My Eax Dash Pins | Page 38 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Dashboard EAX 11,981 replies

Dash Correlation trading 12 replies

Gann HiLo Histogram MTF/Dash 0 replies

Breakout Dash Journal 151 replies

Trade Management Dash 6 replies

Attachments: My Eax Dash Pins
Exit Attachments

My Eax Dash Pins

  • #741
  • Nov 20, 2017 12:39am Nov 20, 2017 12:39am
Attached Image
When you are successful perhaps give a thought to others ... Kiva dot org
  • #742
  • Nov 20, 2017 4:36am Nov 20, 2017 4:36am
Quoting PayItForward
{image}
Hi,

it depend of strategy used but in general for stochastic we buy under 20 (oversold) and we sell above 80 ( overbought ) ,for rsi we don't give buy signal in overbought or sell in oversold. so this is a normal behavior the opposite will be a problem.

Cheers,
  • #743
  • Nov 20, 2017 5:24am Nov 20, 2017 5:24am
Szia,
köszönjük ezeket a mutatókat SAM!
Nagyszerű mester vagy, alig tudlak követni, ilyen sebességgel dolgozol!
Bemutatom a mai Fibo V1 eredményeket.
Hagyja, hogy vidám legyen a napod, és akkor jövök.
Tisztelettel: Ferenc
[csatolja] Képernyőfotó 2017-11-20 - 12.16.01.png;
Attached Image (click to enlarge)
Click to Enlarge Name: Képernyőfotó 2017-11-20 - 12.16.01.png Size: 943 KB
  • #744
  • Edited 8:16am Nov 21, 2017 7:43am | Edited 8:16am
Quoting Sam2x
{quote} Hi, it depend of strategy used but in general for stochastic we buy under 20 (oversold) and we sell above 80 ( overbought ) ,for rsi we don't give buy signal in overbought or sell in oversold. so this is a normal behavior the opposite will be a problem. Cheers,
Sam the EaxPin Mtf is perfect and works nicely with all Pins
It takes signals when the PIN_Tf's are all aligned, or random and not aligned and that's the way it has to work_
It does not work only with Pin_Ccfp
for example signals given in this way are working with any Pin, but not working with Pin_Ccfp...
--------------------
Red_Red_Green_Red_____________No Pin Out, no Signal
Green_Green_NoSignal__Green____Pin Out Ok
NoSign_Red_Red_Red____________Pin Out Ok
--------------------
Not that it does matter as i don't use Auto_Ccfp anymore, but i had to use it today to make this test
as Ccfp gives many signals and good for test to see which Pin works_
Wonder if you have possible explanation for this
Many Thanx
Attached Image (click to enlarge)
Click to Enlarge Name: mix-plugin.jpg Size: 642 KB
The arriving better than the arrival, the journey has just started
  • #745
  • Nov 21, 2017 8:04am Nov 21, 2017 8:04am
Quoting jenbols
{quote} Sam the EaxPin Mtf is perfect and works nicely with all Pins in the beginning i thought that it would give signal ...
Hi Bro,

in this version all must be green or red to give signal, i mean from tf1 to 7 must be bullish ,i don't see a bullish from 1-7 ,it's a normal behavior , what you need is any ! to get signal out !

Cheers,
  • #746
  • Nov 21, 2017 8:24am Nov 21, 2017 8:24am
Quoting Sam2x
{quote} Hi Bro, in this version all must be green or red to give signal, i mean from tf1 to 7 must be bullish ,i don't see a bullish from 1-7 ,it's a normal behavior , what you need is any ! to get signal out ! Cheers,
OK I thought of that too Sam, and tried with Any Entry on Eax
but if there is only One Eax Pin enabled which Reads the PinOut of the PinMixPlugIn
pressing Any Entry won't work as the Option Any Entry on Eax is valid to use only when there are 2 Eax Pin Enabled_
But honestly, does not really matter as long as it works with all other Pins it is fine ... Ccfp does not make money in Auto
and if it does it is only random and not consistent, the only way to use Ccfp is Manual and with a Sequence so no problem
Many Thanx
The arriving better than the arrival, the journey has just started
  • #747
  • Nov 21, 2017 8:33am Nov 21, 2017 8:33am
Quoting jenbols
{quote} OK I thought of that too Sam, and tried with Any Entry on Eax but if there is only One Eax Pin enabled ..
Welcome Bro
  • #748
  • Nov 21, 2017 9:15am Nov 21, 2017 9:15am
Opps sorry Sir, me again...
Eax_Pin_Superslope/dash_Betav1.00
What is intended for Signal on Mtf Agree ... Is it the Mtf of the Pin.... Rsi + the Other, or do you mean
another Time Frame aside from the one that we already set in the Pin ?
Cheers

Quoting Sam2x
{quote} Welcome Bro
Attached Image (click to enlarge)
Click to Enlarge Name: superslope.jpg Size: 492 KB
The arriving better than the arrival, the journey has just started
  • #749
  • Edited 9:54am Nov 21, 2017 9:32am | Edited 9:54am
Quoting jenbols
Opps sorry Sir, me again... Eax_Pin_Superslope/dash_Betav1.00 What is intended for Signal on Mtf Agree ... Is it the Mtf of the Pin.... Rsi + the Other, or do you mean another Time Frame aside from the one that we already set in the Pin ? Cheers {quote} {image}
super slope use 3 tf when the 3 agree it give green background or red/maroon background , the 2 tf are set automaticly you need to set the trading tf only. use the attached indi with chart to see.

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot1.png Size: 25 KB

Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot3.png Size: 25 KB

with shift to look at

Attached Image (click to enlarge)
Click to Enlarge Name: Shift.PNG Size: 17 KB


if you need to set Difference Threshold & Entry Level Cross set Auto Setting to false

Attached Image



Cheers,
Attached File(s)
File Type: mq4 Baluda.SuperSlope.v.2.2.mq4   44 KB | 436 downloads
  • #750
  • Nov 21, 2017 12:19pm Nov 21, 2017 12:19pm
Quoting Sam2x
{quote} super slope use 3 tf when the 3 agree it give green background or red/maroon background , the 2 tf are set automaticly you need to set the trading tf only. use the attached indi with chart to see. {image} {image} with shift to look at {image} if you need to set Difference Threshold & Entry Level Cross set Auto Setting to false {image} Cheers, {file}
Ehy Sam, much appreciated for taking the time to show this draw
it is now very clear indeed_
... i had a good feeling about this slope .. I think i saw the Indi on Steve Hopwood forum some time ago
Your Picasso drawing skills are also improving by the way...
The arriving better than the arrival, the journey has just started
  • #751
  • Nov 21, 2017 5:45pm Nov 21, 2017 5:45pm
Sam
Can you please explain why Coral shows current bar Red with last closed bar Red on the Chart and yet in EAX shows Green
Thanks
Attached Image
When you are successful perhaps give a thought to others ... Kiva dot org
  • #752
  • Edited 8:24pm Nov 21, 2017 8:13pm | Edited 8:24pm
I've been spending the last couple of hours to watch the Behavior of the Mixer PlugIn and the way
the pairs are Mixed into the Pin before going to PinOut

Sam, about the Mix PlugIn and PIn Out it is fine they match with Eax
and about the way the Indi_Pins are mixed before they go to PinOut, pls read Pm_

At some point i thought that the mix of Pins was not 100%correct,
therefore i have tried to put the same Pins into the Mixer-PlugIn and i saw some types Signal [Pins 30-31-32-33/P.Out(6)]
and later, I set the same (4) Pins (with changed pin number) 3/4/5/6 directly onto Eax and i saw another type of Signals_

Eax works perfectly with all 6 Pins 3/4 whatever ,,,.. and when 2 or more Pin match the color the signal is taken,
however when the Option Any entry it is used the Eax has an unexpected behavior and she takes random trades
based on rules that i am not able to detect yet and wish Aeseme would explain this_
If playing with more that 2 Pins, From What i have seen Eax is likely to open Trades when there are
2 Reds and 1 Green = Sell, ......but when there are
2 Greens and 1 Red ...which should be a Buy Eax won't take it for some reasons, or it will take it randomly_
With 2 Pins red and Green Eax will never open a trade as by default she don't allow opposites to be taken which is correct_
it can also happen that 2 Reds and 1 Green are being shown on Eax but no trade will be opened_
I am not sure how the other Senior traders here see this, however this Rule could be good or not depending
if it fits on the personal criteria.
Some might say, Yes for me it is right and if EAX is Reading 2 Greens and 1 Red it is ok to buy cos 2 Indi-Pins show stronger signal that only one ..
Some other might say: Nouhh, 2 Greens and 1 Red, should be a No Trade as to take opposites even with 2 greens would just be like lottery_
If you ahve any Idea about this, pls let me know, i got an idea of what i want, but i wont be able to use it with the current rules as they
are too random .. If and If the EAX Any Entry Option it is used, with 3 Pins or more, but if Eax it is Used "Any Entry" Style with 2 pins only it is fine.

I'd best not to write t0o much, but looking at the photo would be much better
and also trying for yourself if you could and confirm so that you could back me up and confirm i am not gone insane yet ?
Thank you
Attached Image(s) (click to enlarge)
Click to Enlarge Name: Eax Any Entry Behavior.jpg Size: 1.2 MB
Click to Enlarge Name: Eax Any Entry.jpg Size: 88 KB
The arriving better than the arrival, the journey has just started
  • #753
  • Nov 22, 2017 12:18am Nov 22, 2017 12:18am
Quoting PayItForward
Sam Can you please explain why Coral shows current bar Red with last closed bar Red on the Chart and yet in EAX shows Green Thanks {image}
Hi,

hard to tell bro , show me more detail plz


Quoting jenbols
I've been spending the last couple of hours to watch the Behavior of the Mixer PlugIn and the way the pairs are M..
Hi Jen,

the any strategy as it is now ,is first in , first out ,so not good when we have sell and buy in the same time, i will add those rules in the next version.

Best Regards,
Sam
  • #754
  • Nov 22, 2017 12:28am Nov 22, 2017 12:28am
Quoting Sam2x
{quote} Hi, hard to tell bro , show me more detail plz {quote} Hi Jen, the any strategy as it is now ,is first in , first out ,so not good when we have sell and buy in the same time, i will add those rules in the next version. Best Regards, Sam
Like what more detail, you have the chart with the candles, you have the settings for the Pin, you have the EAX pins highlighted, what more do you want?
Please advise
When you are successful perhaps give a thought to others ... Kiva dot org
  • #755
  • Edited 3:24am Nov 22, 2017 2:17am | Edited 3:24am
Quoting PayItForward
{quote} Like what more detail, you have the chart with the candles, you have the settings for the Pin, you have the EAX pins highlighted, what more do you want? Please advise
you are using the old version , use this one please.this one support continous ( entry when candle open below corel and close above corel ) with shift to look at
shift 0 = current , shift 1 = previous .... etc .... and rsi filter .

Cheers,
Attached File(s)
File Type: ex4 EAX_PIN_CoralBeta_v1.02.ex4   20 KB | 334 downloads
  • #756
  • Edited 4:04am Nov 22, 2017 2:54am | Edited 4:04am
updated version, please use the last version to avoid bugs :

Those pins are compatible with Pin Mixer & Dashpin

Cheers,
Attached File(s)
File Type: ex4 EAX_PIN_xBarsBreakoutBeta_v1.03.ex4   20 KB | 299 downloads
File Type: ex4 EAX_PIN_MACDHistogramBeta_v1.01.ex4   16 KB | 458 downloads
File Type: ex4 EAX_PIN_TDICrossBeta_v1.05.ex4   19 KB | 446 downloads
File Type: ex4 EAX_PIN_3LZZSemaforBeta_v1.03.ex4   21 KB | 705 downloads
File Type: ex4 EAX_PIN_Flows_Beta_v1.01.ex4   23 KB | 284 downloads
File Type: zip EAX_PIN_ASCTrendBeta_v1.01.zip   33 KB | 320 downloads
File Type: zip EAX_PIN_Fisher_Beta_v1.01.zip   19 KB | 306 downloads
File Type: zip EAX_PIN_T3ColorHistoBeta_v1.01.zip   21 KB | 316 downloads
File Type: zip EAX_PIN_GenesisMatrixBeta_v3.04.zip   67 KB | 298 downloads
File Type: zip EAX_PIN_GannHi-Lo_Beta_v1.03.zip   29 KB | 325 downloads
  • #757
  • Edited 9:55am Nov 22, 2017 8:57am | Edited 9:55am
Attached File(s)
File Type: zip EAX_PIN_QQECross_Beta_v1.01.zip   19 KB | 317 downloads
Attached File(s)
File Type: ex4 EAX_PIN_3xMACrossBeta_v1.05.ex4   28 KB | 646 downloads
Attached File(s)
File Type: ex4 EAX_PIN_3SmaBeta_v1.01.ex4   20 KB | 304 downloads
Attached File(s)
File Type: zip EAX_PIN_SlopeDirectionBeta_v1.01.zip   24 KB | 436 downloads
Attached File(s)
File Type: zip EAX_PIN_DemarkLines_Beta_v1.03.zip   72 KB | 428 downloads
File Type: zip EAX_PIN_NonlagdotBeta_v1.02.zip   39 KB | 324 downloads
  • #758
  • Nov 22, 2017 4:45pm Nov 22, 2017 4:45pm
Quoting Sam2x
{quote} you are using the old version , use this one please.this one support continous ( entry when candle open below corel and close above corel ) with shift to look at shift 0 = current , shift 1 = previous .... etc .... and rsi filter . Cheers, {file}
What I used was the latest one in Post 1 which I see is now updated.
Will test.
If I send you some rules can you code Coral accordingly?
If so do you want the rules here or PM? When the rules are successful I also want to confirm on live.
Please advise.
Thanks.
When you are successful perhaps give a thought to others ... Kiva dot org
  • #759
  • Nov 22, 2017 6:07pm Nov 22, 2017 6:07pm
Attached Image (click to enlarge)
Click to Enlarge Name: Coral_v102_PIN-long_Coral-short.png Size: 86 KB
When you are successful perhaps give a thought to others ... Kiva dot org
  • #760
  • Nov 22, 2017 6:29pm Nov 22, 2017 6:29pm
Quoting PayItForward
{quote} What I used was the latest one in Post 1 which I see is now updated. Will test. If I send you some rules can you code Coral accordingly? If so do you want the rules here or PM? When the rules are successful I also want to confirm on live. Please advise. Thanks.
Hi,

Pm or Email plz,

Quoting PayItForward
{image}
Because the price crossed the line , i don't check for coral color in this version . what i look at for now is the position of the price and the line above or below or cross. but i can add this rules in the next version

Cheers,
0 traders viewing now