealt TRAIL.ex4   114 KB | 822 downloads
File Type: mq4 BAT ATR.mq4   4 KB | 832 downloads
  • #7
  • Edited 9:09am Aug 15, 2018 4:30am | Edited 9:09am
Multi-pair portfolio daily (1440) ea:

Parameter settings - There are only two to optimise from 1 to 8 with a step-size of 1 - testers should optimise from 2003 to date to tune the parameters to your broker:

  1. audcad
  2. audchf
  3. audjpy
  4. audnzd
  5. audusd
  6. cadchf
  7. cadjpy
  8. chfjpy
  9. euraud
  10. eurcad
  11. eurchf
  12. eurgbp
  13. eurjpy
  14. eurnzd
  15. eurusd
  16. gbpaud
  17. gbpcad
  18. gbpchf
  19. gbpjpy
  20. gbpnzd
  21. gbpusd
  22. nzdcad
  23. nzdchf
  24. nzdjpy
  25. nzdusd
  26. usdcad
  27. usdchf
  28. usdjpy
  29. usdsgd

This algo was developed a few years ago so I ran it quick back-test on the EURUSD from 2003 to date to make sure it still has edge.

Portfolio, EURUSD Equity curve and Algo ex4 attached in the OP above..

It's a Candle Pattern and short-term RSI based algo.

There's no need to buy it from commercial if you can get them for free from my algo surplus which grows by the day. No guarantees though, my live portfolio is in open drawdown this week. Algos have equity peaks and troughs just like regular traders.

Attached Image(s) (click to enlarge)
Click to Enlarge Name: MULTI PAIR.png Size: 57 KB
Click to Enlarge Name: EURUSD.png Size: 37 KB
  • #8
  • Aug 16, 2018 12:37pm Aug 16, 2018 12:37pm
Quoting mbrown
LongEntryCondition = ((-126.150002 < MMOSC) And MMOSC < 60.25)) AND HOUR>06:00GMT AND HOUR <16:00GMT ShortEntryCondition = ((126.150002 > MMOSC) And MMOSC > -60.25)) AND HOUR>06:00GMT AND HOUR <16:00GMT Entry orders
Could you explain this a bit further for someone who is trying to recreate this. I'm having trouble understanding what the numbers in the condtions are refering to?
  • #9
  • Edited 4:00am Aug 17, 2018 3:05am | Edited 4:00am
Quoting gegs
{quote} Could you explain this a bit further for someone who is trying to recreate this. I'm having trouble understanding what the numbers in the condtions are refering to?
Hi gegs,

The numbers are optimizable thresholds that the MMOSC has to be within.


It's not pretty, I should have used object variables but I'm lazy!:


double MMOSC() {

if(iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1)!=0 &&
iATR(NULL,0,10,1)!=0 && iATR("DE30",0,10,1) !=0){
return( ((Close[1]/iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR(NULL,0,10,1))-
((iClose("DE30",0,1)/iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR("DE30",0,10,1))) ;
}
else return(0);
}
double MMOSCDAX() {

if(iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1)!=0 && iATR(NULL,0,10,1)!=0 && iATR("DE30",0,10,1) !=0&&iMA("DE30",0,200,0,MODE_SMA,PRICE_CLOSE,1)!=0){
return( ((Close[1]/iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR(NULL,0,10,1))-
((iClose("DE30",0,1)/iMA("DE30",0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR("DE30",0,10,1))) ;
}
else return(0);
}
double MMOSCLN() {

if(iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1)!=0 &&
iATR(NULL,0,10,1)!=0 && iATR("DE30",0,10,1) !=0){
return(log( ((Close[1]/iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR(NULL,0,10,1))-
((iClose("DE30",0,1)/iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR("DE30",0,10,1)))) ;
}
else return(0);
}
double MMOSCDAXLN() {

if(iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1)!=0 && iATR(NULL,0,10,1)!=0 && iATR("DE30",0,10,1) !=0&&iMA("DE30",0,200,0,MODE_SMA,PRICE_CLOSE,1)!=0){
return(log( ((Close[1]/iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR(NULL,0,10,1))-
((iClose("DE30",0,1)/iMA("DE30",0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR("DE30",0,10,1)))) ;
}
else return(value);
}
int value = 0;
  • #10
  • Aug 17, 2018 5:58am Aug 17, 2018 5:58am
Hi, I would like to test but don't understand differences between EAs. TESLA_3 works for me in backtest but MMOSC doesn't open any trade. And hhat is Multipair EA?


Thanks

D.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 27 KB
  • #11
  • Aug 17, 2018 6:49am Aug 17, 2018 6:49am
Quoting dafa
Hi, I would like to test but don't understand differences between EAs. TESLA_3 works for me in backtest but MMOSC doesn't open any trade. And hhat is Multipair EA? Thanks D. {image}
I recommend you optimise the EAs to ensure they are finetuned to your broker. MMOSC is a 15 minute EURUSD strategy.

Also, ICMarkets' DAX epic is "DE30", I will release another version of MMOSC which allows the user to set the DAX epic to match their broker.

mmosc wasn't designed to be multi-pair but has been checked across various markets. With a little research you should find several other pairs where this EA works as long as you optimise it.

There is another daily multi-pair EA on my first post.
  • #12
  • Aug 17, 2018 11:57am Aug 17, 2018 11:57am
Hi mbrown,

Thanks for sharing trading logic. I am trying to follow it.
However, looking at the condition for Long and Short below, what do you do if both conditions are true?
For example, MMOSC value is 25.50.

LongEntryCondition = ((-126.150002 < MMOSC) And MMOSC < 60.25)) AND HOUR>06:00GMT AND HOUR <16:00GMT
ShortEntryCondition = ((126.150002 > MMOSC) And MMOSC > -60.25)) AND HOUR>06:00GMT AND HOUR <16:00GMT
  • #13
  • Aug 17, 2018 2:36pm Aug 17, 2018 2:36pm
Quoting pnithi
Hi mbrown, Thanks for sharing trading logic. I am trying to follow it. However, looking at the condition for Long and Short below, what do you do if both conditions are true? For example, MMOSC value is 25.50. LongEntryCondition = ((-126.150002 < MMOSC) And MMOSC < 60.25)) AND HOUR>06:00GMT AND HOUR <16:00GMT ShortEntryCondition = ((126.150002 > MMOSC) And MMOSC > -60.25)) AND HOUR>06:00GMT AND HOUR <16:00GMT
You need to reoptimise the values to match your broker and set the thresholds to ranges with which you're comfortable as I've mentioned a number of times above. I have not experienced the issue you described because I have optimised the thresholds. So in short, optimise the thresholds.
  • #14
  • Aug 17, 2018 7:38pm Aug 17, 2018 7:38pm
Quoting mbrown
{quote} You need to reoptimise the values to match your broker and set the thresholds to ranges with which you're comfortable as I've mentioned a number of times above. I have not experienced the issue you described because I have optimised the thresholds. So in short, optimise the thresholds.
My bad looking over detail in Post 1 for optimization.
I will try to do it. Thanks again, mbrown.
  • #15
  • Aug 19, 2018 1:17pm Aug 19, 2018 1:17pm
Hi mbrown, which one is the latest EA? I want to test it..Thanks.
  • #16
  • Aug 21, 2018 4:13pm Aug 21, 2018 4:13pm
Can you please more explain about the calculation?
The EURUSD calculation by me is between 1000-4000 and the DAX is between 0.017 and 0.17 in the last two month.

The reasult is always positive, beacause all values are positive.

so can you got negative and positive result:
MMOSC = ((EURUSD Close[1]-MA(EURUSD Close[1],200))/ EURUSD ATR(10)) - ((Dax Close[1]-MA(EURUSD Close[1],200))/ DAX ATR(10))
  • #17
  • Aug 21, 2018 4:19pm Aug 21, 2018 4:19pm
Quoting Beertje
Can you please more explain about the calculation? The EURUSD calculation by me is between 1000-4000 and the DAX is between 0.017 and 0.17 in the last two month. The reasult is always positive, beacause all values are positive. so can you got negative and positive result: MMOSC = ((EURUSD Close[1]-MA(EURUSD Close[1],200))/ EURUSD ATR(10)) - ((Dax Close[1]-MA(EURUSD Close[1],200))/ DAX ATR(10))
Hi,

TO be honest, I moved on from these EAs onto other projects so won't be discussing them further but:

return( ((Close[1] / iMA(NULL,0,200,0,MODE_SMA,PRICE_CLOSE,1))/iATR(NULL,0,10,1))
  • #18
  • Aug 24, 2018 7:11am Aug 24, 2018 7:11am
Quoting mbrown
BAT ATR TRAILING STOP. Set magic number to zero (0) to trail stop manual trades. BTR ATR parameters available for fine tuning. {file} {file} {image}
Wow. Just seeing this now. Thanks a lot. God bless you beyond your imagination.
  • #19
  • Aug 27, 2018 3:50am Aug 27, 2018 3:50am
Quoting mbrown
BAT ATR TRAILING STOP. Set magic number to zero (0) to trail stop manual trades. BTR ATR parameters available for fine tuning. {file} {file} {image}
Thank you for coding the batatr trailing stop ea. I have been testing it.
Please I have the following complaints about it.
1. It does bring Hard stop to BE once profit reaches a set amount but does not lock in any profit at BE. It should have a setting for the amount of pips (say 2 pips) it should lock in once profit reaches that BE trigger level. (BE profits helps to protect against slippage and pays for spread/commissions)
2. It doesn't put any line for SL nor TP. Most importantly It does not show any line for me to know where the trailing stop is at any point in time if at all it's trailing since I don't see it close others according to my settings. Even when I put the batatr indicator on the chat, price will cross it without the ea closing the trade. Price will eventually go and knock it off at BE(that's the only thing it does. Bringing brokers stop loss to zero pips).
3. There some settings there I don't understand what they are meant for eg. Minimum SLPT, maximum SLPT, StopTrailingCoef, and ExitAfterBars(this one when left empty, closes orders immediately they are put in).

Please is it possible to have a trailing stop ea that works like that batatr trailing indicator. The ea trailing stopline will be visible to me (and adjustable too) so that i see what its doing. If the ea trailing stop line can be a soft one (hidden from broker) better.
The broker's stop that it brings to BE, if it can have the option of locking in a few pips at that time, that will be great.
Thank you.
  • #20
  • Edited 4:51am Sep 1, 2018 3:56am | Edited 4:51am
Give this PIVOT system a demo if you want (if you don't want to, no biggie), it's been on a roll recently.

TESTED WITH ACTUAL TICKS, EXCESSIVE SLIPPAGE, REAL VARIABLE SPREAD AND COMMISSION OF $7 PER LOT PER ROUND TURN.

--------------------------------------------------------------------------------------------------------------------
EURUSD 15MIN
--------------------------------------------------------------------
Pseudo Source Code of MOTY PIVOTS
Spread: 2.0, Slippage: 0.5, Min distance of stop from price: 5.0
--------------------------------------------------------------------
====================================================================
== Entry conditions
====================================================================
LongEntryCondition = ((PivotR2 + PivotR1) > PivotR3)
ShortEntryCondition = ((PivotS3 * PivotS3) > PivotS1)

====================================================================
== Entry orders
====================================================================
-- Long entry
if LongEntryCondition is true {
if No position is open then Buy at PivotPP + (0.9 * BBWidthRatio(80, 2.0)) Stop;
Stop/Limit order expires after 54 bars.
Stop Loss = 45 pips;
Profit Target = 45 pips;
// Move SL to BE (on close)
Move Stop Loss to Entry price when in profit at least 32 pips;
}
-- Short entry
if ShortEntryCondition is true {
if No position is open then Sell at PivotPP + (-0.4 * 17.0 pips) Stop;
Stop/Limit order expires after 16 bars.
Stop Loss = 45 pips;
Profit Target = 45 pips;
// Move SL to BE (on close)
Move Stop Loss to Entry price when in profit at least 32 pips;
}

2nd chart: The last 28 trades....1% per trade.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: MOTY PIVOTS.png Size: 117 KB
Click to Enlarge Name: TesterGraph.gif Size: 26 KB
Attached File(s)
File Type: mq4 BBandWidthRatio.mq4   2 KB | 847 downloads
File Type: mq4 Pivots.mq4   16 KB | 793 downloads
File Type: ex4 MOTY PIVOTS.ex4   114 KB | 1,571 downloads
0 traders viewing now