FXM and TTM | Page 49 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

TTM Squeeze 8 replies

Ttm Squeeze 0 replies

Attachments: FXM and TTM
Exit Attachments

FXM and TTM

  • #961
  • Jan 19, 2018 8:57am Jan 19, 2018 8:57am
Hi FxMadness I've noticed something strange with the candles on my offline charts. I run 2 separate different charts and when I load them, 1 of them shows all the wicks and the other doesn't. I'm using the same offline settings on the FXM, and the same template for the offline chart but they don't load the same. What could be causing this or is there something I can do?
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Screen Shot 2018-01-19 at 10.01.24.png Size: 168 KB
Click to Enlarge Name: Screen Shot 2018-01-19 at 10.01.11.png Size: 212 KB
Truth is like poetry. And most people f*cking hate poetry.
  • #962
  • Edited 8:05am Jan 27, 2018 6:34am | Edited 8:05am
Quoting FxMadness
Posting. 8/21/2017 MANDATORY UPDATE Indicators: FXM_Diff3,FXMfibo Experts: FXM_TTM, FXMSetup Libraries: SDSMain.dll, BDMnextgen2.dll Templates FXMDIFF, FXMTTM Put them all in place. Run FXMSetup from the experts folder Open a chart and load the template FXMDIFF. Change the settings to your liking (save the template). Click on [Lck] to lock the current selection and then [Bsk] to generate an offline chart. Go to you offline chart window and open the offline chart. On that chart load the template FXMTTM. Just for a first glance click on [break] and...
Hi FxMadness,
Thank you very much for this thread.
I have a broker with currency symbols e.g. EURUSD+, GBPUSD+, etc.
Have followed above mentioned procedure to install all necessary indis and EA but FXMSetup is generating a lot of messages. and I am not sure if my MT4 terminal was registered with you.
Pls see attached some of the infos and also screenshot from my MT4 Expert tab.
Pls advise it there is a way to install everything manually and register later on?

Edit: this is my live MT4 terminal. I do not have Demo account with this broker.

I have tried to load FXM__Diff and FXM_Writer to H1 EURUSD+ chart but unfo no luck.
Only FXMFibo loads withour any problems on that chart.



Thanks in advance for your help
Mike
Attached Image(s) (click to enlarge)
Click to Enlarge Name: FXMSetup - continue and register FXM_Diff3 and FXM_TTM.PNG Size: 115 KB
Click to Enlarge Name: FXMSetup.PNG Size: 19 KB
Click to Enlarge Name: FXMSetup-AUDCAD-not available.PNG Size: 107 KB
Click to Enlarge Name: FXMSetup-AUDCHF-not available.PNG Size: 108 KB
Click to Enlarge Name: FXMSetup-AUDCHF-not available-check Market Watch.PNG Size: 111 KB
Click to Enlarge Name: FXMSetup-AUDJPY-not available.PNG Size: 107 KB
Click to Enlarge Name: FXMSetup-Experts-tab-info.PNG Size: 149 KB
Click to Enlarge Name: FXMSetup-failed to load history for follownig pairs.PNG Size: 116 KB
Click to Enlarge Name: FXMSetup-USDCHF-failed to load history.PNG Size: 103 KB
  • #963
  • Jan 28, 2018 10:30am Jan 28, 2018 10:30am
Hello FxMadness,

Additional info: my broker is X-Trade Brokers, and I have live account only.
I am unable to load on chart any of FXM-Diff3 indis on that broker.

CCFp-Diff [v2.0] (by FerruFX is loading withour any problems).

My MT4 Expert tab shows followning messages while loading FXM_Diff3 indicator on any chart:
1.Custom indicator FXM_Diff3 GOLD+ (or EURUSD+, or GBPUSD+, or ... etc), H1: loaded saccessfully
2.FXM_Diff3 GOLD+, H1: initialization failed (32767)
3.FXM_Diff3 GOLD+ H1: uninint reason 8
4.Custom indicator FXM_Diff3 GOLD+, H1: removed

Pls advise if FXM_Diff3 will not load without registration and if so pls advise how can I register that indi with you.

Have set proper settings in FXM_Diff3 indi regarding suffix + , disabled automatic recognition of prefix and suffix.

X-Trade Broker do not offer NZDCHF+ currency pair only.
Have loaded history of all pairs by using ForceLoadHistoricalData script ( took a quite a while to load all history).

Upper case comma spearated include: AUDUSD,AUDCAD,AUDJPY,AUDCHF,AUDNZD,EURAUD,GBPAUD,EURCAD,USDCAD,NZDCAD,GBPCAD,CADJPY,CADCHF,EURCHF,USDCHF,GBPCHF,CHFJPY,
EURUSD,EURJPY,EURNZD,EURGBP,GBPUSD,GBPNZD,GBPJPY,USDJPY,NZDJPY,NZDUSD

Upper case coma separated exclude: NZDCHF,

Have also tried all above pairs with suffix+ but all in vain.
I am unable to place FXM_Diff3 on chart.

Pls advise what am I doing wrong?

Have a lot of green pips
Mike
Attached Image (click to enlarge)
Click to Enlarge Name: Expert_tab_MT4-XTB.PNG Size: 44 KB
  • #964
  • Edited 12:56pm Jan 29, 2018 12:25pm | Edited 12:56pm
Hi FXM,

Today market is open and I have got one more info for loading FXMDIFF.tpl:

FXM__Diff3 GOLD+, H1: zero divide in FXM__Diff3.mq4 (2521,17)

FXMSetup run from Experts folder did not recognize any currency pairs... (NZDCHF is not listed with X-Trade Broker )

Pls see attached screenshot from experts tab.

Could you pls help me to solve this problem (1. registration by FXMSetup - maybe you can make entry to exclude currency pair e.g NZDCHF
2. Why I can not load FXM__Diff3 on any chart of my MT4?)
Because of point 1. and 2. I am unable to Lock and start Writer for offline chart and proceed with FXMTTM.tpl

EDIT: FXM__Diff3 from page 47 is loading on X-Trade Broker charts - but only with setting use correlation=false and include 27 pairs, exclude NZDCHF+ and
replace NZDCHF+, CADCHF+ settings.

Have a nice day
Mike
Attached Image(s) (click to enlarge)
Click to Enlarge Name: FXM__Diff3 - zero divide error (2521,17).PNG Size: 37 KB
Click to Enlarge Name: FXM-currency pairs left for FXM__Diff3 and FXMSetup.PNG Size: 77 KB
Click to Enlarge Name: FXM Diff3 indicator is not loading to any chart.PNG Size: 98 KB
  • #965
  • Edited 11:45am Jan 30, 2018 11:19am | Edited 11:45am
Mierka,

Sorry, a bit late.

FXMSetup does not register with me, it uses the registry.

Your broker has mixed currencies like eurusd and eurusd+.
Setup will find the first one and think that there is no suffix.

Step 1, try this one by filling in the "+" as suffix on the input parameters.
Attached File(s)
File Type: ex4 FXMSetup.ex4   13 KB | 503 downloads
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #966
  • Jan 30, 2018 11:54am Jan 30, 2018 11:54am
Quote
EDIT: FXM__Diff3 from page 47 is loading on X-Trade Broker charts - but only with setting use correlation=false and include 27 pairs, exclude NZDCHF+ and
replace NZDCHF+, CADCHF+ settings.

FXM_Diff3 gives you the manual inpu on prefix and suffix so setting the auto feature to off and a "+" on suffix should work.

Indeed you have to replace nzdchf by a pair that you think is suitable.
Best way is to look at long term correlations and find a (most of the time) correlating pair to replace the missing pair.
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #967
  • Feb 1, 2018 2:25pm Feb 1, 2018 2:25pm
Quoting FxMadness
Mierka, Sorry, a bit late. FXMSetup does not register with me, it uses the registry. Your broker has mixed currencies like eurusd and eurusd+. Setup will find the first one and think that there is no suffix. Step 1, try this one by filling in the "+" as suffix on the input parameters. {file}
Hello FxMadness,

Thanks a lot for your reply. Attached version of FXMSetup with prefix and suffix entries worked fine with X-Trade Broker.
I appreciate it very much.

FXM_Diff3 indicator if giving me hard time while I try to load it on the chart as my MT4 terminal if freezing (X-Trade Broker).
The only way to make it work again is to change name of used profil. XTB is very strange broker and I thing that will not work with them for long time.


Have installed ICMarket MT4 terminal - demo account and everything is working like a charm.

Sorry for inconvenience caused.
Wishing you a nice evening
Mike
  • #968
  • Feb 1, 2018 2:50pm Feb 1, 2018 2:50pm
Quoting FxMadness
{quote} FXM_Diff3 gives you the manual inpu on prefix and suffix so setting the auto feature to off and a "+" on suffix should work. Indeed you have to replace nzdchf by a pair that you think is suitable. Best way is to look at long term correlations and find a (most of the time) correlating pair to replace the missing pair.
Hello FxM,

Thanks a lot for above tip.

Kind Regards
Mike
  • #969
  • Feb 5, 2018 11:06am Feb 5, 2018 11:06am
Hello FXMadness,
Thanks a lot for this awesome tool. I did not encounter any problems with the installation, but i tried taking trades and below is the error message is see in the Experts tab. How can i solve it?
Attached Image (click to enlarge)
Click to Enlarge Name: fxm error.PNG Size: 7 KB
  • #970
  • Feb 9, 2018 5:15am Feb 9, 2018 5:15am
Quoting stefdek
Trading the news with TTM. For the time being , i use Fxm indi to search the settings among Strength/CcFp Lev.1 on W1 D1 H4 ...etc...whatever settings returns me at least 5 pairs which contains the pair that is being involved in the coming News ... I will not fill-up the thread with screenshots ...only today´s one ... {image} {image} Several days ago , by luck ..while playing with Fxm settings ..I was able to get the PERFECT USD basket ( which, if, I did not needed to restart my PC for a Fu...windows update , I would have hold in a safe for months...
please can u share ur USD template. Thanks
  • #971
  • Feb 12, 2018 12:34am Feb 12, 2018 12:34am
Hello,

I get a zero divide error in FXM_Diff3.mq4 (2534,17).

Can you fix this?

Thanks.
  • #972
  • Feb 12, 2018 5:13am Feb 12, 2018 5:13am
Quoting chrisdk2017
Hello, I get a zero divide error in FXM_Diff3.mq4 (2534,17). Can you fix this? Thanks.
Chris, You need to load history. That might solve the problem.
  • #973
  • Feb 16, 2018 6:46am Feb 16, 2018 6:46am
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 143 KB
  • #974
  • Feb 16, 2018 7:41am Feb 16, 2018 7:41am
Quoting dyksthree
{image}
Yes D3 you got it ...there is NO USD template ..it is only to play with the FXM settings on monthly daily weekly whatever TF FT TT FF strength , ccfp , cc ...so , at some
times within 14 or 16 pairs suggestions ...you will have the ones you are looking for , to be able to select EUR only pairs USD , CAD , etc...and form a basket at your taste .... These tools are fantastic ..( I am not playing with them right now...this is why I have no share theses weeks) .
  • #975
  • Feb 19, 2018 4:07am Feb 19, 2018 4:07am
Quoting stefdek
{quote} Yes D3 you got it ...there is NO USD template ..it is only to play with the FXM settings on monthly daily weekly whatever TF FT TT FF strength , ccfp , cc ...so , at some times within 14 or 16 pairs suggestions ...you will have the ones you are looking for , to be able to select EUR only pairs USD , CAD , etc...and form a basket at your taste .... These tools are fantastic ..( I am not playing with them right now...this is why I have no share theses weeks) .
What's that, not ?
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #976
  • Feb 19, 2018 7:55am Feb 19, 2018 7:55am
4hours apart. Had to Hold on, was getting screwed. Thanks FXMaddness
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Screenshot (13).png Size: 120 KB
Click to Enlarge Name: Screenshot (16).png Size: 118 KB
  • #977
  • Feb 19, 2018 8:10am Feb 19, 2018 8:10am
Quoting dyksthree
4hours apart. Had to Hold on, was getting screwed. Thanks FXMaddness {image} {image}
I think i would have placed the Sell break line just a little bit below the Lw major support line.
That would have saved you some DD.
And if you are sure (seeing the trend line) that S1 was going to act as a Resistance you can drag the SellAdd0 line to that level so it is going to work as a reverse sell entry (line turns red when dragged above the current price).
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #978
  • Feb 19, 2018 8:23am Feb 19, 2018 8:23am
Quoting FxMadness
{quote} I think i would have placed the Sell break line just a little bit below the Lw major support line. That would have saved you some DD. And if you are sure (seeing the trend line) that S1 was going to act as a Resistance you can drag the SellAdd0 line to that level so it is going to work as a reverse sell entry (line turns red when dragged above the current price).
Thanks Sir! thats a lesson there.
  • #979
  • Feb 20, 2018 2:25am Feb 20, 2018 2:25am
ON THE RIDE
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 139 KB
  • #980
  • Feb 20, 2018 4:57am Feb 20, 2018 4:57am
Quoting dyksthree
ON THE RIDE {image}
I hope that you will be able to keep this one in profit.
Looks like a small dip in dollar strength for now so tight sl or set be.

Attached Image (click to enlarge)
Click to Enlarge Name: tempusd.PNG Size: 14 KB
I can calculate the movement of stars, but not the madness of men. Isaac N.
1 trader viewing now