FXM and TTM | Page 44 | Forex Factory

Options

Go to
Permalinks
Print Thread

Similar Threads

TTM Squeeze 8 replies

Ttm Squeeze 0 replies

Attachments: FXM and TTM
Exit Attachments

FXM and TTM

  • #861
  • Oct 31, 2017 9:15pm Oct 31, 2017 9:15pm
Quoting flaw
{quote} If I see some long bars I add trades.
thanks flaw. I love all your examples.
  • #862
  • Oct 31, 2017 9:33pm Oct 31, 2017 9:33pm
Quoting flaw
One of my PC is down so I can only test limited setups. I replaced Trailing for Stop before going to bed. Really glad did that. Bascket was stopped when PA turned. {image} {image} {image} {image} This one is still open. {image} {image}
Do you ever lose on a basket ?
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #863
  • Oct 31, 2017 10:48pm Oct 31, 2017 10:48pm
Quoting FxMadness
{quote} Do you ever lose on a basket ?
Of course I do. I don't post them because it's discouraging. However with your tools the winning rate is high.
Wishing my last name were LESS
  • #864
  • Nov 1, 2017 8:43am Nov 1, 2017 8:43am
Hello FxMadness,

first of all i want to thank you for this powerful tool.
Itīs really very helpful in trading.
In basket trading im a newbie but with your tool i think i can work.
Iīm trying at the moment different Settings.
I have one question - see the screenshot below.
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot2.png Size: 2.8 MB


I bought at 14.06 and set after that a buytouch (reverse) as seen on the screenshot - but this buytouch wasnīt taken by the expert.
So is it possible to add this function to the expert?

Thanks, sweety
  • #865
  • Nov 1, 2017 9:33am Nov 1, 2017 9:33am
Quoting sweety78901
Hello FxMadness, first of all i want to thank you for this powerful tool. Itīs really very helpful in trading. In basket trading im a newbie but with your tool i think i can work. Iīm trying at the moment different Settings. I have one question - see the screenshot below. {image} I bought at 14.06 and set after that a buytouch (reverse) as seen on the screenshot - but this buytouch wasnīt taken by the expert. So is it possible to add this function to the expert? Thanks, sweety
Hi Sweety , sorry to "jump in" ..so , you already have a BUY in progress ..and want to add another BUY while in DD ...is this what you want to do ? . This is a Grid trading approach ..( which is not bad) . I did tried this to play with the toy. It is not possible ( for now) , but what you can do ( I did it ..works ok) is : opening another instance of the same offline chart and load another TTM to it ... so , you can add , martingale , edge ..whatever your trading style is... . your new TTM will have a new magic number generated , so in fact you will be trading 2 baskets of the same pairs , but with ENTRY at different level , you will need an EA that monitor profit dd equity ..maybe TP SL TS .... or just a script close all ..while looking at your terminal pips count ...

EDIT : maybe if you set same magic number for both TTM instance ..would work ...try it and report please ... maybe is just messed up al pip count ...quite sure of this , ..but maybe not.
  • #866
  • Nov 1, 2017 12:14pm Nov 1, 2017 12:14pm
Hi stefdek,

thanks for your answers.
Yes you understood me right, i want to add another buy, while the basket is in DD. I will try it your way and report tomorrow.
  • #867
  • Edited 1:50pm Nov 1, 2017 1:33pm | Edited 1:50pm
Quoting sweety78901
Hello FxMadness, first of all i want to thank you for this powerful tool. Itīs really very helpful in trading. In basket trading im a newbie but with your tool i think i can work. Iīm trying at the moment different Settings. I have one question - see the screenshot below. {image} I bought at 14.06 and set after that a buytouch (reverse) as seen on the screenshot - but this buytouch wasnīt taken by the expert. So is it possible to add this function to the expert? Thanks, sweety
Try this but i do not know if it works.
It is difficult to test because you have to be on the wrong side of a trade for that.

You have to turn the "Only add to positive trades" of in the settings.
Once you are in a wrong trade like this Sell going wrong, click on add to generate add lines.
Then select an add line and drag it (them) to the place you want to add to the wrong trade.

Again not sure if there is coding to prevent this currently, i have to look into it.

Edit, TTM removes the add on bar close, so you do not have to try this for now.
Attached Image (click to enlarge)
Click to Enlarge Name: ttmcounter.PNG Size: 34 KB
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #868
  • Nov 1, 2017 10:24pm Nov 1, 2017 10:24pm
I'm testing something new. When a bascket is closed by reversal I don't refresh it. Instead I open a new bascket with the old selections so I may trade a trend from the beginning.

Attached Image (click to enlarge)
Click to Enlarge Name: 17-11-01-FxPro-2.jpg Size: 175 KB


Attached Image (click to enlarge)
Click to Enlarge Name: 17-11-01-FxPro-H1-2.jpg Size: 120 KB
Wishing my last name were LESS
  • #869
  • Nov 1, 2017 11:56pm Nov 1, 2017 11:56pm
Quoting FxMadness
{quote} Try this but i do not know if it works. It is difficult to test because you have to be on the wrong side of a trade for that. You have to turn the "Only add to positive trades" of in the settings. Once you are in a wrong trade like this Sell going wrong, click on add to generate add lines. Then select an add line and drag it (them) to the place you want to add to the wrong trade. Again not sure if there is coding to prevent this currently, i have to look into it. Edit, TTM removes the add on bar close, so you do not have to try...
Thanks for your answer... I will try it your way ... and will report if it works .
  • #870
  • Edited 4:42am Nov 2, 2017 4:17am | Edited 4:42am
Looking good

Attachment g

Attached Image (click to enlarge)
Click to Enlarge Name: 17-11-01-FxPro-H1-3.jpg Size: 121 KB


Too bad this version of TTM doesn't support multiple "Adds".
Attached Image (click to enlarge)
Click to Enlarge Name: 17-11-01-FxPro-3.jpg Size: 172 KB
Wishing my last name were LESS
  • #871
  • Nov 2, 2017 5:10am Nov 2, 2017 5:10am
The red news has just killed the bascket. The profit is still acceptable.

Attached Image (click to enlarge)
Click to Enlarge Name: 17-11-01-FxPro-H1-4.jpg Size: 119 KB


M5

Attached Image (click to enlarge)
Click to Enlarge Name: 17-11-01-FxPro-M5-1.jpg Size: 134 KB
Wishing my last name were LESS
  • #872
  • Nov 2, 2017 5:29am Nov 2, 2017 5:29am
Quoting flaw
Looking good 2544137 {image} Too bad this version of TTM doesn't support multiple "Adds". {image}
Hey Flaw ,
with the GBP news this morning ..you are now a millionaire .... .

EDIT : oohh , you were SHORT on GBP , so I forgot you were trailing ..so the UP momentum just hit your TS... sorry , anyway it was a good ride.
  • #873
  • Nov 2, 2017 5:39am Nov 2, 2017 5:39am
Quoting stefdek
{quote} Hey Flaw , with the GBP news this morning ..you are now a millionaire .... . EDIT : oohh , you were SHORT on GBP , so I forgot you were trailing ..so the UP momentum just hit your TS... sorry , anyway it was a good ride.
If I set the stop properly before the news I could still be a millionair lol.
Wishing my last name were LESS
  • #874
  • Nov 2, 2017 6:37am Nov 2, 2017 6:37am
Quoting stefdek
{quote} Hey Flaw , with the GBP news this morning ..you are now a millionaire .... . EDIT : oohh , you were SHORT on GBP , so I forgot you were trailing ..so the UP momentum just hit your TS... sorry , anyway it was a good ride.
He wishes he was short on the sterling.....
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #875
  • Nov 3, 2017 6:05am Nov 3, 2017 6:05am
Sorry but can i ask a few questions?

1. I did not set a target profit initially for a 'buy' trade. After going up for some pips, i decided to go to sleep and set a profit line..but the profit line is now below the current price. When i try to drag the profit line higher up, it closes my trades at the current price. How could I circumvent this problem?

2. For the add line, is it added when the price touches it or break? Because sometimes it opens extra trades at the 'add' lines but sometimes it do not. And I am sure the spreads are within limit. A bit confused with the add lines.

Thanks!
  • #876
  • Nov 3, 2017 8:20am Nov 3, 2017 8:20am
Quoting kbkm
Sorry but can i ask a few questions? 1. I did not set a target profit initially for a 'buy' trade. After going up for some pips, i decided to go to sleep and set a profit line..but the profit line is now below the current price. When i try to drag the profit line higher up, it closes my trades at the current price. How could I circumvent this problem? 2. For the add line, is it added when the price touches it or break? Because sometimes it opens extra trades at the 'add' lines but sometimes it do not. And I am sure the spreads are within limit....
2. That depends on the settings, both break and touch are possible.
Attached Image


1. is a bit unclear to me but is sounds that the trades where not automatically closed even after the take profit line was reached ?
Did you allow the robot to close trades ?
Attached Image


I think that you don't have a screenshot but could you next time make one, a picture says more that a thousand words.
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #877
  • Nov 5, 2017 7:45pm Nov 5, 2017 7:45pm
Thanks for the reply fxm. I will include a pic the next time.
  • #878
  • Nov 7, 2017 3:12pm Nov 7, 2017 3:12pm
Attached Image (click to enlarge)
Click to Enlarge Name: Screenshot_8.png Size: 60 KB


Hello fxm,

Sorry but can I ask something. Looking at the profit/loss of each pair, why does it not all add up to the total profit/loss? I know I am overlooking something simple.
  • #879
  • Nov 7, 2017 10:10pm Nov 7, 2017 10:10pm
Quoting kbkm
{image} Hello fxm, Sorry but can I ask something. Looking at the profit/loss of each pair, why does it not all add up to the total profit/loss? I know I am overlooking something simple.
The total profit under P/L is calculated using the profit the broker reports in the Account History.
That is the profit +/- swap and -commissions so the net profit.

If you click on the small [p] button the p/l is given in account currency and should match up with what your broker is reporting.
I can calculate the movement of stars, but not the madness of men. Isaac N.
  • #880
  • Edited 4:32am Nov 13, 2017 2:29am | Edited 4:32am
Hi Fxmadness,
Today I have built a chart with only two pairs as selected by indicator.
EURCHF SELL
AUDNZD SELL

why when the chart shows a break to the downside and i use the ea and take a sell why does it select a buy for both pairs ? it looks like chart is upside down.
I was trying to time the entry of xm7 ea today ,but based on your chart this would not be possible i would have to reverse everything.

when EURCHF and AUDNZD drop in price your chart rises.

Thank you.
D.
0 traders viewing now