Daily CCFp, CC, & strength [with EA XM7-FXM] | Page 144 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

CCFp 5.0 - Currency Strength Indicator 95 replies

Updated CCFp and CFP indis for relative strength trading 55 replies

CCFp Cluster indicator system 76 replies

FXM and TTM 1,013 replies

CCFp or relative strength confusion 5 replies

Attachments: Daily CCFp, CC, & strength [with EA XM7-FXM]
Exit Attachments

Daily CCFp, CC, & strength [with EA XM7-FXM]

  • #2,861
  • Sep 29, 2017 1:24pm Sep 29, 2017 1:24pm
Quoting Metac
{quote} Hello, in my opinion the vps services of own mql5.com are more appropriate and faster enough, of course their speeds are different. But using them is simple. What speed is almost good for us in your mind?
Hello. Good and technical question.
In my opinion, ram is much more important than the core cpu or ghz.
And hdd is also important in the next ping priority and close the bon server with the broker. For example, if your broker is in the UK, it's better to use the server in London. I have at least 5gbram and 70gb hdd and buffer 64 . If you open more than 4 charts in MetaTrader. There's a lot of pressure on the server and if it's not strong, your resources will be losing control of the system.
I did not test mql servers. Usually brokers themselves offer a bid for the server.
if you my trade,My-post analysis, subscribed to ME
  • #2,862
  • Sep 29, 2017 1:28pm Sep 29, 2017 1:28pm
Quoting IamJAX
Hi Nesta, How do u decide short term and medium term? Short term templates are profitable. But often when it goes negative, its not recovering. How do u decide the time period for the FXM_diff indicator? I want to experiment with Indicator settings.
Hello. I do not know your answer. You should ask the programmer for the indicator yourself. I did not have contact with him ever.
if you my trade,My-post analysis, subscribed to ME
  • #2,863
  • Sep 29, 2017 1:31pm Sep 29, 2017 1:31pm
Quoting Nooby114
I also have another EA that does that exact same thing as i explained but then use another "Extra Filter" like RSI and MACD for example. The idea is after you get the signal from the FXM Indicator you then go to each pair that got a signal and check the RSI and MACD in the H1 - M30 - M15 - M5 charts The one I'm talking about is the one that uses the extra filter as I explained before, the one with that indicator {image} Do you want that EA too ? If you do it will probably take me a couple of days to clean up the code a bit more
Hello. Did you get the results of your robot test results? Have you made any progress?
You can consult your ideas and ideas by returning to jess. And combine or work together. I think jess can help.
if you my trade,My-post analysis, subscribed to ME
  • #2,864
  • Edited 4:19pm Sep 29, 2017 4:04pm | Edited 4:19pm
Hello.
It's not a problem for me. There are several opening hours for the robot to run.
The main problem in
set_tralingstop_oneachtrades
I chose it 25 but it was closed at a loss. And this option should be more accurate as it is very useful. It has a problem. When 25 pips are in profit, you should never close at -0.18.
The next problem is lock-in profits.
For example
beginlockprofit: 100
lockfastcentlevel: 75
setlockevery: 6
When the price reaches 100 pips, the lock will start. And every 6% next lock. it's true?
The price changes on the assumption and the saveprofit number decreases and moves.
I suggested tp based on dollars and money.
Why? Because sometimes we are positive in 70 pips, but in fact we are financially and negatively, because we have 50 positions.
tp each 1 $:
Lock on the money.
For example, from $ 50. Because each currency pair has its own value, for example, gbpjpy eurgbp gbpusd. Are not comparable. As 10 pips of gold with 10 pips with usdjpy are so different in terms of money.
This option should be added.
The next problem.
Dynamic virtual cartoon.
Why? Because the constant can not be determined. You must first calculate the number of positions by default. And when we are asleep or not at the computer desk, we run.
For example, I chose:
lower: 180
The night's offers or nighttime signals were 35. At runtime, the number is -140 and will never reach 180, and as a result, our real basket will never be opened.
You must calculate your own default number based on the number of our positions per night or any time we want.
We should not enter the number initially. Just have to choose bounce. And the virtual basket must be calculated automatically, and if the total of 20 pips goes to profit, the real basket will be opened.
Example:
lowertrigger: AUTO
bounce: 30
At run and at the start of the number -150, the automaker considers 30 pips in profit, to open the real basket and our positions.
auto means automatic according to the number of our positions.
If the initial number and auto goes to negative, the basket will not open. And if we're at the computer desk, we'll change and change the automatic mode.
For example, if I choose -170, 30 positions can be suggested and total will be -120, then +200 and the actual basket never and never will be opened.
But if it's automatic, he will consider the number 120 at first, then check bounce, and if you've been sleeping, the real basket is open and you've benefited.
if you my trade,My-post analysis, subscribed to ME
  • #2,865
  • Sep 29, 2017 11:21pm Sep 29, 2017 11:21pm
Quoting nesta
Hello. It's not a problem for me. There are several opening hours for the robot to run. The main problem in set_tralingstop_oneachtrades I chose it 25 but it was closed at a loss. And this option should be more accurate as it is very useful. It has a problem. When 25 pips are in profit, you should never close at -0.18. The next problem is lock-in profits. For example beginlockprofit: 100 lockfastcentlevel: 75 setlockevery: 6 When the price reaches 100 pips, the lock will start. And every 6% next lock. it's true? The price changes on the assumption...
Got it. tomorrow will take a look at each point.
I will have question for you cause some of the issue are not clear.
But let me try to see if I understand..... so tomorrow will have some questions and maybe answers...

Jess
Our AWESOME IMAGINATION is the true holy grail!
  • #2,866
  • Sep 30, 2017 6:20am Sep 30, 2017 6:20am
Quoting xmess7
{quote} Got it. tomorrow will take a look at each point. I will have question for you cause some of the issue are not clear. But let me try to see if I understand..... so tomorrow will have some questions and maybe answers... Jess
Hello. I tried to write clear. But my English is not very good. I think jens better understand what I mean. You ask me, I will answer again. Of course today is better than tomorrow.
if you my trade,My-post analysis, subscribed to ME
  • #2,867
  • Sep 30, 2017 6:27am Sep 30, 2017 6:27am
Quoting jenbols
Basket 10 of the weekly finally flying this Friday _ will close in 7 minutes _ Sets were posted previously pages The Nesta Baskets got mixed up as have used new Fxm 28th Sep and all got messy ... wish that thing was less messy and miss already the normal ccfp {image}
Hello . Which version was this? Just started testing this version Comrade Please also show runtime. Of course you often run at 07:15, but write to the rest of the people to know better.
Thank you.
if you my trade,My-post analysis, subscribed to ME
  • #2,868
  • Sep 30, 2017 7:32am Sep 30, 2017 7:32am
Quoting nesta
Hello. It's not a problem for me. There are several opening hours for the robot to run. The main problem in set_tralingstop_oneachtrades I chose it 25 but it was closed at a loss. And this option should be more accurate as it is very useful. It has a problem. Whe.,..........
Miii !!!....Un c'haiu capitu nente....
  • #2,869
  • Sep 30, 2017 7:51am Sep 30, 2017 7:51am
Quoting Paul9
{quote} Miii !!!....Un c'haiu capitu nente....
Please do not write in non-English language.
if you my trade,My-post analysis, subscribed to ME
  • #2,870
  • Sep 30, 2017 9:25am Sep 30, 2017 9:25am
Quoting jenbols
{quote} i could post the tpl ... its fine ... but i just modified the name of the Indi there and deleted one which was of no use there was CCFp-Diff_[v1.03] i delete as this is the same value as of the CCFp-Diff_[v2.0] then i think there was some kind of CCFp-Diff_[v2.0-MTF](1) so this delete and add the normal standard version CCFp-Diff_[v2.0-MTF] ... with No (1) the when it says Pin number for Eax, i set pin to 0 as to set pin eax to 1.2. etc .. we do it only when Eax it is used so only this little modification .. for the rest all is the same...
I checked the tpl1 signals today. There is a lot of contradiction in the signals, and the very opposite is actually suggested. Did not you have this problem so much?
if you my trade,My-post analysis, subscribed to ME
  • #2,871
  • Sep 30, 2017 9:31am Sep 30, 2017 9:31am
Quoting cescof
{quote} Regards {file}
Hello. Did you test this short-term tpl repeatedly? When do you run?
if you my trade,My-post analysis, subscribed to ME
  • #2,872
  • Sep 30, 2017 10:21am Sep 30, 2017 10:21am
Quoting nesta
{quote} Hello . Which version was this? Just started testing this version Comrade Please also show runtime. Of course you often run at 07:15, but write to the rest of the people to know better. Thank you.

  1. was posted here https://www.forexfactory.com/showthread.php?p=10311616#post10311616

but yes still testing last week _ run time always 07:15gmt but i also have one for 09:gmt start
This is weekly version but i do the Daily too ,, the daily is obviously faster but it depends on the set Tf used
CC is impulse and can take pairs running in direction of the trend based on last candle or previous candle , but not much good in flat markets

 

  1. I cannot have all sets made by CC/2/TF and Ccfp/2/TF and Strength/2/TF.. it could be going in the same direction yes

and all is fine, but when switching direction is problem , so i like balanced sets_
in market there is no balance if we mean logic ... it's not logicaL _/

  1. Daily sets work if the market that day is going in direction of the candle for example a TT or a TF

but if the market for that day is not going in Dir of candle TT it could be going in direction of previous candle FF or FT
which maybe was a different color .... and on daily means the previous day or day before
but on weekly means the previous week of the week before ....

 

  1. So in ccfP we have two things to be considered .... : ><

Direction of the Short-Med Trend and
Direction of the Previous and Current Candle, Candle
Some times i don't want to set a TIME end to the daily because if it was set to end at gmt 5pm for example
and the market that day was a non trending but only retracing, (up to 5pm) or over 5pm it could recover later on, or the day after ,,,,
and so i let it run a more time ... This of course depends on things and pairs _
Some daily that closed at 6pm gmt or 5pm ,,,, and they were at a loss, if they were let to run a bit more time
they could have recovered ....

  1. Hard to say ... but i think there should be a New thread about "Gain Understanding about CCFP meaning and practical usage"

but there are already too many threads about it
oh goshzz there will be a lot to write and lots of photos to explain ... and wish i had the time to do so ..

The arriving better than the arrival, the journey has just started
  • #2,873
  • Sep 30, 2017 10:59am Sep 30, 2017 10:59am
Quoting jenbols
{quote} was posted here https://www.forexfactory.com/showthread.php?p=10311616#post10311616 but yes still testing last week _ run time always 07:15gmt but i also have one for 09:gmt start This is weekly version but i do the Daily too ,, the daily is obviously faster but it depends on the set Tf used CC is impulse and can take pairs running in direction of the trend based on last candle or previous candle , but not much good in flat markets I cannot have all sets made by CC/2/TF and Ccfp/2/TF and Strength/2/TF.. it could be going in the...
very good. Do you think the short-term system is good? Have you ever tested the short-term system?
Do you think how much time do you need to finish your own tests? And why focus on a tf or ccfp or strengh? I feel that you are often scattered, and this sometimes causes confusion. For example, I just tested ccfp for 5 weeks. I designed a special style and then I started to work towards strengh and cc. We need to be more focused. And it's not possible to test several methods and types at the same time. Of course my point is.
Did you read jess with my post about the offer? are you agree. Please write your robot suggestions because half of the work was done by the robot, not an indicator.
if you my trade,My-post analysis, subscribed to ME
  • #2,874
  • Sep 30, 2017 12:21pm Sep 30, 2017 12:21pm
Quoting nesta
{quote} very good. Do you think the short-term system is good? Have you ever tested the short-term system? Do you think how much time do you need to finish your own tests? And why focus on a tf or ccfp or strengh? I feel that you are often scattered, and this sometimes causes confusion. For example, I just tested ccfp for 5 weeks. I designed a special style and then I started to work towards strengh and cc. We need to be more focused. And it's not possible to test several methods and types at the same time. Of course my point is. Did...
will read jess post to see proposal ok ,,

i have modified a bit your tpl ,, which i don't know i think was cr7 but not sure , you have too many so i lost count which was ;-)
Modifications
This tpl i have taken off the Fxm_diff4 and replaced it with Fxm_diff3 normal one
but the latest version ...
i had to do it all manually ... because when you save presets from Fxm_diff4 and transfer to Fxm_diff3 new latest model
they don't work and it all resets to defaults .. strange but true ...
Also taken off the Ccfp-diff which is a modification short of the Fxm_diff3 but dont have the Fxm calculations and the Autolock,,, never mind
i deleted that and done it ,,,,
also i don't use the Ccfp-diff 3.01 as it is the same values of the Ccfp-diffv0.2
but i have left all values as you set and want to see if it works okay

From Monday i test the short methods you posted _

 

  1. This tpl here attached I post, but it has not been tested yet but if someone got space on his computer and wants to try that's fine
  2. NestaTpl_Mod_Cfp-Cc-Stg_UM.tpl (Literation) = Nesta Tpl using Ccfp/Cc/Strenght and UM (Use Medium)

pls note for this you need to use the latest updated Fxm_diff(3) posted 28th sep
but i will attach it here too so no problem for that you have it here ,,,, File Type: ex4 FXM__Diff3.ex4 235 KB

About the EA sets you can use what you like the SL/TP per trade or only per Basket
in the photo shows what i am using as sets for this Ea ... for me they are good
The daily some times can be very profitable but if it is stopped at 6pm gmt it might still be at loss and recvering
so i use the option of ignore close hours if in DD _ Look photo
I see too many Fxm and indicators slow down Cpu so that is reason why i use only 3/4 indicators Fxm + Ccfp normal or Ccfdiff / Ccdiff etc ...
Okay from Monday then i test yours ....

Attached Image(s) (click to enlarge)
Click to Enlarge Name: nesta tpl mod.jpg Size: 226 KB
Click to Enlarge Name: sets ea.jpg Size: 378 KB
Attached File(s)
File Type: ex4 FXM__Diff3.ex4   235 KB | 407 downloads
File Type: tpl NestaTpl_Mod_Cfp-Cc-Stg_UM.tpl   143 KB | 361 downloads
The arriving better than the arrival, the journey has just started
  • #2,875
  • Sep 30, 2017 1:21pm Sep 30, 2017 1:21pm
Quoting jenbols
{quote} will read jess post to see proposal ok ,, i have modified a bit your tpl ,, which i don't know i think was cr7 but not sure , you have too many so i lost count which was ;-) Modifications This tpl i have taken off the Fxm_diff4 and replaced it with Fxm_diff3 normal one but the latest version ... i had to do it all manually ... because when you save presets from Fxm_diff4 and transfer to Fxm_diff3 new latest model they don't work and it all resets to defaults .. strange but true ... Also taken off the Ccfp-diff which is a modification short...
Have you designed this for the middle term? Is not 500 pips or 400 pips locked too much? I think it's a lot of risk. And it's more reasonable to start with 150 pips. 400 pips from my point of view is a bit more than expected. In ccfp dif I oppose the option of flip open. Because very often the signal is removed from the lightbox list. And there is lag.
So runtime: 07:15 gmt
You do not use traling normally.
My suggestion was about tp based on money for the robot. You know, I've said many times that sometimes you've had 70 pips, but you see that your balance has not been added.
Because the number of posts is high and I believe it should be. lock max allow trade. Because if the flip is true. As soon as a new signal is offered in the basket, the pre-opened position closes us at a loss, and the new signal is replaced. I believe that our criterion should be based on the money in our balance sheet. And I find the pip less important. Your criterion must be money and profit. For example, 50 pb gbpjpy with 50 pip gbpusd in terms of money. Because each one has different spreads. I think that the pairs of currencies that have more and more spreads should sometimes flip over to trade.
Another one of my suggestions was Trigger dynamically or automatically.
Because I sometimes choose lower triger 150 and bounce 30 and never reaches 150 and goes straight to profit, and never lets up the real basket. The auto option should be placed in the trigger. Sometimes, in a tpl of 30 pairs of currencies, or 30 signals are suggested, and the 40th, and the calculation is hard to precisely determine the trigger number, and it is quite difficult. But if the automatic calculation is based on the number of positions by default, we will only choose bounce, for example 40. Trigger dynamically calculates the number 120 at the start, then examines the bounce and then opens the real basket.
The macd divergence filter is also very important for signal verification, or hma.
if you my trade,My-post analysis, subscribed to ME
  • #2,876
  • Sep 30, 2017 2:43pm Sep 30, 2017 2:43pm
Quoting nesta
{quote} Have you designed this for the middle term? Is not 500 pips or 400 pips locked too much? I think it's a lot of risk. And it's more reasonable to start with 150 pips. 400 pips from my point of view is a bit more than expected. In ccfp dif I oppose the option of flip open. Because very often the signal is removed from the lightbox list. And there is lag. So runtime: 07:15 gmt You do not use traling normally. My suggestion was about tp based on money for the robot. You know, I've said many times that sometimes you've...
This is your Tpl but i have removed the Fxm called Fxm-4 and put the normal one
If you have a Fxm3 version and you change the Fxm3 updated then it is fine and it updates
but if you have Fxm4 or Fxm(3) copied 3 times then it is a mess for tpl and they do not load ..
I could load the Fxm4 into indicator folder but then it is not the original name so best to use original only
So i changed only that and i want try this from Monday
The arriving better than the arrival, the journey has just started
  • #2,877
  • Edited 4:39pm Sep 30, 2017 3:33pm | Edited 4:39pm
Hello.

UPDATE october 1

I made the weekly update. And all the new Tpls and the 6th Edition series.
Mostly optimized. I optimized all tpls.
Jens (https://www.forexfactory.com/jenbols) settings based on 15 minutes after the opening of the London market and in fact 07:05 gmt.
And I changed a bit. Just the same hour.
I run my midterm tpl, either at 23:05 or 00:05.
I do not declare in the short-term system and it's free. Everyone can choose and work from 3 tpl of short duration.
The new update is currently being released with the beta 7 robot (https://www.forexfactory.com/xmess7), and there are a total of 9 tpl that contains short and long term, which is provided by Nooby (https://www.forexfactory.com/nooby114) Jens (https://www.forexfactory.com/jenbols) and I, combined.
Attached File(s)
File Type: rar Daily-Nesta-01-10-2017[SerieV6+JEnbolsTPLs].rar   1.4 MB | 630 downloads
if you my trade,My-post analysis, subscribed to ME
  • #2,878
  • Edited 6:21pm Sep 30, 2017 6:06pm | Edited 6:21pm
Quoting stefdek
{quote} Hola Alex , well interesting approach ..to be considered indeed. Not very familiar with Fib's but for sure NESTA will have an expert eye on this. So , for you opening Mo Tu Wd Thr at 23:05 GMT is producing theses results in so little time ..wooaw . Thank for sharing. Any TradeExplorer or myfxbook ..? to see DD... Parabens.
Sorry, I don't have trade explorer, but there was no drawdown at all,
I am thinking about start a live account using this approach
get daily midterm basket trades signals on demo account, and start in live account place a buy or sell limit in RDL RDH, if the trade is for buy I will place a limit buy at RDL, if sell limit order RDH

using no strategy, no stop loss, only manual buy sell limit, this demo account is growing

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_3.png Size: 90 KB


I think if use the daily mid signals, will have more profit and less risk .since we will go with the trend,

Nesta my apologies , today I have posted this chart, not your EA Chart, my intention is to give another vision, maybe the awesome coders here, can add this strategy to the EA, limit orders at RDL RDH , seems to be market turning point every day , I am 1 week testing this , will continue this week
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_4.png Size: 46 KB
  • #2,879
  • Sep 30, 2017 11:09pm Sep 30, 2017 11:09pm
Quoting jenbols
{quote} This is your Tpl but i have removed the Fxm called Fxm-4 and put the normal one If you have a Fxm3 version and you change the Fxm3 updated then it is fine and it updates but if you have Fxm4 or Fxm(3) copied 3 times then it is a mess for tpl and they do not load .. I could load the Fxm4 into indicator folder but then it is not the original name so best to use original only So i changed only that and i want try this from Monday
I hate to burst your bubble but there is no FXM-4 or FXM_diff4, it does not exists.
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #2,880
  • Oct 1, 2017 12:21am Oct 1, 2017 12:21am
Quoting alextavares
{quote} Sorry, I don't have trade explorer, but there was no drawdown at all, I am thinking about start a live account using this approach get daily midterm basket trades signals on demo account, and start in live account place a buy or sell limit in RDL RDH, if the trade is for buy I will place a limit buy at RDL, if sell limit order RDH using no strategy, no stop loss, only manual buy sell limit, this demo account is growing {image} I think if use the daily mid signals, will have more profit and less risk .since we will go with the trend, Nesta...

Attached Image (click to enlarge)
Click to Enlarge Name: B.PNG Size: 75 KB
0 traders viewing now