xTDI Cross-EA | Page 3 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

Looking for Death Cross and Golden Cross indicators 4 replies

Rsi cross indicator? (NOT cross 50, etc) 44 replies

Royal Cross/Fresh Cross 7 replies

Ea to be developped on cross ema 15 and 40 8 replies

BunnyGirl Cross system 37 replies

Attachments: xTDI Cross-EA
Exit Attachments

xTDI Cross-EA

  • #41
  • Jun 12, 2014 9:01pm Jun 12, 2014 9:01pm
Quoting fxdaytrader_
{quote} thanks (just closed it, in profit, I want to go out for some drinks now and I am not sure if I will be trading tomorrow (and I do not want to keep it open over the weekend), so imho it is better to be flat now)
Do that,fxdaytrader...You really deserves it after what you are doing in this thread....
  • #42
  • Edited 10:37pm Jun 12, 2014 10:24pm | Edited 10:37pm
Quoting fxdaytrader_
{quote} thanks (just closed it, in profit, I want to go out for some drinks now and I am not sure if I will be trading tomorrow (and I do not want to keep it open over the weekend), so imho it is better to be flat now)


I have back tested with 24 hr setting and it has improved results but with increase DD. I am attaching tester report for your reference. Some time I was getting error 1 while modification of order with Two step order. With One step order ea with TP -0 to use JSL, ea is putting order price as TP. Please resolve this two errors.


I have noticed that if we make BE flexible by following then it may improve results.

USING ATR(14) - Difference of current Max and Min and round no of the same can be kept as BE pips.

For example, currently EURJPY ATR(14) Max-0.4128 Min -0.2107 so difference is 0.2021 so round no 20 pips should be BE pips automatically kept by EA if Auto BE is set in EA. Attached image for reference.

Priorities to take this ea into next higher level should be as per below

1) BE based on ATR as per above
2) Maximizing profit to be included
3) EA should double lot size once equity has been doubled. And doubled lot size should be constant till the time equity doubled again.
3) SSRR - I have been backtesting looking at RR using SSRR but it seems that it may not improve ea in terms of pips. So if not included then its okay.
Attached Image(s) (click to enlarge)
Click to Enlarge Name: StrategyTester.gif Size: 9 KB
Click to Enlarge Name: eurjpyh4.png Size: 33 KB
Attached File(s)
File Type: zip Tester.zip   30 KB | 526 downloads
  • #43
  • Jun 13, 2014 3:25am Jun 13, 2014 3:25am
The BE-stuff sounds interesting, I have never seen it before.
So as external input we should have something like "SetToBEWhenATRDiffEqual=20.0";
and an input how many pips to lock in, for example "BeProfitPips=5.0" (if the SL should set to BE+5 pips).

hm, I would NOT double the lotsize, better we implement some "Lots per risk"-feature, so if the ea is profitable the lotsize will increase steady ...

hehe, I see that my target (Ma 144/Ma200 on H1) was hit some hours ago. So I would have earned more if I would not have closed the trade yesterday. But no problem, next entry will come (and today I am not trading, later my brother and his girlfriend come around for a visit, etc.).

But I am looking forward that I can deliver some results until the markt opens on sunday ...
PM me with coding requests and I'll probably put you on my ignore list
  • #44
  • Edited 4:40am Jun 13, 2014 4:21am | Edited 4:40am
Quoting fxdaytrader_
The BE-stuff sounds interesting, I have never seen it before. So as external input we should have something like "SetToBEWhenATRDiffEqual=20.0"; and an input how many pips to lock in, for example "BeProfitPips=5.0" (if the SL should set to BE+5 pips). hm, I would NOT double the lotsize, better we implement some "Lots per risk"-feature, so if the ea is profitable the lotsize will increase steady ... hehe, I see that my target (Ma 144/Ma200 on H1) was hit some hours ago. So I would have earned more if I would not have...
You might have misunderstood me on BE STUFF. Difference should be set as BE pips so that price can breath and same time it minimises losses.ext parameter should be SetToBE as ATRDIFF=TRUE. You may add risk % stuff. Please find link for artical on moneymanagement to have idea about why I do not prefer the same. http://www.learntotradethemarket.com...-forex-trading Enjoy
  • #45
  • Jun 13, 2014 5:28am Jun 13, 2014 5:28am
How about combining this great EA with the Semafor indicator? What are ur thought guys?
  • #46
  • Jun 13, 2014 5:35am Jun 13, 2014 5:35am
I am not interested, if Xaphod is he will do it, but I assume he is also not interested (because if he was it, he would have done it already) ...
PM me with coding requests and I'll probably put you on my ignore list
  • #47
  • Jun 13, 2014 8:23pm Jun 13, 2014 8:23pm
Quoting manoj_3986
{quote} You might have misunderstood me on BE STUFF. Difference should be set as BE pips so that price can breath and same time it minimises losses.ext parameter should be SetToBE as ATRDIFF=TRUE. You may add risk % stuff. Please find link for artical on moneymanagement to have idea about why I do not prefer the same. http://www.learntotradethemarket.com...-forex-trading Enjoy
Dear Fxdaytrader,
Further to above,

As you have mentioned, if difference of ATR is above 0.20 then only ea takes trade to avoid very tight range market. This may help us to reduce dd.

Thanks
Manoj
  • #48
  • Jun 15, 2014 5:55am Jun 15, 2014 5:55am
Quoting fxdaytrader_
just a little bit of offtopic: Ok, I had a few minutes and played around with the S/R-stuff. I think I got it now, so I have done a simple EA to show how it could work, maybe somebody has a use of it. The EA does NOTHING except writing a comment containing the latest support/resistance.
I got some sparetime and worked on the get-Support/Resistance-Levels stuff (I have attached the .mq4 also, maybe somebody has a use for it).
It seems to work and should be ready getting implemented into the xTDI-EA (next step).
Attached File(s)
File Type: ex4 SS_SupportResistance_v04c Line MTF mod.ex4   18 KB | 575 downloads
File Type: mq4 Get-SS_SupportResistance_EA.mq4   6 KB | 644 downloads
File Type: ex4 Get-SS_SupportResistance_EA.ex4   8 KB | 460 downloads
PM me with coding requests and I'll probably put you on my ignore list
  • #49
  • Jun 15, 2014 6:10am Jun 15, 2014 6:10am
Quoting fxdaytrader_
{quote} I got some sparetime and worked on the get-Support/Resistance-Levels stuff (I have attached the .mq4 also, maybe somebody has a use for it). It seems to work and should be ready getting implemented into the xTDI-EA (next step). {file} {file} {file}
Thanks.I will get back to you after testing. I hope error 1 while modification of order and order price as tp in one step order when tp=0 have been resolved in this.
  • #50
  • Edited 9:23am Jun 15, 2014 7:20am | Edited 9:23am
attached the mod.-version 1.2 of the xTDI EA (I will not post the mq4-file)
pls. note that I added some more userinputs, the lotsize-per-risk-stuff and the support/resistance for sl/tp (optional) stuff. further you can disable the tdi and/or the stoch and the limitation of maximum trades per day.

I attach the required indicators again to prevent confusion ...
NOTE that you must attach the ss_Support/Resistance-Indicator to your chart ...
@manoj:

I have added the be-stuff, per default it is enabled (UseAtrDiffAsBEPips = TRUE):
you can use BEAtrDiffMultiplier also, if it is = 1.0 it is disabled ...
if the difference-pips is < than MinAtrDiffPips, then MinAtrDiffPips will be used (only if AdjustToMinAtrDiffPips=TRUE)
there is also a check to see if BreakEvenPips is > than BreakEvenProfit (otherwise it would cause errors) ...

just in case (should never occur) there is no atr highest/lowest value found, it will use Ask for the high and/or bid for the low value, ...

edit: I think I have improved the advanced-BreakEven function:
it SetBreakEvenProfitAccordingly = TRUE then it takes the BE-value and subtracts % of it to get the breakevenprofit (default: SubtractPercentOfBEforBEProfit = 75.0). if that calculated profit is < than breakevenprofit (default: 7.0) the breakevenprofit-value will be used.

that should make more sense.

edit: pls re-download again ...

I think more I will NOT do on this EA
Attached File(s)
File Type: ex4 SS_SupportResistance_v04c Line MTF mod.ex4   18 KB | 552 downloads
File Type: ex4 TDI Red Green.ex4   6 KB | 514 downloads
File Type: ex4 xTDI Manoj Cross-EA v1.2 mod.ex4   30 KB | 540 downloads
PM me with coding requests and I'll probably put you on my ignore list
  • #51
  • Jun 15, 2014 7:28am Jun 15, 2014 7:28am
Quoting manoj_3986
I hope error 1 while modification of order and order price as tp in one step order when tp=0 have been resolved in this.
If there was such an error it is still there because I have not changed the ordersend-routine ...
PM me with coding requests and I'll probably put you on my ignore list
  • #52
  • Edited 8:02am Jun 15, 2014 7:36am | Edited 8:02am
Quoting fxdaytrader_
attached the mod.-version of the xTDI EA (I will not post the mq4-file) pls. note that I added some more userinputs, the lotsize-per-risk-stuff and the support/resistance for sl/tp (optional) stuff. further you can disable the tdi and/or the stoch and the limitation of maximum trades per day. I attach the required indicators again to prevent confusion ... NOTE that you must attach the ss_Support/Resistance-Indicator to your chart ... since I still do not understand your BE-suggestion and do not want to mess around with this I have not tried to add...
for Atr 14(default in mt4)For example , ea look back atr 14 value of last 30candles of h4, max atr14 is 80 pips and mini 60pips. Ea should put difference of 80pips and 60 pips that is 20 pips as BE pips. So once price move 20pips in favor then ea change sl to be.If diff is not round no then ea should get value of round no.Once Be pips is set then it wikk not change till next order.I hope this will help to understand.
  • #53
  • Jun 15, 2014 7:56am Jun 15, 2014 7:56am
Quoting fxdaytrader_
{quote} If there was such an error it is still there because I have not changed the ordersend-routine ...
Please resolve this whenever you get some time for the same.
  • #54
  • Jun 15, 2014 8:15am Jun 15, 2014 8:15am
ok, I think I got it, pls. re-download the ea at http://www.forexfactory.com/showthre...15#post7537015
the ordersend-error-thing should also be fixed now
PM me with coding requests and I'll probably put you on my ignore list
  • #55
  • Jun 15, 2014 8:24am Jun 15, 2014 8:24am
Quoting fxdaytrader_
ok, I think I got it, pls. re-download the ea at http://www.forexfactory.com/showthre...15#post7537015 the ordersend-error-thing should also be fixed now
Thank you very much for all your help for development of this ea. I will try different settings and will post optimised settings.
  • #56
  • Jun 15, 2014 8:31am Jun 15, 2014 8:31am
ok, maybe you want to re-download the ea again, I have added "AdjustToMinAtrDiffPips". If it is =FALSE it should wait until there is a proper diff ...
PM me with coding requests and I'll probably put you on my ignore list
  • #57
  • Jun 15, 2014 9:24am Jun 15, 2014 9:24am
hm, I am sorry but you should download it again: http://www.forexfactory.com/showthre...15#post7537015
pls. read that post for the newest mod ...
PM me with coding requests and I'll probably put you on my ignore list
  • #58
  • Jun 15, 2014 10:49am Jun 15, 2014 10:49am
I have found a small bug and mod. some things, so attached version 1.3, pls. download the indicators (required!) at http://www.forexfactory.com/showthre...15#post7537015

note that the ea deals with different timeframes. the stoch-settings are adjusted to reflect d1 on h4.
if you plan to use the ea on other than the H4 timeframe you may adjust the settings / timeframes ...
Attached File(s)
File Type: ex4 xTDI Manoj Cross-EA v1.3 mod.ex4   33 KB | 514 downloads
PM me with coding requests and I'll probably put you on my ignore list
  • #59
  • Jun 15, 2014 10:31pm Jun 15, 2014 10:31pm
Quoting fxdaytrader_
I have found a small bug and mod. some things, so attached version 1.3, pls. download the indicators (required!) at http://www.forexfactory.com/showthre...15#post7537015 note that the ea deals with different timeframes. the stoch-settings are adjusted to reflect d1 on h4. if you plan to use the ea on other than the H4 timeframe you may adjust the settings / timeframes ... {file}

Dear Fxdaytrader,

I am still getting error 1 while modification. Please find attached image of the same.

Thanks
Manoj
Attached Image (click to enlarge)
Click to Enlarge Name: Untitled.jpg Size: 434 KB
  • #60
  • Jun 16, 2014 12:40am Jun 16, 2014 12:40am
hm, that errors occour while setting to breakeven or moving the jumping stop, not on ordersend.

I did not get that errors (maybe I must try some times and perhaps also get them). But when I have time I will try to find the reason for them.
PM me with coding requests and I'll probably put you on my ignore list
0 traders viewing now