I will code your EAs and Indicators for no charge

Hi,
Are you able to write an indicator for the following as I've not been able to find one in my search:

Indicator to show the Volume like the volume indicator histogram but has a Standard Deviation indicator over the top that alerts when the volume crosses the deviation level defined by the user.

Inputs when loading would be
1) The number of candles used to calculate the stdefv (period)
2) The stdev level that would then alert if crossed

kind regards

Hi lukeb,

now i got it many thanks, as you said - not exactly what im looking for (ATR 1 shows current value not previous) but realy great. If you would do the modification as soon as you have time and fun, i would realy appreciate that. Thank you in advance and best Regards

Edit: just a little note, by a deeper look at your indy i noticed that the settings of the Tf objects 02,012,022 are reset to default if i change the Tf

Please use upper and lower band of Bollinger band as trigger signal.
Signal A: if close[1] && close[0] >Upper band -- sell signal
Signal B: if close[1] && close[0] < Lower band -- buy signal
first loss: if it is sell -- trigger buy
if it is buy -- trigger sell
After that change to:
Signal A: Upper band -- buy signal
Signal B: Lower band -- sell signal
---------------------------------------------
Now add some filter (do not reverse filter):
find a trend indicator: if it up trend range only buy at lower band.
it if down trend range only sell at upper band.
first loss: if it is sell -- trigger buy
if it is buy -- trigger sell
After that change to:
Signal A: Up trend && Upper band -- buy signal
Signal B: Down trend && Lower band -- sell signal
----------------------
Do not reverse trend filter (trend is your friend)

Hello to all,

There is the possibility of a script or EA read this alert message MT4?
from there buy and sell.

Who can help with impossible code:

need code that detects previous order candle VOLUMEN and compares with actual order volumen if volumen(actual) > volumen(previous) then open the actual order.

as previous order can be at any amount of candles we need to compare all to first candle of day on that tf. then count candles up to the orders opened then start comparing in time? crazy sounds but thats what i need

who can help with that

Dear Cyber sir,

I need a EA for the following parameters. Please try to help me?

14 SMA High
14 SMA Low
Time Frames : 5M, 15M, H1

If the candle close above 14 SMA High - BUY
If the candle close below 14 SMA Low - SELL

Take Profit 10-20 pips
Trailing Stop 5 Pips

Just wondering if anyone could tell me how this EA works.

Attached File(s)

Stop_Reverse_2.8.ex4   39 KB | 559 downloads

Attached File(s)

Stop_Reverse_2.8.mq4   19 KB | 670 downloads

Can anyone could tell me how to add the email alert?.

Hi cyber1


Thanks for help,, nice job..
last 2 weeks 82 pips profit..

Can You create EA for QUANTUMITS ?

EXAMPLE
If EUR or some currency touch level 8.99.
Then MATCH 7 currency ..which is lowest (MUST BELOW 0.99)
if USD is in level 0.99 or below..

SELL EURUSD..

If EUR or some currency touch level 0.01.
Then MATCH 7 currency ..which is Highest(MUST ABOVE 8.01)
if USD is in level 8.01 or Above..

BUY EURUSD..
custom TP,SL
please help this

It works perfectly.
Thanks again.
Reg.Zack

Hi,
here is an Indicator which I find very useful because it is calculates the real-$-value for each pip.
This is helping to reach the goals for your monthly income better.
Hopefully someone could make a small change .
Please just change the corner Settings and the Text size.
Should be customizable so that the user could decide which corner give the most space or maybe placing the Indi in the middle or whereever.
Thanks for your help.
Regards Zack

Hi coders,
here is another idea for an Indi which I find also useful:
-Count all earned (just the Closed Trades and not the actual Open Trdes for this asset!!) pips/points over the period of 1 year for 1 asset
The Indi should Show the whole +/- amount of pips/points in the lower right Corner.
I think this helps other Traders,too.
Thanks for an info if this is codeable and hopefully some coder will see a need for this one,too.
Reg.Zack

Hi,

I have an XO indicator (ex4) and need to get alerts when the value changes from 0 to 1. As I cannot code (I am not just a beginner coder anyways) this into the the existing ex4 file, I need an external one that gets the the value change (with iCustom I guess) and sends an alert (popup, push, etc.).

Is it also possible to have something like that which monitors multiple pairs and multiple time frames (maybe like a dashboard but only for XO). Such as, 5 different pairs and sends an alert whenever any one of these pairs has a changed value (in XO indicator) in 1m, 5m, 15m or 30m time frames.

Thanks very much...

and the last one for today
here is another idea for an Indi which I find also useful:
-Block all Indis which are typed in the Indicator window
(maybe with the type of colored Buttons in the upper middle of the Chart in the attached pic from cja ;B1(meansIndi1);B2;B3,.......??)
The Indi should Block other Indis which the Trader could type in the Indicator window for a specific amount of time or with true/false -Feature in the Indi-window.
This helps because the Trader could first let her/his eyes decide if there is a valid Setup (or not) and than with RE-BLOCKING the other Indis take a help from those.
I am sure that this helps other Traders,too.
Thanks for an info if this is codeable and hopefully some coder will see a need for this one,too.
Reg.Zack
http://www.forexfactory.com/attachme...1&d=1464172914

Hi cja,
thanks for your hard work.
The Indi is working nicely but I can only hide new (self-drawn) HLines and not old ones or HLines drawn from an Indi.
Could you please have a look again.
Thanks
Reg.Zack

Thanks for your share Mate

This is your original request
What I need is an Indicator that disappearing and appearing just the horizontal lines with certain colors (up to 10 colors customizable).
and that is what I coded.

With the clean chart horizontal lines nmc indicator each HLine has its own unique identity and colour set to it otherwise when you remove 1 line all the others would also be removed which is what happens with the original clean chart nmc indicator. I can not see any simple way of identifying each individual HLine drawn from other indicators or sources.

Hi,
i'm a newbie on this forum and read a lot posts, find nice EAs and good comments but still not find one that is satisfying my trailing strategy, i would like to get out of negative area or reduce loss as soon as possible by using trail stop even when market price is on the negative area

I'm looking for a good trailing stop EA that manage Stop Loss before price goes in profit, if you could recommend one
else if not yet available i would like to know if it's possible to code this type of EA or improve a similar one as following :

Parameters:

-TrailEvenInLoss: Y/N
'Y' means if after entry , market price goes against me, when it starts to reverse in my direction on the negative area, trailing stop is triggered even if market price is below entry price

Whatever the move in my direction starts in positive area and trail there as first step then goes in negative area and reverse in my direction , trail stop is also triggered as a second step
Whatever the move in my direction starts in negative area and trail there as first step then goes in positive area , trail stop is also triggered

'N' means trailing stop is triggered ONLY when market price is above entry price

-TrailStopAt: x pips
from market price in my direction
- TrailStopMovesBy: y pips

StopLoss moves by y pips at each TrailAt target

- AddFactorOnTrailStopBy:m ( multiplicator)
This parameter could be used to accelerate or slow the Trailing Stop
at first TrailStopAt, TraiStopAt = x pips
at second TrailStopAt, TraiStopAt = (x pips) * m
at third TrailStopAt, TrailStopAt = (x pips) *m*m
etc...

- ReInitializeTrailStopWhenOverPrice: Y/N
'Y' means:
- if the new Stop Loss calculated during the trailing process with AddFactorOnTrailStopAt is above market price and below BreakEven
the Trailing Stop is re-initialized then:
the calculation restarts from first TrailStopAt, and propose a new Stop Loss based on original TrailStopAt
else if modification refused, Stop Loss does not change ( waiting next bounce)

- if the new Stop Loss calculated during the trailing process with/without AddFactorOnTrailStopAt is above market price and above BreakEven
the Trailing Stop is re-initialized at BreakEven or previous Stop Loss (if this previous one is above BreakEven)
else if modification refused, Stop Loss does not change (waiting next bounce)

- StopTrailingAtBE:Y/N stop trailing if this parameter TrailEvenInLoss=Y means when Stop Loss equal or superior of BreakEven the Trailing Stop is stopped at BreakEven or the last accepted Stop Loss in positive area else inactive

- AddPipsAtSLIfEqualBE: z pips to add to SL when it's equal to Break Even
else if modification refused, Stop Loss does not change (waiting next bounce)

Best regards

I'm not sure I fully understand what you are looking for but maybe this might help? It's quite a complex trade manager. Don't ask me how to use it. Some things I do know how to use, other inputs, I just leave alone because I am not 100% sure of its full functionality.

Daniel

Hello All can some one plz help me
i wanna code a simple median INDC that takes the prev day 1H candles High and low's (24 candle) with ability to change the TF for like 4h for week high/low or 1day for month high/low
and draw a box for the median high/low

and skip and enable Sunday's